uxcell BWL100 100 mm Pull Rod Linear Position Displacement Sensor for Printer

  • Shipping list: AC 220V vibration sensor delay module, with ultra-high sensitivity vibration sensor..
  • AC 220V power supply ultra-high sensitivity vibration delay module plus relay module plus delay three-in-one module, vibration switch module Alarm trigger, with 1 vibration sensor. Relay does not have B1 normally closed end..
  • corridor delay switch, delay energy-saving products.
  • Supply voltage: AC 220V power supply, Current: greater than 100mA.
Check Stock

KeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • 【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • 【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • 【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
  • 【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • 【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

7-80V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • ①【Wide Voltage】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • ②【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • ③【30A Fuse】:The set is equipped with a 30A insurance. Protection of your Motor and Motor Speed Controller. And is equipped with a spare insurance, which can be quickly replaced and repaired..
  • ④【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • ⑤【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

TOTAMEND Solar Controllers | MPPT Solar Charge Controller 30A 40A 50A 60A Off Grid LCD Screen Verison V118 V119 WiFi

  • ✔ 48v battery cell solar m72 ural 5cm fan 9v 2a power adapter charger 3s 40a bms panel system Application Charger Controller,Solar System Controller,Voltage Working Station Model Number S3-30A S3-40A S3-50A S3-60A Plus Maximum Current 30A 40A 45.
  • ✔ 12v 5a power supply Wholesale solar toy mppt usb 24v psu 48v battery From MakeSkyBlue Case Material Aluminum Battery Type Vented Sealed Gel NiCd LiFePO4 Lithium Cooling way Fan.
  • ✔ Wholesale cell solar m72 ural 12v battery lithium Price power supply for lcd tv display unit panel charg station knife s30v Humidity 5% to 95% Relative Operating Temperature -20 | +55 Storage -40 +75 Dimension 215x115x50.
  • ✔ Solar charger lithium Price panel 12v robot battery pack 3s 40a bms Promotion system 5a power supply 30a esc 20a Net Weight 1.1 Warranty One year Unit Type piece Package 1.3kg (2.87lb.).
  • ✔ Boost power Promotion sun tracker 12v 10a supply 18650 Package Size 25cm x 12cm 4cm (9.84in 4.72in 1.57in) 100% SATISFACTION GUARANTEED for your Money Back – No Questions Asked! Click ‘ADD TO CART’ and ‘BUY NOW’!.
Check Stock

MFJ-962D MFJ962D MFJ-962 Original MFJ Enterprises 1.8-30 MHz Versa Tuner III AirCore Roller Inductor Antenna Tuner - Handles 1500 Watts PEP SSB Amplifier Input Power - Covers Mars & WARC Bands

  • The compact MFJ-962D handles 1500 Watts PEP SSB amplifier input power (800 Watts PEP SSB amplifier output power)..
  • AirCore Roller Inductor, new aluminum-skirted knob set including a weighted deluxe spinner knob, ultra compact size (10.75 x 4 x 10.875 inches) and....
  • Two transmitting tuning capacitors and MFJ's exclusive AirCore roller inductor gives you precise control to get your SWR down to an absolute minimum..
  • You get an extremely wide matching range from 1.8 to 30 MHz continuously including MARS and WARC bands.MFJ's AirCore roller inductor has an air core....
  • MFJ's lighted peak and average reading Cross-Needle SWR/Wattmeter makes tuning quick and easy. At one glance you can read SWR, forward and reflected....
Check Stock

UpBright Car 12V DC Adapter Replacement for MFJ MFJ-941E MFJ-948 MFJ-949B MFJ-949C MFJ-949D MFJ-949E MFJ-986 MFJ-962D MFJ-962 MFJ-969 MFJ-989 MFJ-989C MFJ-989D Deluxe Versa Tuner II 12 Volts Auto PSU

  • Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright NEW Car 12V DC Adapter Replacement For MFJ MFJ-941E MFJ-948 MFJ-949B MFJ-949C MFJ-949D MFJ-949E MFJ-986 MFJ-962D MFJ-962 MFJ-969 MFJ-989....
Check Stock

