Categories

Best Metric Bubble Flare Tool Kit

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

Inline Tube Replacement for Combination Metric Bubble & 45 Degree Double Flare Tool with Deburring Tool

  • Unique Vise Clamp with removable single flare end to insert the bubble head adapters.
  • 45 degree single, double or bubble flares on soft steel, brass, or aluminum tubing.
  • Includes seven adapters, yoke assembly, bar assembly, and handle in a molded storage case..
Check Stock

ABN Bubble Flare Tool & Double Flaring Kit – Tubing Bender Flare Tool & Pipe Cutter (1/8in to 5/8in / 3-16mm)

  • ....8” x 9.2” inch (30.2cm x 7.1cm x 23.4cm) plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization.
  • Includes double flaring and bubble flaring instructions for use.
  • PACKAGE CONTENTS: Package includes hardened flaring bar assembly clamps with 10 SAE & metric tubing sizes (3/16″, 1/4″, 5/16″, 3/8″, 1/2”, 4mm, 4.75mm, 6mm, 8mm, 10mm), corresponding flaring tool adapter dies, yoke assembly reamer, tube cutter (1/8” to 5/8” / 3-16mm), and a carrying case for your convenience.
Check Stock

Mastercool 99961 4-Way Digital Manifold w/3-60 hoses w/ ball valves

  • GM fuel Line Flare, Brake Lines and transmission 5/16 and 3/8".
  • Flare/double Flare 3/16, 1/4, 5/16, 3/8 and 1/2", metric bubble Flare 4.75, 6, 8, and 10 mm, GM transmission cooling Line 3/8 and 1/2.
Check Stock

Mastercool 72485-PRC Silver/Blue Universal Hydraulic Flaring Tool Set (3/8'&1/2' Transmission Cooling Line Die/Adapter Sets Plus Tube Cutter)

  • GM fuel Line Flare, Brake Lines and transmission 5/16 and 3/8″.
  • Flare/double Flare 3/16, 1/4, 5/16, 3/8 and 1/2″, metric bubble Flare 4.75, 6, 8, and 10 mm, GM transmission cooling Line 3/8 and 1/2.
Check Stock

Eastwood Professional Brake Line Flaring Tool Kit | 45° Degree Single Double & Bubble Brake Tubing Flares | Use with Hydraulic Hose | Ideal for Stainless Steel Tube or Copper Pipe | Inc 4 Split Dies

  • MULTI USE FLARING TOOL: This is an all in one brake line flaring tool kit device. Easily create precision single flare, double flare, or a bubble in your tubing. A high quality OEM style flare is essential, as nobody likes leaks especially in hydraulic, or brake lines. With the Eastwood tubing flare tool you’ll always get quality reliables results time after time!.
  • HOW TO USE: Use stainless steel, steel, or any other soft metal like copper tubing of 3/16-inch, ¼-inch, 5/16-inch, 3/8-inch and 4.75-mm diameter. Meaning this tool is multi purpose and ready to help with automotive brake lines, hydraulic lines, or even with plumbing pipes. Next simply use the rotating turret style flaring die mount to create the suitable flare for your needs..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Always wear eye protection when operating the Flaring Tool as oils, grease and metal particles may be ejected while the tool is in operation. Make sure that th....
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

MASTERCOOL 72450 Double Metric Bubble Flaring Tool Set Black/Silver/Blue

  • Set includes the Upgraded Hydra-Flare Yoke & Pump Assembly.
  • 45 & Double Flaring Adapters and Die Sets.
  • Hydra-Flare Yoke & Pump Assembly has been modified with a tube & die set stabilizing arm for easy form tube forming.
  • Magnetic Adapter holder to keep adapters in place.
  • Equipped with an Enlarged Die Set Compression Area for better grip of dies.
Check Stock

Orion Motor Tech Crowfoot Wrench Set for 8 to 24 mm Flare Nuts, Crowfoot Flare Nut Tool Kit, 15 Piece Large & Small Metric Wrench Set for 3/8\ and 1/2\ Drives Ratchets Extenders for Nut Removal

  • 15 PIECE WRENCH SET: This metric crowfoot wrench set includes 15 flare nut wrenches to specifically reach and manipulate flare nuts on hard-to-reach areas of larger-sized cars, trucks, dozers, tractors.
  • VERSATILE APPLICATION: These multipurpose adjustable wrenches easily remove flare nuts of 15 sizes from 8 mm (5/16 in.) to 24 mm (15/16 in.), working with your torque wrenches to satisfy various vehicle servicing needs.
  • RUGGED CONSTRUCTION: These mechanic repair tools are made from heavy duty structural Cr-Mo steel for reliable strength and durability.
  • the flare nut wrenches are further coated to resist wear, tear, and corrosion under even punishing use.
  • EASY OPERATION: Our flare nut wrenches work well with your 3/8" or 1/2" ratchets, extenders, torque wrenches, or flare nut wrenches to service your machinery quickly and easily.
  • the included blow-molded case provides organized storage for easy transport.
  • 1 YEAR WARRANTY: Orion Motor Tech backs this flare nut tool kit with a strong 1 year warranty and our usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your vehicles for years to come!.
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set Includes 3/8 and 1/2 Transmission Cooling Line Die and Adapter Sets with Tube Cutter Silver/Blue

  • TUBE AND DIE SET STABILIZING ARM for easy tube forming.
  • MAGNETIC ADAPTER HOLDER keeps adapters in place.
  • EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
  • CAN BE USED ON "annealed steel" & "dead soft".
  • INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
  • GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • metric bubble flare 4. 75, 6, 8, and 10mm.
  • GM transmission cooling line 3/8" and 1/2".
  • mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.
Check Stock

XJX Flare Nut Wrench Set Metric | 6-Piece Brake Line Wrenches Set | 9-21 mm | Chrome Vanadium Steel | 15° Offset End | Mirror Polish Finish | Line Wrench Set with Rolling Pouch

  • 【EXCELLENT MATERIAL & DURABLE】: XJX flare nut wrenches are made of heat-treated chrome vanadium steel, which is stronger and more durable.Mirror chrome plated surface anti-rust and anti-corrosion.Exceeds ANSI standard.Extend service life..
  • 【6-POINT】: The classic hex-shaped open head design of the flare nut wrench. Fits five sides of the fastener better. Provides a tight grip and more contact points,anti-slip.More suitable for all kinds of hexagon accessories of automobile and pipeline..
  • 【15°OFFSET DESIGN】: 15° offset design of the head at both ends provides space for knuckles and is ergonomic. Convenient for working in hard-to-reach areas or tight spaces..
  • 【Organizer Box】: The wrench set is equipped with a tool box for easy organization and storage，and easy to carry. Each wrench size is printed on the tool box for easy sorting..
  • 【6-PIECE METRIC】: Metric flare nut wrench set: 9 x 11, 10 x 12, 13 x 14, 15 x 17, 16 x 18, 19 x 21 mm. Meet your daily work needs..
Check Stock