Categories

Best Metric Deep Socket

SATA 212-Piece Ultimate Socket Set 1/4-Inch, 3/8-Inch, 1/2-Inch Drive - ST09511U

  • [VERSATILE SET] 6 Spark Plug Sockets, 23-1/4" Dr. 6PT SAE and Metric Sockets, 19- 1/4" Dr. 6PT SAE and Metric Deep Sockets, 29-3/8" 6PT SAE and Metric Sockets, 24-3/8" Dr. 6PT SAE and Metric Deep Sockets, 39-1/2" Dr. 6PT SAE and Metric Sockets, 29-1/2" 6PT SAE and Metric Deep Sockets, 35-1/2" Dr. 12PT SAE and Metric Sockets, 8-1/2" Dr. 12PT Deep Metric Sockets.
  • [ACCESS] Sockets Feature Off-Corner Loading to Reduce Fastener Rounding.
  • [LONG-LASTING] Full Polish Chrome Finish.
  • Chamfered Opening to Guide Fastener Into Socket.
  • [READABILITY] Large Hard-Stamped Size Identification.
Check Stock

Neiko 02460A 3/4\ Drive Deep Impact Socket Set, 8 Piece Jumbo Assortment | Metric Sizes (26 to 38 mm) | Chrome Vanadium Steel

  • HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
  • LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point Metric sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
  • SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each Metric socket will torque the most stubborn fasteners..
  • HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched Metric size markings allow easy reading in low light settings and promote efficiency on the job..
  • INCLUDES COMMON METRIC SIZES: Includes eight common Metric socket sizes (26, 27, 29, 30, 32, 35, 36, 38 mm) with blow-mold storage case included..
Check Stock

WORKPRO Magnetic Socket Organizer Set, 6-Piece Socket Holder Set Includes 1/4", 3/8", 1/2" Drive Metric SAE Socket Trays, Holds 141 Pieces Standard Size and Deep Size Sockets(Socket not Included)

  • Large Capacity Magnetic Socket Organizer Set: These magnetic socket organizers can store up to 141 metric and SAE sockets and two drive adapters. The kit includes three blue metric magnetic socket organizers and three red SAE magnetic socket organizers for 1/4", 3/8", and 1/2" drives. Used to collect SAE and metric receptacles, but not for impact sockets. Tip: sockets are not included with the holders..
  • Magnetic Base: The magnetic base secures the sockets in their designated places. They won't fall out even if you turn the socket tray upside down. They also allow you to attach the tray to any steel surface..
  • No scratches Installation: The surface of the magnetic base is composed of soft rubber, so there is no need to worry about scratching the surface of your metal tools and sockets, perfect fit for your toolset..
  • Keep Your Sockets Organized: Find the right socket quickly and easily with this magnetic socket holder set. Each tray has a legible label, so you can tell which slot to grab. Instead of finding the socket you want in a disorganized toolbox like before..
Check Stock

ARES 60141 – 8-Piece Metric & SAE Socket Keeper Socket Organizer Tray Set – Black & Red Socket Holders - Store 176 Standard & Deep Sockets - Socket Posts Feature High Visibility Markings

  • SPECIFICATIONS: This socket organizer set is a perfect organization system for your tool storage collection that makes it easy to store your most popular metric and SAE sockets, both standard and deep. Unlike other organizers, these trays feature vertical peg board designs that keep your sockets out of the tool box, immediately identifiable, and exactly where you need them. With this wide range of sizes, you can organize your tool chest with ease. *Sockets are not included with the holder.*.
  • SIZES: This set includes 176 posts with one standard and one deep post for each size. 1/4” drive sizes include a metric range of 4mm to 15mm and an SAE range of 1/8” to 5/8”. 3/8” drive sizes include a metric range of 6mm to 20mm and an SAE range of 1/4" to 1". 1/2” drive sizes include a metric range of 10mm to 27mm and an SAE range of 3/8” to 1-1/4”. For a complete list of included posts, please reference this item’s images for a comprehensive table of sizes..
  • DESIGN: These socket organizers make managing sockets simple.
  • each tray’s vertical posts secure sockets and feature size markings for easy identification. With their unique 2-tray designs for superior organization and mobility, the ½” organizers offer more extensive 1/2” socket st....
Check Stock

