Categories

Best Micro Motor Driver

DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine

  • 【All metal】 The linear screw adopts an all-metal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion..
  • 【Size】 Screw length: about 45mm/1.8inch, screw diameter: about 3mm/0.1inch, pitch: about 0.5mm/0.02in (moving in one step is 0.025mm, if smaller, you can use a subdivision driver)..
  • 【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the slider stroke is about 34 mm/1.3 inches, and the motor diameter is about 20 mm/0.8 inches. The driving voltage of the motor is 5-9V/200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value)..
  • 【Easy to use】 The micro stepping motor slide table can drive the accurate diagonal to move the metal slide up and down..
  • 【Application】 Stepper motor guide linear slide table can be used for DIY small slider/project/measurement equipment/laser printer, etc..
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

MINARIK MM23001C 0-90/0-180V-DC 1/4-2HP 5A AMP DC MOTOR DRIVE D506404

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional..
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

RIDGID 18V Brushless 1/2" High Torque Hammer Drill/Driver

  • Drill/Driver: All Metal Gears For extended durability.
  • Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
  • Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
  • Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
  • Brushless Motor Technology Delivers more runtime, more power, and longer motor life.
Check Stock

18V SubCompact Brushless 1/2 in. Drill/Driver and Impact Driver Combo Kit

  • Drill/Driver: All Metal Gears For extended durability.
  • Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
  • Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
  • Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
  • Brushless Motor Technology Delivers more runtime, more power, and longer motor life.
Check Stock

RIDGID 9 Amp Corded 1/2 in. Spade Handle Mud Mixer

  • Brushless Motor Technology delivers more runtime, power, and longer motor life.
  • Impact Driver: SubCompact model is 30% less weight and 35% more compact in comparison to RIDGID OCTANE Brushless Impact Driver R86039B.
  • Impact Driver: High torque output with 1,800 in./lbs. of torque and 2,900 RPM.
  • Impact Driver: Quick release hex collect ejection for easy loading and removal.
  • Battery: Up to 2X more runtime and has 2X longer life compared to standard lithium-ion batteries.
Check Stock

BIGTREETECH 3D Printer Part Stepstick Mute TMC2208 V3.0 Stepper Motor Driver with Heatsink for SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 3D Printer Control Board Pack of 5pcs Step/DIR Mode

  • ✿【High Compatibility 】 BIGTREETECH TMC2208 stepstick can be compatible with popular motherboards like SKR V1.3 / SKR 1.4 Turbo, OctopusAnycubic....
  • ✿【Avoid Losing Steps and Without Jittering 】 SpreadCycle: The motor controlled by the PWM chopper mode operated more smoothly and avoid losing....
  • ✿【Excellent Heat dissipation】 TMC2208 silent driver has a large-area cooling position to lower the temperature even stepper driver is working....
  • ✿【Ultra Silent Step Driver】TMC2208 stepper motor driver adopts stealthChop ultra-quiet technology which can driver the motor to work under....
  • ✿【After-Sale Guarantee】We offer long-term after-sales guaranteed time for 12 months, If you have difficulties in using our step driver or other....
Check Stock

Zrong 3D Printer Parts DRV 8825 DRV8825 Stepper Motor Driver Module 4 PCB Board Replace A4988

  • The DRV8825 stepper motor driver is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver..
  • The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a....
  • The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It....
Check Stock

VOASTEK Smart Card Reader USB C, CAC Card Reader with 3 Slots SD/Micro SD Memory Card Reader Compatible with Mac, MacBook Pro, Chromebook and Other Type C Laptops

  • Wide Card Suitable: DOD Military USB Common Access CAC Smart Card Reader for Government ID, National ID, ActivClient, AKO, OWA, DKO, JKO, NKO, BOL, GKO, Marinenet, AF Portal, Pure Edge Viewer, ApproveIt, DCO, DTS, LPS, Disa Enterprise Email, Reserves etc. CAC Cards. IMPORTANT NOTICE:SOME COMPUTER IT MAY NEED DRIVER, PLEASE CONTACT US FOR DOWNLOAD THE DRIVER..
  • Easy to Use: Plug and Play & Hot Swapping. No need driver/ No need external adapter. Generally this smart card reader is plugged and work without driver. While some computer may need the driver, please download on our site. DOD and USG users note you will need a third-party CAC Enabler program. Java is necessary for MAC user..
  • Wide System Compatibility: Compatible with windows (32/64bit) XP/Vista/ 7/8/10, Mac OS X.
  • 3 Slots of SD/Micro SD Memory Card Reader: The USB card reader features 3 card slots for transferring music, videos, pictures or files from cards. Support SDXC, SDHC, SD, MMC, RS-MMC, TF, Micro SDXC, Micro SD, Micro SDHC, Mini SD, UHS-I cards. Transfer data at speed of up to 128Mps, fast to transfer big files or plenty of pictures in just minutes..
  • Compact Design & Fast Date Reader and Writer: So useful but so compact. Easy to grab and go. USB 3.0 connectors ensure high data transmission ....
Check Stock

G-Hubble Ender 3 Dual Z Axis Upgrade Kit with Lead Screw Stepper Motor 3D Printer Accessories Parts for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Voxelab Aquila

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32....
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

Makita XT281S 18V LXT 2-Pc. Combo Kit (3.0Ah)

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Driver-drill (0-500 & 0-1, 900 RPM) with BL Brushless motor delivers 440 in.Lbs. Of max torque.
  • Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 in.Lbs. Of max torque.
Check Stock