Categories

Best Micrometer For Surface Finish Measurement

Fowler 52-095-007-0, Universal Measuring Set

  • Dial Caliper: This measurement tool set includes Fowler 52-008-007-1 dial caliper with 0.001" graduations.
  • Micrometer Gage: Fowler 52-229-201-0 vernier micrometer with 0.0001" graduations and 0-1" measuring range.
  • Flexible Rule: The set also contains a 6" flexible rule with 32nds, 64ths, 10ths, and 100ths graduations.
  • Easy Storage: This measurement kit comes in a shop-hardened case for storage.
Check Stock

Kynup Digital Caliper, Caliper Measuring Tool, Micrometer Caliper with Large LCD Screen, Stainless Steel, IP54 Splash Proof, Easy Switch from Inch Metric Fraction, Large LCD Screen (6 Inch)

  • 【Accurate Measurement】The measurement range of Kynup digital caliper is 0 - 6''/ 0 - 150 mm.
  • accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Prescise and accurate vernier caliper digital. for household or DIY measurement. Please choose stainless steel digital caliper for more accurate measuring..
  • 【Large LCD Screen】High quality digital vernier caliper, the large and easy-to-read LCD display helps you get precise results quickly and easily. even under strong sunlight or in dismal surroundings. Aslo the locking screws ensure that the measuring jaws are securely secured, allowing for more precise measurements..
  • 【Screen Splash Proof & Stainless Steel Material】The dial caliper micrometer is constructed of first-class STAINLESS STEEL, Screen Splash Proof, anti-rust, which has a strong frame with lockable head. The housing is made of metal with silver paint on the surface. Note: please do not install the battery backwards..
  • 【3 Units Conversion】 You can switch 3 units with the digital micrometer: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
Check Stock

Premium Outside Micrometer Set 0-4\ / 0.0001\ (0-1\/1-2\/2-3\/3-4\) Precision Machinist Tools w/Carbide Tips, Standards, Ratchet Stop

  • HIGH-PRECISION MEASURING TOOL SET: Set includes a 4 carbide outside micrometers, calibration standards, and adjusting wrenches packaged neatly in a padded hard shell case. Every order you will receive a set of 0-1" / 1-2" / 2-3" / 3-4" outside micrometers with microfine Graduations: 0.0001" and Accuracy: ±0.0001" for precise readings every time.
  • FRICTION/RATCHET-STOP THIMBLE: Each micrometer has a metal ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. To Prevent over tightening the constant-force mechanism stops the micrometer’s spindle from tightening once it contacts the surface of the measured object.
  • EXCLUSIVE RED COLOR FINISH: We believe your tools should work great and be something you're proud to display. That's why we have designed this exclusive Direct-Reading Vernier Scale Micrometer set unlike any of the others. The red textured design and satin chrome thimble helps resist rust, reduce glare and are easily identifiable in your shop.
  • WIDE VARIETY OF USES: This Outside Micrometer Set is Perfect for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools. Sandor Tools Outside Micrometers help you measure the outside dimensions (OD) of raw materials, whole wo....
Check Stock

Kynup Digital Caliper Calipers 6 Inch Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 150mm

  • 【Precise & Accurate】Kynup digital caliper has a measurement range of 0 - 6''/ 0 - 150 mm.
  • accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Perfect and accurate caliper measuring tool for household or DIY measurement. Please choose stainless steel digital caliper for more accurate measuring..
  • 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
  • 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries.
  • 【Wide Application & Auto Off】The 6 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists, woodworkers, DIY. Auto shutdown for saving battery after within 6 minutes if without operation.
  • 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, whic....
Check Stock

Fowler 52-248-001-1 Outside Metric Micrometer with 0-25mm Measuring Range

  • Micrometer Gage: The outside micrometer features a flat anvil and spindle for general purpose measuring with microfine graduations.
  • Accurate Measurements: Anvil and spindle hardened and precision ground with micro-lapped finish on tips.
  • 0.256" diameter of measuring faces, 0.01mm....
  • Durable Material: Hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life.
  • Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with microfine graduations on a non-glare, satin chrome background, and....
  • Set Includes: A Fowler outside micrometer, a wrench, and a fitted case for storage.
Check Stock

Standard Gage 00524103 Value Micrometer and Caliper Set (Black Face)

  • Set includes a 0 to 1" external micrometer, 0 to 6" dial calipers, and a depth measuring base for making precision measurements.
  • Micrometer has 0.0001" graduations and precision of 0.00016".
  • Dial calipers have a black-face dial indicator with 0.001" graduation increments and 0.100" travel per revolution.
  • T-bar depth measuring base attaches to the dial calipers to aid measurement of holes and recesses.
Check Stock

Fowler 52-229-214-0 Economy Outside Micrometer Set with 0–4 Range (Set of 4)

  • Micrometer Set: With flat anvil/spindle for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • High Accuracy Micrometer Set: Anvils and spindles are hardened and precision ground with microlap finish on tips.
  • 0.256" diameter, 0.00003" flatness, and 0.00005" parallelism on 0 to 1" micrometer for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive locking nut on spindle.
  • Ratchet stop thimble applies constant measuring force for repeatability between users.
  • Satin Chrome Finish: On the thimble and sleeve to help reduce rust and glare, lapped spindle thread that provides smooth movement and extends product life.
  • Set Includes: Outside micrometers of 0 to 1 inch, 1 to 2 inches, 2 to 3 inches and 3 to 4 inches.
  • 1 inch, 2 inches, and 3 inches standard, a wrench, and a fitted case.
Check Stock

