Categories

Best Metric Threaded Rods

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

  • 【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
  • 【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
  • 【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
  • 【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
  • 13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
  • 【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

Raiseek Gun Cleaning Kit Universal Gun Cleaning Kit Shotgun Pistol Rifle Cleaning Kit Gun Cleaning Patches Updated Rods with Case Plastic Jags and Tips

  • ...easily broken brass rods, we improve the material of the rods. It makes your cleaning process more smooth and enjoyable without being interrupted..
  • Universal gun cleaning supplies-3 rods for 22-270 caliber rifles (total combined length 31.4 inch), 3 rods for .30 caliber and up rifles, shotguns and pistols. 13 Pieces threaded bronze bore brushes.
  • The well-organized carrying case measured 15.7x10.2x2.3 inch features with caliber size engraved into slot and easy open sliding buckle. Portable and lightweight. It keeps everything in neat order and marked size for easy findings. .357 .380 and 9mm are essentially the same size. Package includes .357 jag and brushes. You can use .357 jag and brushes to clean .357 .380 and 9mm..
  • Package includes: 13 threaded bronze bore brushes, 1 rifle chamber brush, 9 threaded mops, 11 gun jags（10 plastic 1 brass), 4 patch holders （3 plastic 1 brass), 2 empty bottles, 6 solid iron rods (2 with handles), 3 nylon coated flex cables, 100 cleaning patches, 2 metal gun cleaning picks, 2 brass adapter, 3 plastic muzzle guards, 2 double-ends brushes..
Check Stock

50Pcs Nut Inserts Wire Thread Insert Sleeve Bushing Screw Protective Coil Screw Repair Nut Kit Thread Locking Inserts M10 x 1.5(2D)

  • The wire threaded sleeve is female thread fastener with certain elasticity, which can enhance the connection strength of the thread..
  • It is convenient and quick to use wire thread inserts to convert metric one to one inch threaded holes. The thread size is standard, the thread is clear, and it will be more accurate for thread sliding tooth restoration..
  • Fit the wire screw set in the screw hole of the workpiece such as aluminum alloy to form a high-strength, wear-resistant, high-precision standard internal thread. 304 stainless steel has good corrosion resistance and is not easy to break when repairing thread holes..
  • The screw sleeve can be used to convert between metric and imperial thread holes, which is convenient and fast..
  • When there is a thread processing error or a damaged internal threaded hole is repaired, the threaded hole can be repaired economically and effectively by using the wire thread insert as a repairing method. The repair nut is mainly used in aviation, automobiles, lamps, molds, mechanical equipment and other manufacturing fields..
Check Stock

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

  • Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
  • Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
  • The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
  • Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
  • It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
  • Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
  • Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....
Check Stock

uxcell Wire Bolt Cutters 8 Inch with Comfort Grip

  • Forged manganese steel jaws deliver superior cutting power.
  • Compound cutting action requires less effort.
  • Exceptional cutting performance with minimum effort due to lever action design.
  • Ergonomic plastic coated handles offer greater control and comfort.
  • Industrial quality tool cuts bolts, chains, threaded rods, wires, rivets bolts, threaded rods.
Check Stock

Birchwood Casey 264/6.5Mm Brass Push Jag, Multi, One Size (BC-41353)

  • 24/.243/6mm caliber brass Jag - female threaded.
  • For Use with J. Dewey 8/32 female threaded Cleaning rods, and any Cleaning rods with 8/32 female threads.
Check Stock

GLORYFIRE Universal Gun Cleaning Kit for .22 .357/.38/9mm .40 .45 Caliber Pistol Handgun with Cotton Mop, Bronze Brushes, Brass Jags, Brass Slotted Tips with Empty Bottles

  • ...plastic, you will be surprised at their firmness and durability..
  • 【Included】:33.5 inch wire rope with it own handle for cleaning .17-.270 caliber rifles and pistols , 3 rods are suitable for rifles, shotguns and pistols with 0.30 caliber and above, 3 rods are suitable for 12GA -.270CAL caliber(shotgun rifle), 10 threaded bronze hole brushes, all diameters:✔.17/ 4.39mm/ 5mm/ .20 ✔.22/ .221/ .224/ 5.7mm ✔.243/ .240/ 6.17mm/ 6mm ✔.270/ 6.8mm/ .280 ✔.30/ .300/ 7.62mm/ 7.63mm/ .307/ 7.82mm/ 30-03/ 30-06 ✔.357/ 9mm/9.5mm ✔10mm/ .40/ .416 ✔.45/ .455 ✔12GA ✔20GA..
  • 【Package Details】: 10 threaded bronze hole brushes, 4 threaded cotton mops, 7 plastic jags, 2 plastic slotted patch loops, 2 empty bottles, 3 0.2''solid brass rods (1 with handle), 3 0.24''solid brass rods (1 with handle), 1 33.5 inch wire rope, 50 cleaning patch, 1 metal gun cleaning pick,3 double head brushes..
  • 【Worry-free Purchase】: Some accessories are consumables, so we have prepared a variety of accessories in our California warehouse. If you encounter any problems during use, please contact us and we will serve you wholeheartedly..
Check Stock

