MANAYO In-line Microphone Pream, Mic Booster Preamplifier for Dynamic and Passive Ribbon Microphones (Black)
- [Purpose]: Boost up the gain by 28db for your dynamic microphone or ribbon microphone to amplify your voice clearly..
- [Directions]: You can connect it as follows: Dynamic/Ribbon microphone → XLR cable → MANAYO preamp → Audio interface with 48v phantom power.
- Or you can plug the amplifier directly into your microphone and connect it to your interface with xlr cable..
- [Notice]: Please make sure there is a 48v phantom power supply on your audio interface..
- [Notice]: Please make sure that your microphone is a dynamic or ribbon microphone, this amplifier is not work with condenser microphone..
Check Stock
Audio Preamp Adapter Comica LINKFlEX AD2 XLR/ 6.35MM Microphone Preamp Amplifier with 48V Phantom Power, Guitar Interface Adapter for iPhone,iPad,Android Smartphone and DSLR Cameras
- 【XLR/6.35MM Audio Input】Linkflex AD2 supports XLR/6.35mm (For Instrument)audio jack.It is an easy way to connect professional microphones for iPhone Android Smartphone, Nikon Canon Camera and Guitar etc..
- 【48v phantom power Output】With the 48v phantom power (provided by 9V battery), LINKFLEX AD2 preamp adapter supports any XLR condenser microphone..
- 【Smartphone & Camera Output Mode】LINKFLEX AD2 preamp adapter supports mobile phone and camera output, please note: when using, please turn the phone and camera switch to the corresponding position..
- 【Mic/Smartphone Monitoring Switch】 With 3.5mm headphone output, the preamp adapter can monitor the sound of the Smartphone and Mic. (PLEASE NOTE: In the camera output mode,only supports microphone real-time monitor).
- 【Adjustable volume and easy placement】 LINKFLEX AD2 Audio Adapter comes with gain control knob, which is easy to adjust the volum and sensitivity of the audio input.Morever,the belt-clamp and magic-tape allows you hang the belt clamp on the belt or pass the magic-tape through the magic-tape fixing slot and attach it to the fixer for use..
Check StockL.R Baggs Anthem Acoustic Guitar Pickup and Microphone
- Patented TRUMIC carries the majority of the guitars’ frequency range while the Element Pickup carries the lowest frequencies.
- Mix control blends between the TRU MIC augmented with low frequency support from the Element Pickup and full-range Element Pickup.
- Noise cancelling microphone technology eliminates any annoying honky or boxy qualities from the inside of the guitar.
- Soundhole preamp includes volume, mix, phase inversion, battery check, and mic trim controls.
- All discrete pre-contoured soundhole preamp with preset crossover.
Check StockAudio Technica AT2020 Condenser Studio Microphone Bundle with Pop Filter and XLR Cable
- Specially Priced Package includes Audio Technica AT2020 with all items as packaged by Audio Technica, PLUS:.
- (1) Pop Filter to filter out plosives while recording vocals or speech.
- (1) 20 ft. Balanced XLR Microphone cable for connecting the microphone to a recording interface or mixer..
- Reminder: This microphone is NOT equipped with USB and will require a microphone preamp with 48v Phantom Power. For the USB version of this mic, see....
- Sonic Sense One-Year Extended Warranty Adds One Year to Manufacturer's Warranty.
Check Stock
sE Electronics DM1 Dynamite Active In-line Microphone Preamp with 28dB Gain Bundle with 2 20-FT XLR Microphone Cables and 7-Pack Cable Ties
- DM1 OVERVIEW: The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level to a preamplifier without adding noise or coloration..
- LOW SELF NOISE: With a sophisticated class-A design and high-grade FETs, the DM1 has a low self-noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum. Additionally, the DM1 Dynamite Active Inline Microphone Preamplifier offers a roadworthy, slim, all-metal design ensuring reliable operation for on-stage applications in difficult environments..
- REJECTS ELECTRICAL INTERFERENCES - The rugged metal housing of DM1 Dynamite provides efficient rejection of noise and electrical interference. You can use the mic on stage or for studio recordings..
- INCLUDES: sE Electronics DM1 Dynamite In-line Mic Preamplifier. 2 20-Foot Balanced XLR Cables Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 7-Pack of Hook-&-Loop Cable Ties..