GEARWRENCH 110 Pc. 1/4', 3/8' & 1/2' Drive 6 & 12 Pt. Mechanics Tool Set, Standard & Deep, SAE/Metric - 89058

  • 84 tooth ratchet mechanism offers a 4. 3° swing arc for easy access.
  • Contains 12 point full polish long pattern combination wrenches and sockets.
  • Sockets feature off-corner loading design to reduce fastener rounding.
  • Bright, full polish chrome finish easily wipes clean and resists corrosion.
  • Includes blow mold case for storage and organization.
  • Included Components: "3 Ratchets 3 Extensions 10 1/4" Drive 6 Point Standard Sae Sockets 11 1/4" Drive 6 Point Standard Metric Sockets 7 1/4" Drive 6 Point Deep Sae Sockets 7 1/4" Drive 6 Point Deep Metric Sockets 7 3/8" Drive 6 Point Standard Sae Sockets 10 3/8" Drive 6 Point Standard Metric Sockets 7 3/8" Drive 6 Point Deep Sae Sockets 10 3/8" Drive 6 Point Deep Metric Sockets 7 3/8" Drive 12 Point Standard Sae Sockets 7 3/8" Drive 12 Point Standard Metric Sockets 6 1/2" Drive 12 Point Standard Sae Sockets 6 1/2" Drive 12 Point Standard Metric Sockets Spark Plug Socket 4 Sae Long Pattern Combination Wrenches 4 Metric Long Pattern Combination Wrenches".
Check Stock

ARES 60178 – 8-Piece Metric & SAE Socket Keeper Socket Organizer Tray Set – Black & Green Socket Holders - Store 176 Standard & Deep Sockets - Socket Posts Feature High Visibility Markings

  • SPECIFICATIONS: This socket organizer set is a perfect organization system for your tool storage collection that makes it easy to store your most popular metric and SAE sockets, both standard and deep. Unlike other organizers, these trays feature vertical peg board designs that keep your sockets out of the tool box, immediately identifiable, and exactly where you need them. With this wide range of sizes, you can organize your tool chest with ease. *Sockets are not included with the holder.*.
  • SIZES: This set includes 176 posts with one standard and one deep post for each size. 1/4” drive sizes include a metric range of 4mm to 15mm and an SAE range of 1/8” to 5/8”. 3/8” drive sizes include a metric range of 6mm to 20mm and an SAE range of 1/4" to 1". 1/2” drive sizes include a metric range of 10mm to 27mm and an SAE range of 3/8” to 1-1/4”. For a complete list of included posts, please reference this item’s images for a comprehensive table of sizes..
  • DESIGN: These socket organizers make managing sockets simple.
  • each tray’s vertical posts secure sockets and feature size markings for easy identification. With their unique 2-tray designs ....
Check Stock

6PCS Socket Organizer Tray Set, Red SAE & Black Metric Socket Storage Holder, 1/4-Inch, 3/8-Inch & 1/2-Inch Drive Deep and Shadow Socket Holders for Toolboxes

  • Eliminate Toolbox Clutter & Save Time: This complete craftsman socket organizer is designed for eliminating your toolbox cutter and keeping it organized, saving more time. Make it convenient for you to find the dedicated socket instantly.
  • Complete SAE & METRIC Sizes Available: Fit for SAE size from 1/8” to 5/8” (1/4" drive), 1/4” to 1” (3/8" drive), 3/8" to 1-1/4"(1/2" drive). Metric size from 4mm to 15mm (1/4" drive), 6mm to 20mm (3/8" drive), 10mm to 27mm (1/2" drive).
  • Fast To Recognize: Each post marked with clear measurement sizes for instant identification to save your time. Red SAE and black Metric socket tray make it easy to distinguish when they mixed.
  • Safe Storage: Made from durable ABS that can keep your socket from oil and gas. Featuring extended base to hold your socket securely. The perfect addition to keeping your toolbox, workbench and garage clean as well as organized.
  • Available For Both Deep & Shadow – Dual rail design support storing and organizing both deep and shadow sockets at the same time. And the product itself has aircraft holes for easy suspension.
Check Stock

ARES 60058 - 6-Pack Set Metric and SAE Magnetic Socket Organizers -Blue and Red -1/4 in, 3/8 in, 1/2 in Socket Holders -143 Pieces of Standard (Shallow) and Deep Sockets -Organize Your Tool Box

