Categories

Best Mic Stand Thread Size

8 Pieces Mic Stand Adapter Mic Thread Adapter Set 5/8 Female to 3/8 Male and 3/8 Female to 5/8 Male Screw Adapter Thread for Microphone Stand Mount to Camera Tripod Adapter

  • Robust and beautiful: made from quality aluminum alloy for extended durability, the mic stand thread adapters are anti-rust, light weight and easy to carry, ensure a long service life and reliable daily use.
  • You will get: mic stand adapters, including 4 pieces 5/8 female to 3/8 male and 4 pieces 3/8 female to 5/8 male screw adapter threads.
  • It's beneficial to have a strong connection for your mic, then you don't have to worry about the thread breaking off and your mic falling off.
  • Non-slip design: knurled surface provides nice grip for easy installation and removal.
  • Complete and deep thread without burrs, uniform force and not easy to slip, convenient to install, stable and tight.
  • Nice accessories: if you have some sort of mic stand or boom arm that has a small screw but your microphone has a big screw, this adapter set is available for you.
  • Conversion of microphone holders and accessories from 5/8 inch threads to 3/8 inch or 3/8 inch male to 5/8 inch female.
  • Widely to use: 3/8 inch male to 5/8 inch female mic screw adapter work well with standard mic stands and mic clips/microphones with European 3/8 inch threaded inserts.
  • And also studs for mounting cameras, webcams, filming lights, recorders, action cameras, tripod adapters and other photographic acce....
Check Stock

Mic Stand Extension Tube 4 Pieces 5/8 Inch Microphone Extension Pipe Aluminium Alloy Stand Extenders Screw Boom Tubes Microphone Extension Rod with 2 Metal Adapters for Desk Stand Arm Stand, Black

  • ... together to extend the length of your microphone arm or the height of your mic stand, bringing your microphone close to you and your instruments, thus you can get a better recording effect.
  • Proper Size to Extend Mounts: each mic stand extension tube measures approx. 3.35 inches in total length, with a 5/8 inch male thread and a 5/8 inch female thread, and the adapters come with 5/8 inch male threads and 3/8 inch female thread, suitable for you to attach to your stands and mounts.
  • Work with Most Stands: the microphone extension pole can fit most microphone stands, boom arms and most microphones well, allowing you to record your performance better, and they can also work well with your devices with the same screw, bringing you much convenience.
  • Serve A Long Time: our mic stand extenders and metal adapters are made of quality aluminium alloy, sturdy and reliable, not easy to break or deform, adopted sandblasting on the surface, painted in classic black, delicate in appearance and comfortable to touch, offering you a pleasant experience.
  • Easy to Install: you only need to screw the extension tube onto the cantilever or microphone holder, if you need a metal adapter to accommodate more recording equipment, just screw it directly onto the boom or microphone ho....
Check Stock

Moukey Desk Mic Stand & 10 FT XLR Mic Cable 6 Pack

  • 【MIC STAND】Unique microphone clip: Microphone clip with anti-slip and fixed function for all handheld transmitters, such as Sm57 Sm58 Sm86 Sm87, suitable for dynamic microphone, wired microphone, some wireless microphone.The microphone clip can be adjusted 180 degrees, and the angle can be set as needed..
  • 【MIC STAND】The tripod is more rugged and stable: the aluminum tripod legs add durability and are more sturdy. Don't worry about slipping when you have a sponge pad on your feet, you can focus on recording..
  • 【MIC STAND】5/8" to 3/8" Microphone Thread Adapter: Internal thread of the microphone clip and standard 3/8" female to 5/8" male adapter. With internal threads, this arm bracket is compatible with Blue Yeti, Snowball and other microphones. (The adapter is attached to the microphone clip and should be unscrewed when conversion is required).
  • 【MIC STAND】Adjust the height of the table: the nut can be easily adjusted to height, adjustable height 18-26.5 cm / 7.09-10.43 inches. It can be adjusted according to your angle.（Note : Max load: Approx 2.2 lbs ).
  • 【MIC CABLE】High-quality metal shell, wear-resistant and durable. Suitable for home audio, karaoke audio, professional stage audio and other equipmen.
Check Stock

Metal Slotted Mic Screw Adapter 3/8 Female to 5/8 Male 2 Pcs for Mic Stand such as Blue Yeti, Yeti Pro, Blue Yeti X, Blue Snowball, by Rigych (Black)

