Categories

Best Metric Titanium Bolts

Neiko 02460A 3/4\ Drive Deep Impact Socket Set, 8 Piece Jumbo Assortment | Metric Sizes (26 to 38 mm) | Chrome Vanadium Steel

  • HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
  • LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point Metric sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
  • SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each Metric socket will torque the most stubborn fasteners..
  • HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched Metric size markings allow easy reading in low light settings and promote efficiency on the job..
  • INCLUDES COMMON METRIC SIZES: Includes eight common Metric socket sizes (26, 27, 29, 30, 32, 35, 36, 38 mm) with blow-mold storage case included..
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

M12-1.75 x 30mm Hex Head Bolts Hexagon Screws, Class 12.9 Alloy Steel Black Oxide Finish, Full Thread, 10 PCS

  • WIDE APPLICATION : The hex bolts can be used for different kinds of furniture such as cribs, cupboards, wardrobes, bunk beds, etc. It also good for office appliance, communication equipment, ship assembly and other machinery industry..
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • ...plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA

  • Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
  • Ideal for restoring the stripped threads on old, rusty nuts and bolts.
  • Hex shape makes taps and dies easy to turn with any socket or wrench.
  • Can be used on national coarse, national fine and metric nuts and bolts.
  • Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.
Check Stock

4 Sets Furniture Legs Mounting Plates with Hanger Bolts Screws Great for Furniture Leg,Chair, Sofa,Cabinet,Couche, Set of 4

  • Pack list: 4 Pcs M8 hanger bolts, 12 Pcs screw. Note: Our products belong to the metric M8 hanger bolts. If you find that you can’t screw the hanger bolts, the accessories may not match (the imperial system does not match the metric system). You can check it carefully before purchasing. If there is a purchase error, please contact us in time. You can get a refund for free..
  • Widdly use:The furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Easy to Install: Sofa leg mounting plate sets protect the furniture legs effectively, make your furniture more durable..
  • Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place..
  • Complete accessories: No need to purchase hanger bolts separately. You can follow the plan to install immediately,When you install product and found any questions,please contact us in time,Our after-saler team will support you immediately..
Check Stock

Stainlesstown Nut Bolt Thread Gauge (Red)

  • Measures diameter, thread pitch & length of nuts, bolts & screws.
  • Measures fractional bolts from size #4 to 1" up to 7" long.
  • Measures metric bolts & screws from size 3mm to 22mm.
  • Made of very durable 1/4" thick hard plastic.
  • 1/4" thick x 8-3/4" Long x 3-3/8 Wide Color: Red.
Check Stock

Stainlesstown Nut Bolt Thread Gauge (Blue)

  • Measures diameter, thread pitch & length of nuts, bolts & screws.
  • Measures fractional bolts from size #4 to 1" up to 7" long.
  • Measures metric bolts & screws from size 3mm to 22mm.
  • Made of very durable 1/4" thick hard plastic.
Check Stock

DURATECH Universal Wrench Set, Adjustable Wrench Set, SAE & Metric, 8-inch&10-inch, 44 sizes in 2 Piece, Drop Forged, ANSI standard

  • Drop forged, heat treated, double thread, mirror polish, and electroplating. Exceeds ANSI specifications..
  • Different sizes meet your different needs. The 8-inch universal wrench fits both standard 3/16 '' to 5/8 '' and metric 5mm to 16mm nuts and bolts.
  • 10-inch universal wrench fits both standard 11/16 '' to 1-1/16 '' and metric 17mm to 27mm nuts and bolts, adjust the size by moving the middle push block..
  • The working torque reaches 1.2 times of the American standard of the double box end wrench, and the destruction torque reaches 1.4 times of the American standard of the double box end wrench..
  • Specialized wrench design allows work on multiple types of fasteners including 6-point, 12-point, square, E-Torx, triangle, and most rounded out fasteners..
  • This wrench can do both American standard and Metric. With this total wrench you can do so many thing without the need of changing wrenches of different sizes since this multi facet..
  • Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Thread Gauge Combo-Mini

