WeldingCity 100-amp 10-ft Air-cooled MIG Welding Gun Torch Stinger Replacement for Miller Millermatic MIGmatic M-Series M-100/M-10 (248282)

  • Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal..
  • M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Referenced part number from Miller: 248282 (M-100/10-ft).
  • Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A.
  • Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

639T Allstar 9-Channel Commercial Door Control with Open/Close/Stop by Linear

  • Quantity: 1 (one) Linear 639T Open Stop Close Stationary Transmitter The Model 639T 3-Button, 9-Door, Open-Close-Stop, Stationary Transmitter is designed for commercial automatic door and gate operator applications. This transmitter can operate multiple receivers connected to multiple operators..
  • The transmitter has three buttons for Open, Close, and Stop commercial operator functions and a rotary switch to select which receiver/operator to control. The three operation pushbuttons have a surrounding bezel to shield them from accidental activation. The Stop button is colored red for easy identification. Up to nine 3-channel commercial door or gate receivers can be independently controlled by the 639T transmitter..
  • The Model 639T is compatible with 831R, 831RJ, MVP-3CH-24V-3T-4W, MVP-3CH-12V-8W-FC, MVP-3CH-24V-8W-FC, MVP-RE-24V-8W-FC, and MVP-MR 3-Channel receivers used in Open, Close, Stop applications..
  • Features Compatible with 3-channel Allstar and MVP receivers Stationary mounting Easy access to battery and coding switch Power: 9-volt battery Codes: 6561 (set by eight trinary dip switches) RF frequency: 318 MHz Dimensions: 3.625" W x 6.625" H x 2.375" D.
Check Stock

Air to Air Receiver, Aeronautical Receptor Durable Squelch Function Electrical for Aircraft and Tower Calls

  • Linear MVP 3 Channel Gate Receiver, 318 MHz.
  • 12 volt, three channel, eight wire MVP gate receiver, external antenna connector, whip antenna included, compatible with Allstar classic, Allstar, and Pulsar dipswitch transmitters and MVP transmitters, 318MHz.
Check Stock

150 Amp MIG Gun Torch Replacement for Miller - 12 Feet Cable - Two-Pin Signal Connector

  • This MIG Welding Torch is a direct replacement for Miller M-10/M-100 and M-150 MIG guns. - Cable Length: 2 feet with 16 mm2 power conductor..
  • High-quality MIG gun, small and lightweight. Suitable for most farm, shop and home projects, light repairs , maintenance, and autobody work applications.
  • Comes with compatible with Miller/Hobart Plug and 2-PIN Signal Connector, (Please check Picture #2 for dimensions and Table in Picture #4 for a list of compatible welders).
  • 169715 gas Nozzle - 000 Series Contact Tip - 169716 Gas Diffuser.
  • List of compatible Miller and Hobart welders: SideKick, SideKick XL, Cricket XL, Millermatic 90, Millermatic Millermatic 130, Millermatic 130XP, Millermatic 135, Millermatic 140s, Millermatic 175, Millermatic180s, DVIs /211, Challenger, Challenger 172, Passport, Passport Plus, Hobart IronMan 210..
Check Stock

Hobart Ironman 240 with SpoolRunner 200 (500574001)

  • Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle..
  • XT30R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips.
  • Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine..
  • Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops..
  • Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released..
Check Stock

YESWELDER Mig Welding Gun Torch Stinger 15ft (4.5m) 250 Amp Replacement for Miller M-25 169598 fit Millermatic 212 & 252

  • Premium quality 250Amp replacement MIG gun stinger torch, 15-foot (4.5m) cable.
  • This gun is a direct replacement for the GA-20C, GA-21C, and M-25 169598 welding guns..
  • Use standard Miller front consumables uses the same 169 726 gas nozzle, the same 169 728 tip adapter, the same 169 729 nozzle adapter, and the same contact tips as the OEM Miller gun .030-.035(0.8-0.9MM) diameter welding wire.
  • This 15 ft long gun will handle.030-.045(0.8-1.2mm) diameter welding wire,It comes standard with a .035"(0.9mm) diameter tip in the welding gun,and one more .035 and .045 tips in the package.
  • It fits all of the following models: Millermatic 200, 210, 212, 250, 250X, 251, 252, and Vintage.
Check Stock

