Categories

Best Micro Chisels

Taytools Genuine Horse Butt Leather Strop 12 inches x 3 inches x 1/8 inch Thick with 1.2 Ounce Bar Green Chromium Oxide 0.5 Micron Micro Fine Polishing Compound

  • This is a set containing on 12 inch x 3 inch X 1/8 inch horse butt leather strop and one 1.2 ounce bar of green chromium oxide micro fine polishing compound.
  • Used together this horse butt strop and chromium oxide compound will put a scary, wicked sharp edge on razors, knives, carving chisels and woodworking tools.
  • Horse butt leather is some of the hardest, toughest and most durable leather you can buy. The natural silicates found in bare leather are what abrade and polish steel. Horse butt has a higher silicate concentration than most any other leather making it the perfect stropping material..
  • Micro Fine Chromium Oxide polishing compound is specially designed for use with leather strops to put a scary sharp, polished, mirror-edge on knives, carving chisels and woodworking tools. The waxy consistency allows it to adhere well to any substrate without powdering. Simply rub the bar evenly on the surface like a crayon. A little goes a very long way, so this small bar will last for a very long time..
  • This strop has two distinct sides, a smooth hair side and a slightly rougher flesh side. The rough flesh side is perfect for holding polishing compound and useful for initial stropping. The smooth hair side is best used plain for the final strop..
Check Stock

Dewalt DT6946 Chisel Wide, 19 mm Hex

  • Micro-processor controlled heat treatment for consistently tough.
Check Stock

TcnoMreol Concrete SDS Chisel Bits Set, 8pcs Chrome Steel SDS Plus Pointed Flat Wide Scaling Chisels Gouge Scraping Chisels Angled Bent Removal Chisel for Concrete, Brick , Masonry Max to 7/10*11*3In

  • ...shot peening treatment, increasing toughness and hardness, and reducing wear to a greatly. And the handle designed by optimal geometry, high occlusion, matched perfectly, easy for installation, also, can reduce vibration when working, provide high working efficiency and long use life..
  • Size: Come with 8pcs different chisels, 2pcs Point chisels, 11/20"*5-9/10"(14*150mm), 11/20"*9-4/5"(14*250mm), 2pcs Flat chisels, 11/20"*5-9/10"(14*150mm), 11/20"*9-4/5"(14*250mm), 2pcs Scraping chisels, 11/20"*5-9/10*1-14/25"(14*250*40mm), 11/20"*9-4/5"*2"(14*250*50mm), 1pcs Hollow Grooving gouge chisels, 11/20"*9-4/5"(14*250mm), 1pcs Scaling chisels, 7/10*11*3"(17*280*75mm). These chisels can meet all kinds of your need.
  • Widely application: With round shank, these chisels applicable to all SDS-plus hammer, and widely for the removal and drilling of concrete, brick, masonry and granite, and Hollow grooving gouge chisels special used for removal of walls, tiles and cement, also for wire groove..
  • Warranty: We promise provide you good service, if there is any problems, you can contact us directly, we will solve your problems timely and refund and new replacement is available.
Check Stock

KINJOEK 6 PCS Chisel Set, SDS Rotary Hammer Drill Bit Set with Carrying Case, Pointed Chisels Flat Chisels Wide Chisels

  • SUPERIOR MATERIAL - Different from ordinary carbon steel used in regular hammer drill bits, this impact drill bit set is made of superior 40cr steel, which effectively improves the wear resistance and durability..
  • HEAT TREATMENT PROCESS - This SDS hammer drill bit set adopts heat treatment process and integral stamping technology to improves the toughness and hardness, and strengthen the impact force..
  • COMPLETE SET - You will get 2 pointed chisels, flat chisels, and wide chisels. These SDS plus chisels adopt the universal round handle and groove design to prevent chisel from falling and slipping effectively..
  • WIDE APPLICABILITY - These rotary hammer chisels are suitable for demolition of walls, excavation, and removal of sharp objects. These chisels can be used for concrete, wall tiles, cement walls, stone, etc..
  • 100% MONEY BACK - For this chisel set, you will get a 30-day warranty and 100% customer support. If there are any quality problems for 30 days, please feel free to contact us, and we will give you a full refund..
Check Stock