  • Set includes both Inch and Metric identifiers. Thread sizes are permanently laser etched on each gauge..
  • All sizes are steel with a clear zinc finish and each gauge identifies both bolts and nuts..
  • Takes the guess work out of thread size and pitch on nuts, bolts , screws, threaded holes and many other threaded items..
  • Eliminates costly and time consuming repairs..
  • Great for identifying and sorting nuts and bolts in fastener cribs, fastener bins at home or at your facility..
Check Stock

Nut and Bolt Thread Checker (Inch & Metric) Nut and Bolt Size Gauge- 14 Inch & 12 Metric New Individually Assembled Thread Gauge Suitable for Detecting Fixed Bolts or Threaded Holes in Enclosed Areas

  • ...ore] Just screw the nut or bolt into the screw thread gauge, it takes you a few seconds to check the size. You do not need to drive forth and back to and from the hardware and auto parts stores for check any more. Also, this nut and bolt gauge is especially well suitable for the distinguish between similar inch and metric threads..
  • [Zinc Plated for Inch Size] Includes 14 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20..
  • [Black Oxide for Metric Size] Includes 12 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75. (The thread sizes are permanently stamped onto each 26 gauges, inch in black, metric in white)..
  • [Get Your Stuff Well-Organized] This nuts bolts organizer has 26 male/female gauges, all are the most used sizes for everyday use, which can help you well and fast sort out your assorted nuts and bolts and get them well organized and neater in your compartment box from misplace and loss. A great little toolbox if you use fasteners a lot or have a box/drawer/stake/garage full of random nuts and bolts..
Check Stock

Crib Screws Bolts Replacement Hardware Parts Kit Metric M6 Allen Head Crib Bolts Barrel Nuts Compatible with Graco Solano Lauren Benton Hadley Asheville Ashleigh Stanton Cribs

  • Allen Head metric M6 Replacement crib screws for your missing baby crib bolts..
  • This crib screws hardware replacement kit contains 3x 16mm bolts, 3x 20mm bolts, 3x 30mm bolts, 3x 35mm bolts, 3x 40mm bolts, 3x 50mm bolts, 3x 55mm bolts, 3x 60mm bolts, 3x 65mm bolts, 3x 75mm bolts, 3x 85mm bolts, 20x barrel nuts (D x L: 9.8mm x 12.5mm, 9.8mm x 14.5mm), 4x joint connector nuts..
  • This baby bed crib screws hardware replacement kit is compatible with Graco Solano Lauren Benton Hadley Asheville Ashleigh Stanton Convertible Cribs..
  • Crib bolts and nuts are made of carbon steel, they are solid replacements parts for your crib..
  • There are many types of cribs and there are many different lengths and sizes of bolts to assemble a crib, if you do not know whether this kit will work for your crib, reach out to us for support..
Check Stock

License Plate Hardware Kit 400 Screw Variety Pack, Stainless Steel Screws, Nylon Screw Inserts, Black Screw Covers for Fastening License Plates, Frames and Covers EZ458

  • INCLUDES: 50 Thumb Screws 50 Pan Heads 50 Nylon Inserts 50 Hex Head Bolts 50 Hex Slot Head Screws 50 Large Metric Bolts 50 Black Pan Heads 50 Metric Screw Pan.
  • New and Improved Heavy Duty Design - Don't settle for Cheap Imitations -Buy from the Industry Leader ✔️ Quality Guaranteed.
  • EZ Line Product with Over 60 years serving the Auto Dealer Supplies Community..
  • 100% MONEY-BACK GUARANTEE - This fastener kit is backed by our World Class 100% Money-Back Guarantee that you are fully satisfied with your product or receive your money back. All parts in this kit are guaranteed to work and last the lifetime of your vehicle..
  • Screws to fit the front license plate frame as well as the back plate screws. Bolts, screws, and thumb screws to fit your license plate fastener needs. License plate cover screw fasteners with a quality promise we stand behind.
Check Stock