M12-1.75 x 30mm Hex Head Bolts Hexagon Screws, Class 12.9 Alloy Steel Black Oxide Finish, Full Thread, 10 PCS
- WIDE APPLICATION : The hex bolts can be used for different kinds of furniture such as cribs, cupboards, wardrobes, bunk beds, etc. It also good for office appliance, communication equipment, ship assembly and other machinery industry..
Check Stock14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4
- ...plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
- Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
- Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
- 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
- Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
- Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA
- Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
- Ideal for restoring the stripped threads on old, rusty nuts and bolts.
- Hex shape makes taps and dies easy to turn with any socket or wrench.
- Can be used on national coarse, national fine and metric nuts and bolts.
- Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.
Check Stock4 Sets Furniture Legs Mounting Plates with Hanger Bolts Screws Great for Furniture Leg,Chair, Sofa,Cabinet,Couche, Set of 4
- Pack list: 4 Pcs M8 hanger bolts, 12 Pcs screw. Note: Our products belong to the metric M8 hanger bolts. If you find that you can’t screw the hanger bolts, the accessories may not match (the imperial system does not match the metric system). You can check it carefully before purchasing. If there is a purchase error, please contact us in time. You can get a refund for free..
- Widdly use:The furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
- Easy to Install: Sofa leg mounting plate sets protect the furniture legs effectively, make your furniture more durable..
- Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place..
- Complete accessories: No need to purchase hanger bolts separately. You can follow the plan to install immediately,When you install product and found any questions,please contact us in time,Our after-saler team will support you immediately..
Check StockStainlesstown Nut Bolt Thread Gauge (Red)
- Measures diameter, thread pitch & length of nuts, bolts & screws.
- Measures fractional bolts from size #4 to 1" up to 7" long.
- Measures metric bolts & screws from size 3mm to 22mm.
- Made of very durable 1/4" thick hard plastic.
- 1/4" thick x 8-3/4" Long x 3-3/8 Wide Color: Red.
Check StockStainlesstown Nut Bolt Thread Gauge (Blue)
- Measures diameter, thread pitch & length of nuts, bolts & screws.
- Measures fractional bolts from size #4 to 1" up to 7" long.
- Measures metric bolts & screws from size 3mm to 22mm.
- Made of very durable 1/4" thick hard plastic.
Check StockDURATECH Universal Wrench Set, Adjustable Wrench Set, SAE & Metric, 8-inch&10-inch, 44 sizes in 2 Piece, Drop Forged, ANSI standard
- Drop forged, heat treated, double thread, mirror polish, and electroplating. Exceeds ANSI specifications..
- Different sizes meet your different needs. The 8-inch universal wrench fits both standard 3/16 '' to 5/8 '' and metric 5mm to 16mm nuts and bolts.
- 10-inch universal wrench fits both standard 11/16 '' to 1-1/16 '' and metric 17mm to 27mm nuts and bolts, adjust the size by moving the middle push block..
- The working torque reaches 1.2 times of the American standard of the double box end wrench, and the destruction torque reaches 1.4 times of the American standard of the double box end wrench..
- Specialized wrench design allows work on multiple types of fasteners including 6-point, 12-point, square, E-Torx, triangle, and most rounded out fasteners..
- This wrench can do both American standard and Metric. With this total wrench you can do so many thing without the need of changing wrenches of different sizes since this multi facet..
- Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check StockThread Gauge Combo-Mini
- Set includes both Inch and Metric identifiers. Thread sizes are permanently laser etched on each gauge..
- All sizes are steel with a clear zinc finish and each gauge identifies both bolts and nuts..
- Takes the guess work out of thread size and pitch on nuts, bolts , screws, threaded holes and many other threaded items..
- Eliminates costly and time consuming repairs..
- Great for identifying and sorting nuts and bolts in fastener cribs, fastener bins at home or at your facility..
Check StockNut and Bolt Thread Checker (Inch & Metric) Nut and Bolt Size Gauge- 14 Inch & 12 Metric New Individually Assembled Thread Gauge Suitable for Detecting Fixed Bolts or Threaded Holes in Enclosed Areas
- ...ore] Just screw the nut or bolt into the screw thread gauge, it takes you a few seconds to check the size. You do not need to drive forth and back to and from the hardware and auto parts stores for check any more. Also, this nut and bolt gauge is especially well suitable for the distinguish between similar inch and metric threads..