ALLSTAR Garage Door Openers 110838 Wall Console

  • 7 function: up-down-stop operation.  Manual light, program radio, vacation mode, vacation mode disable..
  • Compatible with MVP, MVP-SB, Challenger 9300M and 9500M, Challenger GLE, Challenger SE and MVP Superbelt garage door openers..
Check Stock

1998 Kobe Bryant Starting lineup figure New unopened

  • Rare LEGO figure from retired 2003 Lego sets! Kobe Bryant - NBA Finals MVP in 2009 & 2010.
  • NBA All-Star Game MVP in years 2002, 2007, 2009 & 2011.
  • Exclusive to retired LEGO sports sets #3500-Kobe Bryant & #3563-NBA Collectors No. 4.
Check Stock

C3 Toys Lebron James Kyrie Irving NBA Mini Block Figures Cleveland Cavaliers Basketball Men

  • Rare LEGO figure from retired 2003 Lego sets! Kobe Bryant - NBA Finals MVP in 2009 & 2010.
  • Exclusive to retired LEGO sports sets #3500-Kobe Bryant & #3563-NBA Collectors No. 4.
Check Stock

YESWELDER Tig Welding Torch WP-20F Flexible Head Water-Cooled 25-foot Cable 250Amp

  • Premium quality 250Amp water-cooled WP-20 complete TIG welding torch package with 25-foot power cable..
  • Connection: Gas Line (Red) Connection, 5/8"-18 RH.
  • Water Supply Line (Blue) Connection, 5/8"-18 LH.
  • Power/ Water Return Cable Connection, 7/8"-14 LH with 45V11 Adapter.
  • Ideal replacement TIG welding torch for Miller Syncrowave 250, Syncrowave 250DX (S/N LE386757 and down), Miller 330A/BP and so on..
Check Stock

ECOPlugs 6 Outlet Swivel Wall Adapter, Swivel Outlet with USB Ports, Swivel Wall Tap Adapter White

  • 6 outlet swivel wall adapter - swivel 90° design helps you puts cords easily. Three Plug outlet adapter swivel, multi wall plug. Total 6 outlets swivel wall adapter. Electrical outlet extender..
  • Swivel outlet with USB ports - 2 USB ports 2. 4 amp (shared). perfect for keeping tablets, smart phones, and other rechargeable electronics ready to use. Wall plug adapter..
  • Swivel wall outlet with USB ports - swivel grounded wall adapter. One set of rotate outlets (3 on one side) allows for convenient angles to plug in, swivel Plug adapter..
  • Power swivel outlet adapter - USB charger outlet adapter, swivel power electrical adapter, electrical outlet extender..
  • Swivel wall tap adapter - swivel Plug adapter, swivel outlet, Electrical plugs, multi wall plug, UL certified..
Check Stock

SSC Controls C810-1425 TIG Foot Pedal Miller 14-Pin Plug Made in USA 25-ft Cable Replaces RFCS-14 043554 194744 Amperage Control

  • TIG welding foot pedal with steel case and professional-grade quality..
  • 14-pin plug and 25-ft cable for Miller and Hobart TIG welders..
  • Replaces Miller RFCS-14, 043554, RFCS-14 HD, 194744 weld foot control pedals..
  • Press to activate gas contactor and increase amperage.
  • release to turn off and activate afterflow..
  • Made in USA by SSC Controls Company. Certified to CSA and UL standards..
Check Stock

MVP Disc Sports Electron Nomad (Soft) James Conrad Edition Disc Golf Putter (170-175g / Colors May Vary)

  • MVP NOMAD - James Conrad's vision of a perfect putter, brought to life by MVP Disc Sports. When confidence meets cutting edge technology - you'll find yourself on the Leading Edge.
  • STRAIGHT-STABLE PUTTER - The Nomad is a neutral flier with a straight finish inside Circle 1 - expect to see some fade from Circle 2 and out..
  • 9 MM CLASS - Comfort, versatility, performance - the Nomad is a world-class putter Speed 2 | Glide 4 | Turn 0 | Fade 1.
  • ELECTRON SOFT PLASTIC - MVP's high-tech baseline material for superb grip and feel in all weather conditions. Designed to wear slowly with use, providing an added glide and neutral flight with wear..
  • PDGA APPROVED - For all professional disc golf play.
Check Stock