  • Premium Quality - This screw thread adapter is made of metal. Ensures a long life and reliable daily use, anti-rust, anti-corrosion, sturdy and durable. Great replacement for the cheap plastic adapter. Keep your camera or microphone in a sturdy position..
  • Anti-skid Knurled Surface - Our Mic Stand Adapter has a complete and deep thread without burrs, excellent grip make it stable and firm, easy to install and remove. Precision-manufactured camera stand screw adapter, connect the camera to the tripod or mic stand..
  • High Applicability - This 3/8" female to 5/8" male thread adapter is designed for most mic stand on the market, such as Blue Yeti, Yeti Pro, Blue Yeti X, Blue Snowball. They can connect your camera, LCD monitor and microphone stand..
  • High Cost-Effective - Don't need to spend more money to return the microphone stand and re-order another stand. Convert the microphone stand accessories from 3/8" threads to 5/8" threads. If you have some kind of microphone stand or mid arm stand with small screws, but your microphone has a large screw, then this is the right adapter for you..
  • 100% Quality Assurance - Satisfying every customer is our goal. We believe that you will receive our screw thread adapter and be satisfied with it. You don't have to worr....
Check Stock

SUNMON Quadcast Mic Stand with Boom Arm Clamps For HyperX Quadcast Microphone

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Assembly clip】 - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
  • 【Wide range of application】 - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
  • 【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
  • 【Refused to break】 - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..
Check Stock

Mic Stand Adapter Set,8 Pcs Mic Thread Adapters-5/8 Female to 3/8 Male and 3/8 Female to 5/8 Male, 5/8 Female to 1/4 Male and 1/4 Female to 5/8 Male-Screw Adapter for Microphone Stand Mic Boom Arm

  • 【High Quality】 Made of aluminum alloy,well-coated with frosted black paint,these microphone stand adapters are anti-corrosion,anti-rusted,durable and reliable,sturdy and firm,not easy to break or fade,offering you a long service life..
  • 【Stable Mounting】 Adopted the non-slip and knurled surface, deep threaded without burr design, each mic stand screw adapter offers you firm grips,mounting your devices more stable! No worry of falling or breaking.And the clear thread inside enables you to screw easily and smoothly..
  • 【Wide Applications】These mic threaded adapters of 4 types are widely used in most types of mic stands, mic clips, camera stands, recorder stands and other same thread accessories,enable you to gain more rig combination possibility and freedom..
  • 【Easy To Install】 A slot on the bottom of 5/8 male to 3/8 female and 5/8 male to 1/4 female screw adapter is designed for microphone stand, you can easily install and remove them. All mic stand adapters are well-packed in a small bag, very lightweight and easy to carry..
Check Stock

Studio Recording Microphone Isolation Shield with Heavy Duty Tripod stand, Pop Filter.High Density Absorbent Foam to Filter Vocal Suitable for Blue Yeti and Any Condenser Microphones

  • 【Package Contains】Studio mic stand 1*5-panel microphone shield stand,1*Heavy duty stand,1*Metal thread adapters,Pop filter*1, 1*3/8-Inch male to 5/8-Inch mic screw adapter. Easy to mount on microphone stand. The height of the isolation shield can be adjusted freely. Isolation shield tripod design for mic stand, the maximum length can reach 83.8 inches / 213 cm, minimum length is 44.5 inches / 113 cm. Duty stand more stable for studio recording. (Microphone and shock mount is not Included)..
  • 【Designed for Recording】Microphone shield stand made of absorbing cotton insulation, the inside of this recording studio equipment reduces echo, while the outer layer can filter unwanted noise. The multi-layer soundproof system can effectively reduce the noise on the back and side, reduce the interference of sound reflection on recording, improve the clarity of the microphone recording mic stand for blue yeti. Record in studio. Microphone isolation shield give you unexpected results..
  • 【Easy to Install】Screw the microphone isolation shield directly into the top of the stand. The stand comes with standard 5/8-inch thread mount. And you can install the isolation shield to any height you want. The microphone isolation shield is more rugged and scratch-resist....
Check Stock

Moukey Desk Mic Stand Universal, Adjustable Desktop Mic Stand Portable Foldable, Tripod Mic Table Stand with Small Plastic, Microphone Stand for Sm57 Sm58 Sm86 Sm87 Blue YetiBlue Snowball iCE

  • ...he microphone clip can be adjusted 180 degrees, and the angle can be set as needed..
  • Sturdy and Stable Tripod: The aluminum tripod legs for the desktop mic stand add durability and are more sturdy. Don't worry about slipping when you have a sponge pad on your feet, you can focus on recording..
  • 5/8" to 3/8" Microphone Thread Adapter: Internal thread of the microphone clip and standard 3/8" female to 5/8" male adapter. With internal threads, this mic stand is compatible with Blue Yeti, Snowball, and other microphones. (The adapter is attached to the microphone clip and should be unscrewed when conversion is required).
  • Adjustable Height: This desk mic stand can be easily adjusted to height, adjustable height of 18-26.5 cm / 7.09-10.43 inches. It can be adjusted according to your angle. (Note : Max load: Approx 2.2 lbs).
  • Easy to Carry: The Moukey mic stand is easy to fold when not in use. Easy to store, perfect for showing or traveling on the go. Suitable for placing microphones on the desktop for meetings, lectures, presentations, podcasts, screencasts, or video chats..
Check Stock

Microphone Stand - Universal Mic Mount with Heavy Compact Base, Height Adjustable (2.8’ - 5’ ft.) - PMKS5

