Categories

Best Metalworking Machines

Genmitsu 4 Pack Hold Down Clamp Kit, CNC Router Clamp for Woodworking and Metalworking, 3-7/20''L x 4/5'' W x 2-7/10''H, Compatible with CNC Router Machine PROVerXL 4030 &3040 Extension Spoilboard

  • Feature: This clamp can be used on a T-Slot Aluminum Spoilboard, and also can be used on Threaded MDF Spoilboard with pre-installed threaded holes (4mm (0.16'')) . Compatible with Genmitsu PROVerXL 4030 CNC router kit, 3040 Extension Spoilboard, as well as other large CNC machines. Just make sure the size of T-Slots/ holes on your Spoilboard can be compatible with this clamp..
  • Dimensions: This clamp is 85mm length x 20mm width x 68mm height. (3-7/20''L x 4/5'' W x 2-7/10''H)..
  • Working range: This clamp accommodates material up to 35mm (1.38'') thick and holds it firmly in position. It can hold a variety of materials for desktop CNC router machines..
  • Sturdy Quality: Constructed of High Strength Cold Rolled Sheet for durability and wear resistance..
  • Versatility: This clamp provides exceptional clamping forces for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..
Check Stock

3" Screwless Vise plus Parallels and Mounting Clamps - The Body and Jaws are Hardened to Rc 58-62 - All Sides are Flat, Square and Parallel to 0.0002", LittleMachineShop.com (3763)

  • Compatibility: This product is designed to work across a broad range of metalworking machines including most top brand names. Please look at our images to see a list of compatible machines. The list of machines are those where the machines' specification ensure compatibility. If you don’t see your machine in the list, it is almost certain this product will NOT WORK on your machine. In this event, please contact us before purchasing, as we may have alternate options..
  • Thin Parallels: The thin parallels are 1/8" thick and 3" long. The heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8". They are made of high grade alloy steel hardened to 52 to 58 Rc . The top and bottom of each parallel is parallel within 0.0002". The pairs are matched in height within 0.0004"..
  • Clamps: The pair of clamps is used to mount a screwless vise on your mill table. You furnish T-slot nuts and socket head cap screws (up to 3/8" diameter) of the appropriate length for your mill. These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16") ....
Check Stock

Genmitsu 4PCS T-Track Mini Hold Down Clamp Kit, Compatible with 3018-PRO/3018-MX3/3018-PROVer CNC Router Machine

  • MATERIAL: The hold down clamp kit is constructed of Zinc-Aluminum Alloy for durability and wear resistance.
  • DIMENSIONS: This clamp is 50mm length x 20mm width x 56mm height..
  • DESIGN: The size of the slot block of the clamp is designed for Genmitsu 3018 series CNC router. It can also fit ALL other 3018 series desktop CNC router perfectly..
  • FEATURE: The clamp accommodates material up to 30mm and holds it firmly in position. It can hold most of the material for desktop CNC router machines..
  • VERSATILITY: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..
Check Stock

Genmitsu 4PCS T-Track Hold Down Clamp Kit + 2PCS T-Track Mini Hold Down Clamp

  • 4PCS T-Track Hold Down Clamp: The hold down clamp kit is constructed of Zinc-Aluminum Alloy for durability and wear resistance.
  • DIMENSIONS: This clamp is 50mm length x 20mm width x 56mm height..
  • VERSATILITY: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..
  • 2PCS T-Track Mini Hold Down Clamp: Compact design perfect for use with the T-slots on desktop CNC machines like the 3018 series..
  • Dimensions: This clamp is 65.3mm length x 20mm width x 50mm height. (2.57 x 0.79 x 1.97in) Working range: The clamp accommodates material up to 1.77'' thick and features easy to tighten knobs for quick installation or removal of stock material..
Check Stock

3Pcs Magnetic Small Bubble Levels 52x20x15mm Three Line High Precision Square Spirit Level Measuring Tools for Leveling Trailer, RV, Machine, Picture Hanging, Magnetism