- [Zinc Plated for Inch Size] Includes 14 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20..
- [Black Oxide for Metric Size] Includes 12 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75. (The thread sizes are permanently stamped onto each 26 gauges, inch in black, metric in white)..
- [Get Your Stuff Well-Organized] This nuts bolts organizer has 26 male/female gauges, all are the most used sizes for everyday use, which can help you well and fast sort out your assorted nuts and bolts and get them well organized and neater in your compartment box from misplace and loss. A great little toolbox if you use fasteners a lot or have a box/drawer/stake/garage full of random nuts and bolts..
Check StockCrib Screws Bolts Replacement Hardware Parts Kit Metric M6 Allen Head Crib Bolts Barrel Nuts Compatible with Graco Solano Lauren Benton Hadley Asheville Ashleigh Stanton Cribs
- Allen Head metric M6 Replacement crib screws for your missing baby crib bolts..
- This crib screws hardware replacement kit contains 3x 16mm bolts, 3x 20mm bolts, 3x 30mm bolts, 3x 35mm bolts, 3x 40mm bolts, 3x 50mm bolts, 3x 55mm bolts, 3x 60mm bolts, 3x 65mm bolts, 3x 75mm bolts, 3x 85mm bolts, 20x barrel nuts (D x L: 9.8mm x 12.5mm, 9.8mm x 14.5mm), 4x joint connector nuts..
- This baby bed crib screws hardware replacement kit is compatible with Graco Solano Lauren Benton Hadley Asheville Ashleigh Stanton Convertible Cribs..
- Crib bolts and nuts are made of carbon steel, they are solid replacements parts for your crib..
- There are many types of cribs and there are many different lengths and sizes of bolts to assemble a crib, if you do not know whether this kit will work for your crib, reach out to us for support..
Check StockLicense Plate Hardware Kit 400 Screw Variety Pack, Stainless Steel Screws, Nylon Screw Inserts, Black Screw Covers for Fastening License Plates, Frames and Covers EZ458
- INCLUDES: 50 Thumb Screws 50 Pan Heads 50 Nylon Inserts 50 Hex Head Bolts 50 Hex Slot Head Screws 50 Large Metric Bolts 50 Black Pan Heads 50 Metric Screw Pan.
- New and Improved Heavy Duty Design - Don't settle for Cheap Imitations -Buy from the Industry Leader ✔️ Quality Guaranteed.
- EZ Line Product with Over 60 years serving the Auto Dealer Supplies Community..
- 100% MONEY-BACK GUARANTEE - This fastener kit is backed by our World Class 100% Money-Back Guarantee that you are fully satisfied with your product or receive your money back. All parts in this kit are guaranteed to work and last the lifetime of your vehicle..
- Screws to fit the front license plate frame as well as the back plate screws. Bolts, screws, and thumb screws to fit your license plate fastener needs. License plate cover screw fasteners with a quality promise we stand behind.
Check StockGLOGLOW 10Pcs Damaged Nut Remover Set,Broken Screw Nut Bolt Extractor Kit,Drive Socket 9/10/11/12/13/14/15/16/17/19mm
- Broken Nut Screw Bolt Remover Kit. --This is a set of 10 pieces sturdy tools to help remove nuts, bolts, screw heads, studs, etc.
- Metric Standard. --It fits heads sized 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm and 19mm.
- Application. -- Spiral cut teeth provide a positive grip to remove rounded off painted over and rusted bolts and nuts.
- Material. --Made of hard alloy, they are of strong strength and long durability.
- How to Work. -- These tools can be driven with a metric spanner or socket wrench for fast work..
Check StockOrion Motor Tech Harmonic Balancer Puller Kit, Power Steering Pulley Puller Installer Tool Set, Automotive Steering Wheel Puller Tool Kit, Flange Type Gear and Crank Puller Set
- GEAR PULLER SET: This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance.
- COMPLETE 49-PIECE SET: This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes—1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8x1.25, and M10x1.5—to suit your different needs.
- the 4-slot yoke also allows you to use it for two or three-slot operation with ease.
- DURABLE PERFORMANCE: Each of these crank puller tools is constructed from hardened 45# steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right.
- all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service.
- SCRATCH-FREE OPERATION: Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing.
- WIDE COMPATIBILITY: Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market.
Check Stock