Work Sharp Guided Field Sharpener

  • Sharepn Chisels, lathe tools, plane irons, spoke shavesm and carvinge tools to razor sharp edges. The WS3000 uses a true flat glass wheel for incredibly sharp tools and perfectly flat backs. Includes (2) glass wheels, (1) slotted Edge-Vision wheel, (2) P120 abrasive discs, (4) P400 abrasive discs, (4) P1000 abrasive discs, (1) 3600 abrasive disc, (1) P80 slotted abrasive discs, (2) P400 slotted abrasive discs, (2) P1200 slotted abrasive discs, (1) tool rest, (1) crepe stick..
  • No jigs required - sharpening port has precise and repeatable bevel angle settings of 20°, 25°, 30° and 35° for chisels and plane irons up to 2" Wide. Achieve a perfect 5° micro-bevel for fast re-honing..
  • Powerful 1/5 HP motor - with 580 rpm speed has routed air flow and a heat sink cooling system to sharpen blades fast without blade damaging heat. This low-rpm wheel maintains speed regardless of load for improved consistency, so whether your specialty is custom furniture, cabinetry, or old-fashioned wooden toys.
  • Accessories available - you can attach a wide variety of standard six-inch, adhesive-backed abrasive disks to these wheels, making it easy to select the grit you need for rough grinding or fine honing. And with two glass wheels, you can always have four different....
Check Stock

Ingersoll Rand 9500 Chisel Bit Kit for 114GQC Edge Series Air Hammer, 5 Piece Set Includes Tapered Punch, Flat Chisel, Panel Cutter, Sheet Metal Cutter, Spot Weld Breaker

  • PREMIUM SET: This pneumatic hammer chisel kit includes a set of 5 chisels made of high quality steel to provide the best in quality, strength, and durability.
  • CHISELS INCLUDED: This 5-piece set includes the following chisels: tapered punch, flat chisel, panel cutter, sheet metal cutter, and spot weld breaker.
  • USE WITH: Pair these chisels with your Ingersoll Rand 114GQC Edge Series Air Hammer.
  • RELIABILITY: Built to handle harsh environments, these chisels have undergone rigorous testing to ensure long-lasting performance.
  • INGERSOLL RAND DIFFERENCE: For more than 100 years, Ingersoll Rand’s advanced engineering, manufacturing, and service models have set a standard of excellence.
  • Trust Ingersoll Rand to help you complete your work faster and easier than ever before.
Check Stock

LAVODA Leather Strop Paddle Double-sided Large for Knife Sharpening 3" by 15" with Green White Micron Polishing Compounds Kit Stropping Block for Kitchen Hunting Whittling Folding Pocket knives

  • ... ✅ POLISHING COMPOUND 2pcs: White Compound 1 microns Aluminum Oxide, Green Compound 0.5 microns Chrome Oxide.This Micro Fine Chromium Oxide polishing compound is specially designed for use with leather strops to put a scary sharp, polished, mirror-edge on knives, carving chisels and woodworking tools..
  • ✅ WIDELY USE: This Leather Paddle Strop is perfort for kinds of Woodworking Chisels, Straight Razors, Utility Knives, Hunting Knives, Folding Knives, Fillet Knives, Kitchen Knives, Chef's Knife..
Check Stock

NATGAI SDS Plus Hammer Drill Chisel Set, Rotary Hammer SDS Bits Set 6pcs Including Tile Chisel, Gouge Chisel, Wide Chisel x 2, Flat Chisel, Point Chisel

  • APPLICABLE - These rotary hammer chisels are suitable for demolition of walls, excavation, and removal of sharp objects. These chisels can be used for concrete, wall tiles, cement walls, stone, etc..
  • COMPLETE SET - You will get 1 point chisel, 1 flat chisels, 2 wide chisels, 1 Gouge chisel, Tile chisel . These SDS plus chisels adopt the universal round handle and groove design to prevent chisel from falling and slipping effectively..
  • SIZE- Point Chisel Size: Tile chisel: 9.4"*1.57".
  • MATERIAL - Different from ordinary carbon steel used in regular hammer drill bits, this impact drill bit set is made of superior 40cr steel, which effectively improves the wear resistance and durability..
  • HEAT TREATMENT PROCESS - This SDS hammer drill bit set adopts heat treatment process and integral stamping technology to improves the toughness and hardness, and strengthen the impact force..
Check Stock

4 Pcs SDS Plus Chisel Hammer Drill Bits, Rotary Concrete Hammer Bits Set includuing Gouge Chisel, Flat Chisel, Point Chisel and Wide Chisel

  • Made of high-grade forged and heat treated steel for maximum durability..
  • 4 kinds concrete chisels break or drill a wall, concrete, stone or other materials, satisfy all your different concrete or masonry working or renovation needs..
  • Elbow chisels are mainly used for the removal of walls, tiles and cement, while other chisels can be used for the removal and drilling of concrete, brick, masonry and granite..
  • Concrete chisel set 4 in 1 including flat chisels, point chisel and groove chisel..
Check Stock