Check StockRockvilIe 1000 Watt Home Theater Bluetooth Receiver+(4) 3.5' Black Cube Speakers
- ...ier. Multicolor LED Display. Digital Quartz Synthesized AM / FM Tuner with 50 Presets & Auto-Scan. Preset EQ: Rock, Pop, Classical, Jazz. Remote control for quick access to all functions. Vacuum Fluorescent Digital Output Display Meters. Separate gain controls for pre-amp & subwoofer. Digital Karaoke System.
- 2 front microphone inputs with volume, tone and echo controls. Built-In Mic Mixer with Echo Control. USB input for music files from USB thumb drive. 3.5mm input for lpod / MP3 player. Spectrum analyzer equalizer display. Turbo cooling twin fan system. Dimensions (W x D x H): 19" x 11.75" x 3.5" inches. Rear Outputs: Preamp output for an external additional amplifier or powered speaker. Sub preamp output to connect a powered subwoofer or an amplifier. (2) Speakers.
Check Stock
Stealth in-Line Mic Preamp, Active Booster for Dynamic and Ribbon Microphones - Reduce Noise and Add Clarity to Your Podcast or Livestream, by Coda Music Technologies
- JUICE UP YOUR MICS: Use the Stealth preamp with your audio interface’s 48V phantom power to boost your Dynamic or Ribbon microphones with 28dB of ultra clean gain. Does not work with Condenser microphones.
- safe for Ribbon and Dynamic microphones..
- STAY CLUTTER-FREE: Get rid of an XLR cable. Connect the preamplifier directly to your microphone, or connect 2 cables and hide it discreetly out of the way. There’s nothing better than a well-organized studio to boost creativity..
- SOUND QUALITY MATTERS: Reduce noise while adding microphone clarity with -70dB noise rating. You'll be able to cut through the mix without adding feedback or unwanted hiss and hum, while maintaining the pure sound of your mic..
- MATTE BLACK & COMPACT DESIGN: The Stealth microphone preamp is compact and has a matte black finish that pairs perfectly with industry-standard microphones for a minimal and stealth aesthetic..
- RELIABLE QUALITY: We are a team of musicians and pro audio engineers and we develop our products with our customers and our own needs in mind. Backed by our hassle-free guarantee, your satisfaction is our priority..
Check Stock
Nicama V2 Audio Adapter, XLR Female to 3.5mm TRS and TRRS with 48V Phantom Power for Shotgun Microphone Sennheiser MKH-416 ME66 Rode NTG-2 NTG-1, Microphone Preamp for Smartphone DSLR Camera
- Please Pay Attention to that 1: the function of real-time monitor of the headphone jack of Nicama V2 is just for IOS device. The system of DSLR Cameras and Android smartphones can not support it. 2: Nicama V2 microphone preamp works with condenser microphone but can not work with dynamic microphones. You have to learn your device when you purchase this item.
- Nicama V2 is an easy solution to connect any professional XLR microphones to iPhone, iPod touch, or iPad and Guitar and Android device, DSLR cameras Canon, Nikon, Sony mirrorless cameras..
- As a high-quality microphone preamp, Nicama V2 allows you to use professional stage microphones or high-end studio microphones, Guitar(you need an adapter) to create music with your devices.
- Works great with Clubhouse, Instagram, Zoom and many more top apps.
- 3.5 mm Headphone output for monitoring On/Off/+48V switch Gain control Power/Phantom Power provided by 9V battery.Headphone monitoring output. Audio gain control knob..
Check StockPreSonus PD-70 Dynamic Vocal Microphone for Broadcast, Podcasting, and Live Streaming
- Dynamic broadcast microphone great for recording vocals for podcasts, live streaming, radio, and more..
- Cardioid polar pattern rejects off-axis sounds for better isolation and clarity..
- Included windscreen lessens unwanted plosives and fricatives without an external pop filter..
- Works with any audio interface equipped with a microphone preamp..
- Tailored frequency response provides exceptional clarity for vocals, guitars, basses, and drums..
Check StockUpBright 9V AC/AC Adapter Compatible with Art Tube MP Studio V3 Preamplifier Variable Valve Voicing Tube Microphone Mic Preamp TubeMPSTV3, AQualities MA410910 Class 2 Transformer 9VAC Power Supply
- AC Input Voltage: 110V-117V-120VAC 60Hz or 220V-230V-240VAC 50Hz Suitable Input Voltage For Your Country/Area.
- Tested Units. In Great Working Condition.UpBright 30 days money back guarantee. 1 full year service warranty..
- UpBright New 9V AC / AC Adapter Compatible with ART Tube MP Studio V3 Preamplifier Variable Valve Voicing Tube Microphone Mic Preamp TubeMPSTV3, AQualities MA410910 Class 2 Transformer 9VAC Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU.
