Categories

Best Microcontroller Unit

KOOBOOK 2Sets HX1838 NEC Infrared IR Remote Control Sensor Module IR Receiver Module DIY Kit for arduino

  • Operating voltage 5V.Output form: Digital output..
  • VCC: 3.3V-5V external voltage (can be directly connected to the 5v microcontroller and 3.3v microcontroller).GND: external GND.IN: external microcontroller I/O port, I/O port has been designed 10K pull-up resistor..
  • Kit theory test distance of about 5-8 meters, but the practical application depends on the ambient factors you use, as well as the middle barrier (such as diaphragm, glass, obstructions or other material blocking), receiving head with HX1838 with power work instructions lights, receive 38K frequency any remote coding data..
  • remote Control Battery:CR2032 Button batteries (Not Included).
Check Stock

Maxxima Dimmer Electrical Light Switch with Blue Indicator Light, LED Compatible, 3-Way/Single Pole, 600 Watt

  • Wide Compatibility: This 120V dimmer switch is suitable for most silicon controlled dimming lamps on the market, mainly for traditional home lighting (downlights, LED dimmable bulbs, tungsten lamps, fluorescent tubes).
  • High Wattage Capacity: This 3 way dimmer switch is designed for incandescent bulbs up to 600W and dimmable LED and CFL bulbs up to 200W.
  • Easy and Smooth Dimming: This dimmer light switch can dimmer a room as needed for 10-100% range control.
  • Strong Dimming Effect: This dimmer switch for LED lights with external Microcontroller Unit (MCU) achieves the best effect if there are small problems such as flicker, more compatible than normal dimmers.
  • Reliable Quality: This dimmable light switch has ETL safety certification with a 2-year warranty. If you have any problems, please contact us..
Check Stock

Adafruit Metro 328 with Headers - ATmega328

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader.
  • A fully assembled and tested microcontroller and physical computing board with through-hole headers attached.
  • 32KB of flash and 2KB of RAM, running at 16 MHz.
  • Compatible with "Classic" and "R3" Shields.
Check Stock

X-Tronic 3020-PRO • 75W Soldering Iron Station • C/F, Calibration, Sleep Features • 2 Helping Hands • Silicone Tool Mat • 5 Extra Tips • Roll of Solder • Tweezers • Solder Sucker • Brass Sponge/Flux!

  • PRODUCT FEATURES: ESD Safe, Antistatic Design, a Genuine Samsung Microcontroller, 6 Programmable Temperature Preset Buttons (3 for Each Soldering Iron), Programmable Calibration Function (±50°C), Celsius/Fahrenheit Conversion, Programmable Sleep Function (0-99 Minutes) and Automatic Shutdown Feature (0-99 Minutes)..
  • COMPLETE KIT INCLUDES: The 8010-XTS Complete Kit Includes a 150 Watt Output (180 Watts Max) Main Power Unit plus 2 Separately Programmable 75 Watt Output Soldering Irons, 5 Extra Soldering Tips, Dual Soldering Iron Holder, Side Solder Roll Holder, Solder Sucker, Stainless Steel Pinpoint Tweezers, Pocket Pack of 8mm - 60/40 Solder, Brass Tip Cleaner with Cleaning Flux and Complete Instructions..
  • PRODUCT SPECIFICATIONS: Main Power Unit - 150 Watts Total Output (180 Watts Maximum), Soldering Irons - 75 Watts Output Each with Temperature Ranges of 212°F - 896°F/100°C - 480°C and a Temperature Stability of ±3.6°F/2.0°C. Rated Voltage: 110V/60 Hz - NO 220V Available. 52 Inch 100% Silicone Cord on the Soldering Iron & 55 Inch Power Cord with USA Type B - 3 Pin Grounded Plug..
  • The X-Tronic Model 8010-XTS was Mainly Manufactured for Professional User, but the Features are Simple Enough to Understand and Program that an Amateur will have No P....
Check Stock

Arduino Vidor 4000 [ABX00022]

  • The best of the embedded world: a low power microcontroller to handle reprogramming, communication, and analog sensing, together with an FPGA to perform high speed computation, and a dual WiFi-BLE chipset for wireless communication..
  • Mini HDMI output / MIPI camera input: can capture sound in real time, create a real-time computer reading sensor information,sending it to monitor or capture video, overlay sensor information on the image and send it to a screen..
  • Ideal for: Industry 4.0, home automation, computer vision, aerospace, telecommunications.
  • Part of the Arduino Maker Board Family for IoT Devices, easy to program with Arduino Software and Intel’s FPGA suite..
  • Easy interface between the microcontroller and the FPGA at the software level..
Check Stock