  • Three line design, high precision measurement instrument tool. Magnetic small bubble levels 52x20x15mm three line high precision square spirit level measuring tools for leveling trailer, rv, machine, picture hanging etc..
  • Magnetism on the backing, Magnetic function. Magnetic bubble level with magnet on the bottom can absorbed onto the iron- or steel-surface for leveling measuring..
  • 52mm square bubble level used to level measurements in building, landscaping, fencing, surveying, building trades, engineering..
  • Square Bubble Level 52mmx20mmx15mm spirit level three line high precision degree mark surface level bubble for measuring instrument..
  • The square level can be used to level any surface, ideal for leveling metalworking, equipment, appliances, washing machines, home furnishing etc..
Check Stock

Genmitsu 2PCS T-Track Mini Hold Down Clamp Kit, CNC Router Clamp for Woodworking and Metalworking, Compatible with 3018 CNC Router Machines, 3018-PRO/ 3018-PROVer/ MX3, 2.57’’Lx 0.79’’Wx 1.97’’H

  • Mini Size：Compact design perfect for use with the T-slots on desktop CNC machines like the 3018 series..
  • Dimensions: This clamp is 65.3mm length x 20mm width x 50mm height. (2.57 x 0.79 x 1.97in).
  • Working range: The clamp accommodates material up to 1.77'' thick and features easy to tighten knobs for quick installation or removal of stock material..
  • Sturdy Quality: Constructed of High Strength 6061 Aluminum Alloy for durability and wear resistance..
  • Versatility: This clamp provides exceptional clamping forces for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more..
Check Stock

POWERTEC 110680 4 x 36 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper – 10 Pack

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts – Ultra Fine Grits – 4 Pack Assortment

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

  • Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

Mixiflor 40Pcs Cone Shape Abrasive Sandpaper 1/4 Inch Shank Flap Wheels 80/120/180/240/320 Grits Aluminum Oxide for Removing Rust Deburring Polishin

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die....
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and....
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects....
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and....
  • YOU WILL GET: 6*15mm Cone Shape Abrasive Sandpapert - 5 Different Sanding sizes ‒ 8 pcs of each 80/120/180 /240/ 320 grits.
Check Stock

BEAMNOVA Universal Metal Bender Set High Precision Benchtop Manual Rebar Scroll Wire Bending Machine for Copper Tube Iron Aluminum Steel Brass

  • MULTIPLE PURPOSE - BEAMNOVA universal metal bender is a multiple functional metal bending machine, which can be used to produce grids, doors, gates, balcony railing, patio furniture as well as wrought iron lamps..
  • BENDING DIFFERENT KINDS OF MATERIALS. - BEAMNOVA manual scroll bender is designed to cut different kinds of metal material, such as steel, brass, copper, aluminum, etc..
  • IDEAL FOR METALWORKING & REPAIR SHOPS - BEAMNOVA rebar bender is heavy-duty, but at the same time portable and easy to use, which makes it an ideal tool for repairs shop and metalworking shops..
  • GREAT BENDING CAPACITY - In terms of flat steel, BEAMNOVA metal bending machine can perform at 1.18” x 0.394” (30x10 mm).
  • as to round steel and square steel, it can bend 0.394”..
  • DURABLE DESIGN WITH EASY OPERATION - BEAMNOVA universal metal bender is assembled with heavy materials that can last for many year’s use. You can mount it onto a workbench or floor, increasing the flexibility of metal bending process..
Check Stock

35 Pack 1/4 Abrasive Flap Wheel Sander Set WENORA 80 Grit Aluminum Oxide Flap Wheels Cylindrical Shape Sanding Wheel 7 Sizes

  • 【PREMIUM MATERIAL】 High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • 【SHANK DESIGN UPGRADE 】 we upgraded the ordinary round shank to 1/4-Inch hex shank to improve the firmness at high speeds. Even in large-area heavy-duty machining, there will be no loosening or slipping..
  • 【METALWORKING APPLICATIONS】 The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces.
  • 【WOODWORKING APPLICATIONS】These abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders and.for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
  • 【VARIETY OF WHEEL SIZES】Our 35 piece set includes (5) 1” thick sanding wheels with 1/4” hex shank in each of the 7 different sizes.
  • 0.78", 1", 1.2", 1.58", 2", 2.36" and 3.14" widths.
Check Stock