Rectangular Retort Base & Rod Set - 11\x6\ Base, 35.5\ Rod - Heavy Duty Cast Iron - 12mm Diameter Rod - Eisco Labs

  • HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of chemical-resistant cast iron with a blue coating and a 90cm rod made of stainless steel.
  • STABILITY || The 11" long by 6" wide base weighs 8lbs, providing superb stability for experiments & setups - The included rod measures 35.5" tall and is 12mm in diameter.
  • TAPPED HOLE AND THREADED ROD || Base features a tapped hole, which fits the included rod, and can accommodate other rods with a 10mm x 1.5mm metric thread.
  • GREAT FOR CLASSROOM & HOME LABORATORIES || The durable and sturdy construction of this set makes it an excellent choice for science classrooms, household laboratories & basic professional laboratory setups.
  • MANUFACTURED BY EISCO LABS || Eisco Labs proudly manufactures its own products using state-of-the-art equipment, and following the highest standards of quality control. Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind.
Check Stock

Ivilon Bay Window Curtain Rod Corner Connector - for Rods of 5/8 to 1-1/8 Inch - Warm Gold

  • Includes 2 elbow corner connectors for bay window curtain rods or poles..
  • Neat connection design that can be adjusted from 90 to 180 degrees..
  • Decorative and made of premium zinc metal with a durable finish for long lasting..
  • No extra tools are required. Includes threaded screws of 1/4-20 inch. Compatible with all rods with a threaded end of 1/4"..
  • Minimalist ball design of 1.5-inch diameter fits rods from 0.5 up to 1.125 inch..
Check Stock

SAE and Metric Bolt Gauges Check-a-Thread Nut Fastener Size Tool

  • ✿America SAE type measuring range: 4 - 84, Metric & America SAE Type & British Metric: 0.25 - 6.0mm, Imperial: 4G - 62G US: 8, 10, 11, 14, 19, 28.
  • ✿Made of stainless steel, the toothed edges are sharply defined and the numbers are stamped and easy to read, ensure the accuracy of measurement.
  • ✿Thread pitch gauge is used to check whether the dimensions of molds, machines and mechanical threads are correct. Center gauges are used for grinding and positioning threaded cutting tools on lathes.
  • ✿Including: 3 x Center Gauge + 1Pc America SAE Type Gauge + 1Pc Metric and Imperial Gauge.
  • ✿Use for check the thread size, can be used for measuring the metric, imperial and American SAE type screw thread.
Check Stock

Vmaisi Baby Gate Wall Protector - 4 Pack Bundle with Threaded Spindle Rods Extra Long Baby Gate Accessory Replacement Screws Parts - Black

  • Vmaisi Baby Gate Wall Protector - 4 Pack Bundle with Threaded Spindle Rods Extra Long baby Gate Accessory Replacement Screws Parts - Black.
  • 【MULTI-APPLICATION】 Baby Gate Parts Replacement Fit for all pressure Gates, including baby gates, pet gates, Walk through Extra Wide, Tall Safety Children Proof Gates With Door, Work with threaded Spindle Rods together.
  • 【STABLE AND NON-SLIP】Baby Gate Wall Guard Make your Baby gates More Stable and do not failing over. Protection: Protect your walls, no Holes, fit with your baby gates, pet gates, dog gates.
  • 【WALL DAMAGE-FREE】Baby Gate Wall Cups Protector: Wall protection Guard pads is distributed over a larger area. They designed to protect your walls, doors and stairways when baby or pet gates are mounted. Best replacement parts.
  • Baby Gate Extender bundle 2 items: Black 4 Pack Baby Gate Wall Protector + 4 Pack Threaded Spindle Rods Replacement Parts.
Check Stock