UpBright 12V AC/DC Adapter Replacement for MFJ MFJ-941E MFJ-948 MFJ-949B MFJ-949C MFJ-949D MFJ-949E MFJ-986 MFJ-962D MFJ-962 MFJ-969 MFJ-989 MFJ-989C MFJ-989D Deluxe Versa Tuner II 12VDC Power Cord

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
  • UpBright NEW Global 12V AC / DC Adapter Replacement For MFJ MFJ-941E MFJ-948 MFJ-949B MFJ-949C MFJ-949D MFJ-949E MFJ-986 MFJ-962D MFJ-962 MFJ-969....
Check Stock

944 / 944 Turbo Shirt

  • Cross Needle and Digital SWR/WATT Meters : Lighted Cross-Needle and digital meters lets you accurately read SWR, forward and reflected power at a....
  • Backlit LCD Display : An easy-to-read backlit LCD displays SWR, forward/reflected power, frequency, antenna 1/2, L/C tuner values, on/off indicators....
  • Remote Control Port : Plug in the MFJ-993RC remote control and put your tuner at your antenna or elsewhere and control it remotely. The MFJ-993....
  • Tune Any Antenna : You can tune any antenna — dipoles, verticals, beams, phased arrays, inverted vees, quads, random wires, mobile antennas, compact....
Check Stock

SnowyFox RV Power Adapter 15A Male to 30A Female 18 Inches Heavy Duty Cord with Twist Lock, LED Indicator

  • Fast Conversion Power -The SnowyFox 15A male to 30A female RV power cord adapter allows you to quickly convert the power of the camping ground to suit the 30A power supply of the RV. The maximum load is 125V/3750W, which is suitable for most RVs.
  • LED Indicator Light - With LED indicator light, it will light up after power-on, remind you that it is charging.
  • Firmer Installation - It adopts the twist-lock design. After inserting into the socket, it can be locked by the twist and fixed on the RV.
  • Better Conductivity - 100% pure copper wire, combined with PVC shell, to ensure the best electrical conductivity, wear-resistant and waterproof, more durable.
  • 18 inches Perfect Length - Compared to other RV power cords adapter, the Snowy Fox RV power cord adapter is up to 18" long enough for the journey.
Check Stock

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

RVGUARD 30 Amp to 110 Volt RV Adapter Cord 12 Inch, NEMA 5-15P to NEMA TT-30R Electrical Power Adapter with LED Power Indicator, Green

  • Wide Use: 15A male to 30A female adapter allows you to simply convert the house power, quickly supply power for low power electrical appliance..
  • Electrical Rating: 15A (NEMA 5-15P ) male to 30A (NEMA TT-30R) female adapter with LED power indicator. Rated for 125V and 1875W, constructed with 10/3 gauge wires..
  • Superior Durability: Molded and made of 100% pure copper wiring coated with a heavy duty flame retardant, UV-resistant polyvinyl plastic sleeve that serves as protection from outdoor elements, wear and tear..
  • Disconnect Handle: Disconnect handle for easier plugging in and unplugging without damaging the cable..
  • Power Indicating: Power indicator light visually informs the user when the cord is connected to the power source..
Check Stock

APEXSPORTS RV Generator Marine Power Electrical Adapter, Camper Plug Adapter, Heavy Duty 30A Generator Adapter L5-30P Male to 50A SS2-50R Female Connector with Locking Ring

  • [ 30A GENERATOR ADAPTER] Marine Shore Power Adapter is equipped with a 30A L5-30P male plug that allows you to plug into a 50A SS2-50R female connector to supply the power that is needed for your boat..
  • [ STABLE CONVERSION ] Generator for 3-prong 30A L5-30P male plug to 50A SS2-50R twist lock female connector with locking ring. Quickly convert power for your boat when traveling to different ports..
  • [ GREAT CONDUCTIVITY ] The adapter is built with 100% COPPER wire conductor, making it good conductivity and high-temperature resistance that prevents it from short circuit and overheating..
  • [ THOUGHTFUL DESIGN ] The adapter is designed with grooves to hold tightly for a non-slip grip, weatherproof, and corrosion-resistant..
  • [ USE AS IT IS ] Straight-style adapter to be used in place of dogbone adapter cord, easy to use compact design. One-piece unbreakable PVC housing, no assembly required..
Check Stock

MFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock