Categories

Best Micro Sd Card For Raspberry Pi B

CanaKit Raspberry Pi 4 8GB Extreme Kit - 128GB Edition 8GB RAM

  • Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM).
  • Includes 128GB Samsung EVO+ Micro SD Card (Class 10) Pre-Loaded with NOOBS, USB MicroSD Card Reader.
  • CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan.
  • CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter, Set of Heat Sinks, Set of 2 Micro HDMI to HDMI Cables - 6 foot (Supports up to 4K....
  • CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4).
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

UCTRONICS Micro SD to Micro SD Card Male to Female Flexible Extender, 15cm/5.9in Micro SD Card Extension Cable Adapter Compatible with Raspberry Pi, Arduino, and 3D Printer, 4 Pack

  • You Will Be Getting: 4 pieces of 15mm/5.9inch SD card flexible adapters. Specially designed for Raspberry Pi 4B/3B/3B+, and other B/B+ Models to stretch out its Micro SD card sockets..
  • As optional accessories for the Raspberry Pi 1U and 2U Rackmount. There is 2 holes on the adapter which is totally compatible with the screw hole of the RPi mounting plate..
  • Easy installation: Simply insert one section of the flexible board into the SD card slot, and fix the other end on the bracket with screws. The sockets are push-push, just insert the card in to lock, and press in again to release it..
  • Made of FFC, this SD card adapter can recognize SD cards quickly and is long enough without affecting the reading speed at all for your Raspberry Pi cluster project..
Check Stock

GeeekPi Raspberry Pi 4 8GB RAM Starter Kit with 64GB Micro SD Card Nes4Pi Case 5V 3A USB-C Power Supply 2PCS Game Controllers Heatsinks Cooling Fan Micro HDMI Cable and SD Card Reader

  • 【Raspberry Pi 4 Model B 8GB Retro Gaming Kit】1.5GHz 64-bit quad-core ARM Cortex-A72 CPU ( ARM v8, BCM2711B0),8GB RAM (LPDDR4),On-board Bluetooth....
  • 【Great Retro Gaming look and feel】Includes 2 Classic USB SNES style Gamepads & Pi 4 Compatible NES style Case with ease of access to all Ports..
  • 【Equipped with Raspberry Pi 4 Heatsink Fan】Built-in 3510 fan can help raspberry Pi 4B cool down during you play games, 4 heatsinks for impeccable....
  • 【64GB Class 10 GeeekPi Micro SD Card】 64GB Class 10 Micro SD Card with SD card Adapter. It also comes with a micro SD card reader which is easy to....
  • 【USB-C Power Supply With On/Off Switch】With Professional Certification: FCC, TUV, RoHS Certification.
Check Stock

RETROFLAG PiStation CASE, Raspberry Pi 4 Case with 800x480 Pixel 4.3 inch LCD Monitor Display Screen, Stereo Speaker, Cooling Fan and 3pcs Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

  • 【Raspberry Pi Monitor】 Retroflag PSOne Pi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. 4.3 inch Raspberry Pi monitor equipped with IPS screen and HD 800x480 pixel high resolution..
  • 【Safe Shutdown and Reset】 This is Retroflag Pi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
  • 【Easy to Assemble & Access】 Pi 4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE..
  • 【Original PS One Console Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this Pi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second! Designed the CD-ROM drive for storing your SD cards in the appearance of a game cartridge..
  • 【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 3pcs heatsink with better heat dissipation, could prevent system failure and Raspberry Pi 4B from o....
Check Stock

Argon NEO Case with Raspberry Pi 4 4 Gig Kit | 32 Gig SD Card | Micro HDMI to HDMI Cable | Type-C Power Supply | Quick Start Guide for Raspberry Pi 4

  • Comes with the Raspberry Pi 4 Model B (4 Gig Variant). Keep your Raspberry Pi 4 cool with a pair of heatsinks readily available..
  • Includes micro HDMI to HDMI cable to easily connect the Raspberry Pi to any HD monitor..
  • An 18 watts Type-C power supply is also in the kit to provide the power the Raspberry Pi needs..
  • Enjoy using your Raspberry Pi 4 immediately with the Micro SD Card that has NOOBS installed..
  • Keep your Raspberry Pi 4 safe and protected with the Raspberry Pi 4 Compatible Case..
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

Madden NFL 21 XB1

  • The GamePi43 is a portable retro video game console based on Raspberry Pi, recalls you all the gaming pleasures in the memory..
  • This accessory pack includes add-ons required to build your own GamePi43, excerpt for the Raspberry Pi and micro SD card..
  • 4.3inch IPS display, 800×480 pixels, 60 fps smooth gaming experience, compatible with Raspberry Pi B+/2B/3B/3B+/4B.
  • Integrates battery charge circuitry, battery life indicator, powered from 18650 lithium batteries (NOT included), plays anywhere anytime.
  • Onboard speaker and earphone jack, listen to the familiar BGM from the old days, volume and backlight adjustment keys, adjust the device status according to specific game, better experience.
Check Stock