Linear Motion Sliding Table, SEMXYZL80-AS XYZ High Accuracy Crosses Roller Linear Motion Manual Stage Sliding Table 8080mm

  • The Manual Linear Stages is use of aluminium alloy material with black anodized surface, high strength, wear resistance and good corrosion resistant..
  • Linear motion, with a small frictional resistance..
  • Using accurate cross roller slides, through micrometer load, high-precision smooth movement..
  • High quality sliding table, 80*80mm table size, accurate machining and stable performance, good using effect..
  • Widely used in production machinery, inspection equipment, optical laboratory precision measurement, fine-tuning displacement, mechanical equipment positioning and movement..
Check Stock

ARES 43011-1/4-Inch Drive Micrometer Torque Wrench - Dual Torque Scales - 40-200 in/lbs (4.52-22.6Nm) - Click Torque Wrench - Ultra Smooth Torque Dialing with High Visibility Laser Etched Markings

  • ITEM SPECIFICATIONS: The ARES 1/4-Inch Drive Micrometer Torque Wrench features dual torque scales with in/lbs and newton meters readings and ranges of 40-200 in/lbs and 4.52-22.6 Nm with an accuracy tolerance of ±3%. The ultra smooth handle rotation with high visibility laser etched markings makes it easy to adjust your specified torque. Designed with longevity in mind, all of our torque wrenches are calibrated before shipping and meet ANSI standards..
  • DESIGN CONSIDERATIONS: This click type torque wrench is designed with ultra smooth torque dialing, and the quick torque change mechanism features a spring loaded pull down knurled collar that secures the torque setting with a positive lock mechanism. The quick release mechanism helps you dial in your torque setting effortlessly and instantly. The click type design alerts you when torque is reach and helps to prevent over-torquing..
  • CONVENIENT STORAGE: This click type micrometer torque wrench comes with a high quality storage case, so you'll always have the perfect place to keep it while it's not in use, and you'll never have to search for it when you need it. This torque wrench features a black nickel finish on the shaft and ratchet, and a red anodized finish on the aluminum machine knurled handle. The ....
Check Stock

Digital Caliper, M MOOCK 0-6 inches Calipers Measuring Tool, Electronic Digital Micrometer Vernier Caliper with Stainless Steel Body, Large LCD Screen, Inch Millimeter Fractions Conversion/Green

  • 【Stainless Steel Digital Caliper】: Fine polished stainless steel frame with knurled thumb roller and new processing of depthometer's groove give better looking, smooth sliding, and accurate result..
  • 【Precision and Accurate Measurement】：With an accuracy within ±0.0005inch/0.01mm, this digital caliper has been a great helper for both professionals and home use；The digital micrometer glides smoothly and allows you to set zero and measure at any point of scale； Smooth and brushed stainless thumb roller easily and precision measurement..
  • 【Three Unit Conversion & Four Measurement Mode 】: It is easy to operation of unit conversion,one button quick change between three measuring modes inch/fractions/millimeter.
  • You can measure the internal, external dimensions, diameters, depth and steps with just one measuring tool. [Attention]：If there is a flickering screen, inaccurate reading, etc. that makes the caliper not work properly, please contact customer service and we will actively solve the problem for you..
  • 【Extra Large LCD Display】: Comes with a large easy-to-read LCD screen that shows instant readings with digital numbers, makes it so much more convenient than any vernier caliper or micrometer caliper.
Check Stock

Anytime Tools Tubular Inside Micrometer 2-12\ Internal Precision Set

  • Each set consists of an inside micrometer head and a series of extension rods.
  • Anvil and spindle are hardened and precision ground with microlap finish on ends..
  • Positive locking nut on spindle. be calibrated by a micrometer or ring gage..
Check Stock

Micrometer Calibration Rod Stainless Steel Calibration Bars Standard Measuring Rod Calibration Blocks Caliper Calibration Rod for Calipers Outside Micrometers Calibrating 100mm

  • High Quality Stainless Steel Material: Micrometer calibration rod is made of high quality stainless steel, high hardness,not easy to deform and durable..
  • Clearly Marked: Stainless steel standard rods have clear length markings so you can quickly select the size you want..
  • Small And Portable: Standard measuring rods are of reasonable size, light weight, and easy to use and carry.It is a necessary tool for measurement..
  • 4 Optional Specifications: Calibration rod is a professional measuring tool, there are 4 different specifications for you to choose from, 25mm, 50mm, 75mm, 100mm,meet your different measurment needs..
  • Main Application: Calibration stick is mainly used for calibrating micrometers.Micrometer calibration rod is more precise length measuring instruments..
Check Stock

UKCOCO 4pcs Small Hole Gauge Set Telescoping Full Round Spherical Shaped Hardened Bore Gauge

  • Used with an outside micrometer for measuring inside diameter of bores..
  • Extra long for gaging deep and shallow holes, slots and similar work pieces..
  • Gaging surface is fully hardened to insure long tool life..
  • 4 sizes of gages are supplied in a fitted case..
  • Spherical measuring faces hardened, Tool adjustment shaft Satin chrome finish.
Check Stock