Trend DWS/HG/SET Honing Guide Diamond Stone Tool Sharpening Set

  • EASY TO USE: Set angles with positive location for roller and blade.
  • FEATURES: Wide roller to ensure no rocking during use.
  • COMPATIBILITY: Clamps chisels from 3/8 inch to 2-3/8 inches wide.
  • not for use with firmer chisels or butt chisels.
Check Stock

Mophorn Woodworking 12pcs Lathe Chisel，Wood Carving Hand Chisel 3-3/4Inch Blade Length, Wood Turning Tools with Wooden Storage Case, for Wood Carving Root Carving Furniture Carving Lathes

  • Solid Blades Design: The lathe chisels are made from 60CRV, featuring shrill edge and fine grinding. Our entire shank has been heat treated, it can be used after grinding.Durable and accurate design. Blade length is about 3-3/4" (95mm)..
  • 12 PCS Chisels Set: Chisels range in overall length is about 7-1/2" (190mm). The lathe tools includes 12 essential chisels: 1 x Skew Chisel, 3 x Flat Chisel, 1 x Fan-shaped Head Chisel, 2 x Triangular Knife, 1 x Arc Chisel, 1 x Moon-shaped Head Chisel, 3 x Gauge Chisel..
  • Secure Iron Ferrules: 60CRV blades are tightly connected to the handle by durable iron ferrules, ensuring chisels' security and reliability while working..
  • Reliable & Sturdy: Solid wood material handles. Ergonomics design offers it more comfortable while doing turning job. Each tool handle is beautifully turned hardwood that are approximately 3-1/2"(90mm) long..
  • Attractive Wood Tool Box: A wooden case for easy storage and transportation. Compact design with box Size(LxWxH): 34 x 22 x 3.5cm (12.60" x 8.66" x 1.38"). Foam bases to protect wood chisel sets from any damage..
Check Stock

Taytools 1.2 Ounce Bar Green Chromium Oxide Micro Fine Stropping Polishing Compound 0.5 Microns or 60,000 Grit (4)

  • This Micro Fine Chromium Oxide polishing compound is specially designed to be used with strops to put a scary sharp, polished, mirror-edge on knives, carving chisels and woodworking tools. It can be used on leather, wood or synthetic strops..
  • Bar weights in at 1.2 ounces and is 3/4 inches x 3/4 inches x 2-3/8 inches..
  • The waxy consistency allows it to adhere well to any substrate without powering. Simply rub the bar evenly on the surface like a crayon. A little goes a very long way, so this small bar will last for a very long time..
  • After applying compound to a strop, polish your knives and blades to a mirror, razor sharp finish. To achieve the best possible edge, finish honing by polishing your edge on raw leather..
  • This compound is micro fine with a 0.5 micron particle size and will produce an edge equivalent to 60,000 grit. Chromium Oxide (Cr2O3) is a superfine, polycrystalline abrasive, it is the mineral that gives green polishing compound it’s color. 100% made in the USA from 100% pure chromium oxide..
Check Stock

Mophorn Woodworking Lathe Chisel Set 8 Piece Set Lathe Chisel HSS Steel Blades Wood Turning Tools Wooden Case for Storage for Wood Carving Root Carving Furniture Carving Lathes Red

  • 【SOLID BLADES DESIGN】- The lathe chisels are made from high speed steel(HSS), featuring shrill edge and fine grinding. Durable and accurate design. Our entire shank has been heat treated, it can be used after grinding.This knife is an arc shape milled with a 10mm round bar CNC milling machine..
  • 【8 PCS CHISELS SET】- Chisels range in overall length is about 16.14" (41cm). The lathe tools includes 8 essential chisels: 3 x Gauge Chisel, 2 x Skew Chisel, 1 x Round Nose Scraper, 1 x Standard Parting and 1 x Diamond Parting. One free 5/8" chisel for you. Blades is about about 6.89" (17.5cm) in length..
  • 【SAFE BRASS FERRULES】- High speed steel(HSS) blades are tightly connected to the handle by durable brass ferrules, easuring chisels' safety and reliability while working..
  • 【RELIABLE & STURDY】- Solid wood material handles(Red eucalyptus). Ergonomics design offers it more comfortable while doing turning job. Each tool handle is beautifully turned hardwood that are approximately 9.06"(23cm) long..
  • 【ATTRACTIVE WOOD TOOL BOX】- A wooden case for easy storage and transportation. Compact design. Foam bases to protect wood chisel sets from any damage. Box Size(LxWxH): 17.72" x 12.20" x 1.57" / 45 x 31 x 4 cm..
Check Stock