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

Diodes Incorporated Microprocessors - MPU ARM Cortex-A5 MPU 32bit, Video decoder (ATSAMA5D44A-CU)

  • 1 Pcs ATTINY84A-PU 8-bit Microcontroller with 8K Bytes In-System Programmable Flash..
  • MCU MICROCONTROLLER, 8 BIT, ATTINY, 20MHZ, DIP-14..
  • 8K Bytes of In-System, Self-programmable Flash Program Memory.
  • 512 Bytes of In-System Programmable EEPROM.
  • New and original ,quality ensured , no-hassle refund if you are not 100% satisfied!.
Check Stock

Prg-108 GQ-4X V4 (GQ-4X4) Programmer + ADP-019 PSOP44 Adapter V2

  • The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families.
  • The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
  • STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software..
  • STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments..
Check Stock

Juried Engineering LM393AP LM393 Precision Dual Differential Comparator, Industrial Grade IC DIP-8 Breadboard-Friendly (Pack of 20)

  • The module is made of high‑quality components and processed with stable performance. It can be widely used in various voltage measurement and control applications..
  • The controller presets 5 different functions and can customize and add other specific functions according to the user's needs..
  • Increase the automatic power saving function, the user can set it autonomously. All setting parameters can be saved automatically, and the setting contents will not be lost when power is off..
  • The voltage monitoring module is a multi-function voltage monitoring controller that uses an industrial-grade microcontroller as the main control unit with a wide measurement range and high accuracy..
  • The user can set the upper voltage limit and the lower voltage limit. Measurement range is 0-100V DC, measurement accuracy +/-0.1V. Newly added 0-99.9 seconds delay pull and 0-99.9 seconds delay off function..
Check Stock

GY-AS3935 AS3935 Lightning Detector Sensor Thunder Storm Warning Distance Detection Module for Arduino Raspberry Pi Weather Station（Max 40km）

  • AS3935 lightning module can be either powered by an internal voltage regulator or directly by VDD..
  • GY-AS3935 lightning sensor cannot drive an LCD display on it own. It need a microcontroller, like ESP8266/ESP32 etc.The Microcontroller will control....
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Counting Scale for Parts and Coins | 66lb x 0.0011lb | 30kg/0.5g | Precision Electronic Digital Gram Scale Industrial Scale Lab Industrial Counting and Weighing Without Battery and RS232 Data Cable

  • Material: ABS + Metal Five weighing modes. Digital counting scale features the following....
  • The counting gr scale is composed of a lab-quality load cell and a high-performance microcontroller. Can provide you with reliable readings. RS232....
  • Function: Tare function, external calibration, Counting function, alert, print，Unit: Pounds, Kilograms, Ounces, Grams. Apply to the laboratory,....
  • Large LCD screen, with bright white backlight for clear reading. Counting Scale can potentially save you time and money spent accounting for parts,....
  • IMPORTANT: The counting scale can be used with power or a battery. Due to shipping restrictions, we can't mail the battery together, but we will mail....
Check Stock

HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V

  • Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission..
  • The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode..
  • It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands..
  • AT command interface with "auto baud" detection..
  • TTL serial port for serial port, you can link directly to the microcontroller.
Check Stock

GY-AS3935 Lighting Sensor Module SPI I2C MA5532-AE Lighting Strike Thunder Storm Distance Detector Breakout Board

  • Reference link: https://tinyurl(dot)com/AS3935-light-detector.
  • Video link: https://youtu(dot)be/oXqSIyaHR_I.
  • The splitter uses an inductor (antenna) designed specifically for this application, and the board is fully calibrated.This ensures that you can support low-level IC calibration without having to write a large back-end – focus on your end application!.
  • This sensor cannot drive an LCD display on it own It will need a microcontroller, like ESP8266/ESP32 or Arduino Pro Mini / Pro Micro 3.3V The Microcontroller will control the sensor and control the display as well..
  • What you will get is : 1 X GY-AS3935 Lightning Sensor.
Check Stock