RETROFLAG NESPi 4 CASE, Raspberry Pi 4 Case with SSD CASE, HDMI Cable & Cooling Fan & Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

  • 【Compatible With】 Retroflag NESPi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. The old version uses large fan for cooling, it is affect the operation of the case..
  • 【Safe Shutdown and Reset】 This is NESPi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
  • 【Easy to Assemble & Access】 NESPi4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B computer, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE. Also this NESPi 4 Case comes with NES Cartridge style case for 2.5'' SSD, easy to install your SSD, enjoy an overall better computer experience!.
  • 【NES Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this NesPi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second!.
  • 【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 2 heatsink with better heat dissipation, could prevent system failure and Raspbe....
Check Stock

Vemico Raspberry Pi 4 Model B 2GB Set RAM 2GB Base Starter Kit with SD Card, Heatsinks, Cooling Fan, Power Supply, White Case, Reading Card Device, Screwdriver

  • 【Powerful Function】 The Raspberry Pi 4 is a small computer that can be used in a variety of ways. External devices can be linked to increase the capabilities of the system. Computer vision, speech recognition, artificial intelligence, education, robot programming, and other industries can all benefit from this technology..
  • 【ARM Cortex A72 】 The raspberry pi 4 model b adopts the latest arm cortex-a72 architecture, which is also used in high-performance smartphones, and has evolved into a real pc. Cortex A72 has 15-instruction pipeline depth, compared to just 8 on the older model, and it also provides out-of-order execution so it’s not waiting for the output of one process to start on another. So, even at the same clock speed, Cortex-A72 processors will be significantly faster and use more power..
  • 【Raspberry Pi 4 VS Pi 3】It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems..
  • 【USB Type-C Power Adapter】5V/3. A USB Type-C power adapter and power cord wit....
Check Stock

Vemico Raspberry Pi 4 Model B 8GB Set RAM 8GB Base Starter Kit with SD Card, Heatsinks, Cooling Fan, HDMI Cable, Power Supply, Case, Reading Card Device, Screwdriver

  • 【Powerful Function】 The Raspberry Pi 4 is a small computer that can be used in a variety of ways. External devices can be linked to increase the capabilities of the system. Computer vision, speech recognition, artificial intelligence, education, robot programming, and other industries can all benefit from this technology..
  • 【ARM Cortex A72 】 The raspberry pi 4 model b adopts the latest arm cortex-a72 architecture, which is also used in high-performance smartphones, and has evolved into a real pc. Cortex A72 has 15-instruction pipeline depth, compared to just 8 on the older model, and it also provides out-of-order execution so it’s not waiting for the output of one process to start on another. So, even at the same clock speed, Cortex-A72 processors will be significantly faster and use more power..
  • 【Raspberry Pi 4 VS Pi 3】It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems..
  • 【USB Type-C Power Adapter】5V/3. A USB Type-C power adapter and power cord wit....
Check Stock

PlayStation VR - Mega Blood + Truth Everybodys Golf Bundle

  • The GamePi43 is a portable retro video game console based on Raspberry Pi, recalls you all the gaming pleasures in the memory..
  • This accessory pack includes add-ons required to build your own GamePi43, excerpt for the Raspberry Pi and micro SD card..
  • 4.3inch IPS display, 800×480 pixels, 60 fps smooth gaming experience, compatible with Raspberry Pi B+/2B/3B/3B+/4B.
  • Integrates battery charge circuitry, battery life indicator, powered from 18650 lithium batteries (NOT included), plays anywhere anytime.
  • Onboard speaker and earphone jack, listen to the familiar BGM from the old days, volume and backlight adjustment keys, adjust the device status according to specific game, better experience.
Check Stock

Retroflag SUPERPI CASE NESPI Case UCase SNES Case Functional Power and Safe Reset Button with 2PCS USB Controllers, Raspberry Pi Heatsink Fan for RetroPie Raspberry Pi 3/2 Model B & Raspberry Pi 3 B+

  • Functional POWER and RESET buttons, with Functional LED power indicator.
  • It specifically designed for Raspberry Pi 3 B+ (B Plus) 2.
  • Compatible with Switch, Window, and Raspberry Pi.
  • With Micro SD Storage Part by Press Eject Button.
  • Easy to access to the SD Card,HDMI ports, Audio port,USB port without opening the case.
  • Fully tested to work with the Raspberry Pi 3 B+ and Retropie.
  • Package Includes: 1x SuperPi Case-U, 2x GeeekPi USB Controllers, 1x Cooling Fan, 1x 3pcs of Heatsinks, 2x GeeekPi USB Controllers, 1x Flannel Bag, 1x Srewdriver,1x Instruction.
Check Stock