  • METRIC SOCKET ORGANIZERS: This set includes three blue metric magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep metric sockets. These organizers can be used with the following socket sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm..
  • SAE SOCKET ORGANIZERS: This set also includes three red SAE magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep SAE sockets. These organizers can be used with the following socket sizes: 1/8-in, 5/32-in, 3/16-in, 7/32-in, 1/4-in, 9/32-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 9/16-in, 5/8-in, 11/16-in, 3/4-in, 13/16-in, 7/8-in, 15/16-in, 1-in, 1 1/16-in, 1 1/8-in, 1 3/16-in, 1 1/4-in. *Sockets not included with the holders.*.
  • DESIGN CONSIDERATIONS: Each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces. These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can ....
Check Stock

ARES 60057-6-Pack Set Metric and SAE Magnetic Socket Organizers -Black and Red -1/4 in, 3/8 in, 1/2 in Socket Holders -143 Pieces of Standard (Shallow) and Deep Sockets -Organize Your Tool Box

  • METRIC SOCKET ORGANIZERS: This set includes three black metric magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep metric sockets. These organizers can be used with the following socket sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm..
  • SAE SOCKET ORGANIZERS: This set also includes three red SAE magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep SAE sockets. These organizers can be used with the following socket sizes: 1/8-in, 5/32-in, 3/16-in, 7/32-in, 1/4-in, 9/32-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 9/16-in, 5/8-in, 11/16-in, 3/4-in, 13/16-in, 7/8-in, 15/16-in, 1-in, 1 1/16-in, 1 1/8-in, 1 3/16-in, 1 1/4-in. *Sockets not included with the holders.*.
  • DESIGN CONSIDERATIONS: Each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces. These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can....
Check Stock

LLNDEI 3/8”Drive Impact Socket Set,Standard SAE 5/16 to 3/4-Inch Metric Size 8-22mm 95 Piece CR-V Steel Deep&Shallow Kit Adapters Ratchet Handle Screwdriver Bit Set Spark Plug Socket 6 Point

  • ✔METRIC & STANDARD SOCKET SET: LLNDEI 3/8-inch Impact socket set includes both metric and standard sizes and 1/4-inch bits and full complement of extensions and to fit any and all measurements you encounter on the job or home repair!.
  • ✔HEAVY-DUTY 3/8" IMPACT SOCKETS: Each black socket and socket extension in this master kit is constructed with high-impact drop-forged premium chrome vanadium steel. The sturdy and professional chrome vanadium construction allows you to take on any project, large or small..
  • 1x 3/8” Quick Release Ratchet Handle low-profile, 72T.
  • 28-Metric Deep and Shallow Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22mm.
  • 16- SAE Deep and Shallow Sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4”.
  • 1x 3/8” Socket Adapter for power tools..
  • ✔6-POINT HEX DESIGN: The 6-point hex socket design prevents round off on fasteners under high torque exertion from an impact gun or electric wrench output. The included socket set case holds each socket for easy transport and storage..
Check Stock

CRAFTSMAN Deep Socket, Metric, 3/8-Inch Drive, 8mm, 6-Point (CMMT99143)

  • CORROSION RESISTANCE: Deep socket comes with full polish chrome finish.
  • INCREASED TORQUE: 6-point metric socket comes with fastener.
  • QUICK SIZE IDENTIFICATION: Large Markings.
Check Stock

CRAFTSMAN Deep Socket, Metric, 1/2-Inch Drive, 21mm, 12-Point (CMMT44447)

  • CORROSION RESISTANCE: Deep socket comes with full polish chrome finish.
  • QUICK ENGAGEMENT: 12-point box end metric socket comes with fastener.
  • QUICK SIZE IDENTIFICATION: Deep socket comes with large markings.
Check Stock

CRAFTSMAN Deep Socket, Metric, 1/4-Inch Drive, 10mm, 6-Point (CMMT44407)

  • CORROSION RESISTANCE: Deep socket comes with full polish chrome finish.
  • INCREASED TORQUE: 6-point metric socket comes with fastener.
  • QUICK SIZE IDENTIFICATION: Large Markings.
Check Stock