- Fits: ART USB Dual Tube Pre Preamp Computer interface Power Supply.
- ART Tube MP/C Single Channel Tube Preamp Compressor Power Supply.
- 9V Maxim MA Series MA410910 MA480908 MA480915 Class 2 II Transformer 9VAC Power Supply (with Barrel Round Plug Tip).
- x0xb0x 2 Mode Machines xoxbox2 MKII Power Supply.
Check Stock
Microphone Preamp Audio Booster for Vocal Recording, Livestream, Broadcast or Podcast - MB-1 Single Channel Activator for Studio by Coda Music Technologies
- USES 48V PHANTOM POWER: Professional dynamic mic preamplifier activator that uses 48V phantom power to add 25dB of clean gain to dynamic and ribbon microphones while dropping the noise floor to an astonishing -70dB. (Note: phantom power is required and must be supplied by your audio interface or an external 48v power supply. The MB-1 does not supply phantom power)..
- MIC PREAMP FOR STUDIO AND BROADCAST RECORDING: Boost the signal of quiet instrument sources like vocals, percussion or acoustic instruments, while maintaining the natural sound of your microphone. (Not meant to be used with condenser mics).
- LIVE SOUND AT ITS BEST: The MB-1 preamp is durable enough for the stage, and quiet enough for the studio. For live sound, you can reduce line noise on long cable runs and improve the gain before feedback ratio for public speakers or singers..
- PROFESSIONAL SOUND CLARITY: with -70dB noise rating you'll be able to cut through the mix without adding feedback or unwanted hiss and hum..
- DESIGNED FOR OUTSTANDING RESULTS: Coda’s microphone booster is perfect for podcasts, live streaming, radio broadcasts, live sound, and studio recording. You need great tools to get great results!.
Check Stock
PreSonus AudioBox 96 USB 2.0 Audio Recording System - Bundle With Pro Cardioid Condenser Microphone with Shock Mount and Tabletop Stand, Closed-Back Studio Monitor Headphones, XLR M to F Cable 10'
- PreSonus AudioBox 96 USB 2.0 Audio Recording System - PreSonus 1 Year Warranty -Professional Cardioid Condenser Microphone with Shock Mount and Tabletop Stand - Closed-Back Studio Monitor Headphones - XLR M to F Pro Microphone Cable 10'.
- Computer system requirements: Mac: Mac OS X 10.8.5 or laterIntel Core Duo processor (Intel Core 2 Duo or Intel Core i3 or better recommended)2GB RAM (4GB or more recommended)Windows: Windows 7x 64/x86 SP1 or Windows 8/8.1 x64/x86 or Windows 10 x64/x86Intel Core 2 processor (Intel Core i3 processor or better recommended)4GB RAM (8GB or more recommended).
- Computer system requirements (Cont.): Windows and Mac Systems: USB 2.0 PortInternet connection (for activation)Monitor with at least 1024x768 resolution20GB hard-disk spaceInternal or external 7200 RPM storage drive highly recommended.
- Mic Preamp:Frequency Response (+/-3.0dB): 20 Hz to 20 kHz.
Check Stock
Coda MB-1 Mic Activator, Ultra-Clean Gain, Microphone Preamp Audio Booster for Studio or Home Recording, Livestream, Broadcast or Podcast - Dual Channel
- USES 48V PHANTOM POWER: Two-channel dynamic mic preamplifier activator that uses 48V phantom power to add 25dB of clean gain to dynamic and ribbon microphones while dropping the noise floor to an astonishing -70dB. (Note: phantom power is required and must be supplied by your audio interface or an external 48v power supply. The MB-2 does not supply phantom power)..
- MIC PREAMP FOR STUDIO AND BROADCAST RECORDING: Boost the signal of quiet instrument sources like vocals, percussion or acoustic instruments, while maintaining the natural sound of your microphone. (DOES NOT WORK WITH CONDENSER MICROPHONES).
- LIVE SOUND AT ITS BEST: The MB-2 preamp is durable enough for the stage and quiet enough for the studio. For live sound, you can reduce line noise on long cable runs and improve the gain before feedback ratio for public speakers or singers..
- PROFESSIONAL SOUND CLARITY: with -70dB noise rating you'll be able to cut through the mix without adding feedback or unwanted hiss and hum..
- DESIGNED FOR OUTSTANDING RESULTS: Coda’s microphone booster is perfect for podcasts, live streaming, radio broadcasts, live sound, and studio recording. You need great tools to get great results!.
Check Stock