  • HEIGHT ADJUSTABLE: Pyle compact base microphone stand smoothly quick and easy, raise or lower height adjustment from 33.5" inch to 60.24'' inches high. Also, Pyle used USA standard 5/8 x 27 external thread size.
  • RELIABLE STURDY BASE: It is solid die-cast and base for about 235mm in diameter. Pyle mic stand will provide stability and precise balance to avoid it from falling. And 9.92 lbs. counterweight for a stable microphone placement.
  • CONVENIENT DESIGN: This is an ideal mic stand for the musician that’s always on the go. It’s ultra-light pack up with sleek black finish is ultra-light for easy transport. It is also built compactly to be both durable for long term use.
  • STUDIO AND CONCERT USE: Perfect mic holder positioning and optimal pickup for the studio and concert performances. The Pyle PMKS5 is a class at its own.
Check Stock

Rockville Podcast Podcasting Recording Microphone Boom+Shockmount+Pop Filter

  • ...y-duty weighted steel round base. Adjustable Height. Boom arm for precise positioning.
  • Rubber pad for extreme stability prevents sliding. Low profile design. Scratch-resistant powder coated finish. Specifications: Boom length: 13.8" (40cm). Height adjustment: 10.63" to 15.75" (27cm 40cm). Base Diameter: 6.3" (16cm). Thread Size: 3/8". Weight: 4.85 lbs (2.2 kgs). RockvilIe RockPop Double Screen Recording Microphone Pop Filter with Metal Gooseneck Clamp. Prevents pops when recording vocals. Adjustable clamp fixes securely to any mic stand. Gooseneck for precise positioning.
  • The first screen blocks air blasts. The gap in between the 2 screens disperses any remaining air pressure. By the time it passes the second screen, the blast is easily contained. Adjustable Gooseneck: The metal gooseneck holder fully supports the filter's weight and keeps it in place. You can adjust the angle and distance between the wind screen and the microphone.
  • Universal Compatibility: Adjustable and rotating clamp with scratch-proof gripper secures to any tubular mounting booms or mic stands with a maximum diameter of 1.6 inches. Swivel mount for easy installation. Pop Filter Diameter: 5.9 inches. Gooseneck Length: 14.1 inches. Net Weight: 0.44 Lbs. Features of R-Shock BLACK: Rock....
Check Stock

Monoprice 110272 Small Flexible Tripod, Black

  • ★ Updated May 2021 with new adapter threads. Stand is now compatible with ALL MODELS of Microphone Isolation Shields - clamp style or thread loading. Can also be used as a microphone or speaker stand..
  • Includes 3/8" and 5/8" mic thread adapters to cap the end.
  • Heavy-duty studio tripod with threading adaptors making this a multi-functional studio stand for microphones, isolation shields or speakers. Carries up to 7 lbs. for top thread-loaded microphone or isolation shield.
  • Adjustable height from 41" to 71.5" inches. Suitable for children and adults over 6ft tall..
  • Compatible with the following brands of Microphone Isolation Shields: Moukey, Tonor Shield, Aokeo, Neewer, Aston, AGPTEK, Monoprice, LyxPro and AxcessAbles.
Check Stock

SUNMON Quadcast Mic Stand with Pop Filter For HyperX Quadcast Microphone

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX Quadcast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Professional Windscreen】- Foam pop filter designed for Blue Snowball Ice microphone with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality..
  • 【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
  • 【3 Layer Desgin 】– Pop filter is made from double layered steel meshs in outside and one layered foam windscreen in middle. It optimizes air current diffusion for maximum audio transparency that eliminates plosives far more effectively than fabric filters..
  • 【Adjustable Gooseneck】- The steel metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs for yours lovely voice..
Check Stock

Microphone Stand, Detachable Weighted Round Base Mic Floor Stand with Boom Arm Pop Filter Mic Clips 3/8\ to 5/8\ Adapter Cable Ties, Height Adjustable from 48\ to 63\ for Snowball Blue Yeti

  • ...able microphone placement, this mic stand will provide stability and precise balance to avoid it from falling..
  • 【Adjustable Design】Raise or lower height adjustment from 48" inch to 63'' inches. Telescopicboom arm pole length can be adjusted from 17" to 33" and 175°rotation. Also, the stand used USA standard 3/8 thread screw head, and coming with a 3/8" to 5/8" adapter for mounting most microphone and shock mount..
  • 【Reliable Microphone Holder】Made of premium steel, the upgraded steel pipe is thickened to 2mm, compared to only 1mm thick of other stands on the market, sturdy enough to support your microphones, not easy to become deformed. Weighted steel round base is stable to stabilize most mics indoors or outdoors..
  • 【Convenient Detachable Design】 This microphone stand with boom arm can be disassembled into three parts and easy carrying and assembly. It is also built compactly to be both durable for long term use. Perfect mic holder for stage, studio, road show, concert, outdoor performances and more..
Check Stock