Categories

Best Metalworking Arbors

New Replacement After Market V-Belt 1343756 1343782 Delta Drill Press 11-990 K 32.5

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Delta Model 11-990 Type 1.
Check Stock

RUB1ZR0 Boresighter Kit Precision Alignment Bore Sighter with 16 Pieces Adjustable Arbors

  • Our bore sighter kit is suitable for air guns and shotgun with a short range（less than 100 yards). It contains a multi-caliber collimator and different arbors..
  • This kit includes 15 arbors for .177, .22, 6mm, .25, 6.5mm, .27, 7mm, .30, .32, .338, .35, .375, .44, .45, .50. It also contains a screwable arbor from 12 to 20..
  • The boresighter kit makes sighting much easier by aligning the scope's reticle with the barrel. Help you pre-zero easily without wasting ammo or range time..
  • The boresighter and different arbors are nicely packaged in a blow-molded case. The box is marked with a scale and can be easily put back after use..
  • No longer need to purchase a separate bore sight to match the use of different products. This kit is a good beginner kit if you don't know where to start..
Check Stock

Lenox Tools 1779810 3.25-Inch Pilot Drill Bit for Hole Saw Arbors

  • Drill bit is compatible with 2L, 5L and 6L SNAP-BACK arbors.
  • Fits 2L, 3L, 5L, 6L and 7L solid-hex arbors.
Check Stock

Wood Lathe Drill Chuck Fits - Jet 1440Vs Wood Lathe - 3/4 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Jet 1440Vs Wood Lathe.
Check Stock

Metal Lathe Drill Chuck Fits - Grizzly G8688 Metal Lathe - 1/2 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Grizzly G8688 Metal Lathe.
Check Stock

Lenox 1864904 Pilot Drill Bit for Hole Saw Arbors (Pack of 25), 3 1/4"

  • The split-point pilot drill penetrates quickly, self-centers, and won't "walk" across the work surface.
  • Use with 1L and 4L Solid Hex Arbors and 2L Hollow Hex Arbors..
Check Stock

IVY Classic 28112 Hole Saw Arbor Adaptor, Adapts 1/2-Inch - 20 thread to 5/8-Inch - 18, 1/Card

  • Adapts 1/2"-20 threaded arbors to fit 5/8" - 18 threaded hole saws.
  • Adapts 28100, 28103, 28104, 28105 and 28108 arbors to fit 1-1/4" through 6" hole saws.
  • Hex flange for easy installation and removal.
Check Stock

POWERTEC 110680 4 x 36 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper – 10 Pack

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts – Ultra Fine Grits – 4 Pack Assortment

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

LENGO Bore Sight Kit Precision Firearm Bore Sighter Rifle Boresighter with 16 Pieces Adjustable Arbors for Hunting or Shooting Scope

  • [Widely Use]: This bore sight kit includes 16 arbors and comes with caliber: .177, . 22, 6mm, . 25, 6.5mm, . 27, 7mm, . 30, . 32, . 338, . 35, . 375, . 44, . 45, . 50 and 20mm. Choose a suitable arbor, though the spring clip is hard the first time..
  • [Simple Operation]: Boresight kit is easy to set up. When you are using the arbors to have a loose fit, you can wrap a cloth or something around them to make a snug fit. This also helps protect the inside of the barrel..
  • [Save Your Time and Ammo]: Boresighter kit will help you to boresight scope for speedy pre-zeroing and will get your scope as close to sight in as possible without shooting..
  • [Professional Equipment]: The rifle bore sighter kit is 36-42mm above the barrel, the height is matching of your optics, so it will make sure you get the accuracy..
  • [Convenient package]: The Hunting Boresighters and 16 arbors are conveniently packaged in a case. You can readily choose what you require and put it back after use..
  • [Note]:This bore sight kit is not suitable for all gun, please see the use range, as professional equipment, please follow the manufacturer’s instructions before use..
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

  • Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

HQRP On-Off Toggle Switch compatible with Delta 489105-00 11-900 11-950 11-980 11-985 11-990 14-040 17-900 DP400 DP300L 17-950L Drill Press, 34-670 36-600 36-977 36-978 36-980 36-981 TS200LS Table Saw

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Delta Model 11-990 Type 2.
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock