Categories

Best Miller Tig Torch Kit

WeldingCity TIG Welding Torch Cable Nylon Cover 24-ft Long 3-in Wide with Zipper for Torch 9 and 17 by Lincoln Miller ESAB Weldcraft CK Everlast AHP

  • Premium power cable cover for air/water-cooled TIG welding torch 9, 17, 18, 20, 25 and 26 series..
  • Cover length: 12-ft and 24-ft long. Cover width: 3-in for torch 9 and 17.
  • With Zipper. Cover is made of high quality Nylon fabric..
  • Use for most TIG welders from Lincoln, Miller, ESAB, Everlast, Eastwood, AHP, etc..
  • US-based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity TIG Welding Torch Cable Nylon Cover 24-ft Long 4-in Wide with Zipper for Torch 18 20 25 and 26 by Lincoln Miller ESAB Weldcraft CK Everlast AHP

  • Premium power cable cover for air/water-cooled TIG welding torch 9, 17, 18, 20, 25 and 26 series..
  • Cover length: 12-ft and 24-ft long. Cover width: 3-in for torch 9 and 17.
  • With Zipper. Cover is made of high quality Nylon fabric..
  • Use for most TIG welders from Lincoln, Miller, ESAB, Everlast, Eastwood, AHP, etc..
  • US-based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity TIG Welding Torch Accessory Kit 1/16 Collet-LARGE Gas Lens-Ceramic Cup-Gasket-Back Cap for Torch 17 18 and 26 Weldcraft Miller Lincoln Hobart ESAB AHP T17

  • Premium TIG welding torch accessory kit (LARGE gas lens set-up) for air-cooled and water-cooled TIG torch 17, 18 and 26 series for use with Tungsten....
  • Accessory kit contains torch consumables 10N-series collets and 45V large gas lens collet bodies (.040", 1/16", 3/32" and 1/8"), 53N/57N-series large....
  • Detailed content description for each accessory kit is shown in listed parts table and pictures. Compatible with TIG welding torches from Lincoln,....
  • For use with air-cooled TIG welding torch 17-series (150-amp) and 26-series (200-amp), water-cooled 18-series (350-amp)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

RX WELD 25PCS TIG Stubby Gas Lens 17GL332 3/32' & #12 Pyrex Cup & TIG Gas Lens Alumina Nozzle Kit Fit DB SR WP 17 18 26 TIG Welding Torch

  • This kit fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17,DB18 and DB 26 torches, along with the Weld craft WP-17, WP-18 and WP-26 torches..
  • 2pcs 3/32" 10N24S TIG Collet and 2pcs 3/32" 17GL332 Stubby Gas Lens.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel..
  • 4pcs #12 Pyrex Glass Cup 16mm and 10pcs Temperature Resistant O-rings.
  • 2pcs Cup Gasket and 3pcs Back Cup for Tig Welding Torch.
Check Stock

WeldingCity TIG Welding Torch Accessory Kit Large Gas Lens Setup 1/8 Collet-Large Gas Lens-Cup-Gasket-Back Cap for Torch 9 20 and 25 Series Lincoln Miller Hobart ESAB Weldcraft CK AHP T45

  • Premium TIG welding torch accessory kit (large gas lens set-up) for air-cooled and water-cooled TIG torch 9, 20 and 25 series for use with Tungsten....
  • Accessory kit contains torch consumables 13NL-series collets and 45VS large gas lens collet bodies (0.040", 1/16", 3/32" and 1/8"), 53N/57N-series....
  • Detailed content description for each accessory kit is shown in listed parts table and pictures. Compatible with TIG welding torches from Lincoln,....
  • For use with air-cooled TIG welding torch 9-series (125-amp), water-cooled 20-series (250-amp) and 25-series (200-amp)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

25pcs TIG Stubby Gas Lens Nozzle Kit 12 Pyrex Cup for DB SR WP 17/18/26 TIG Welding Torch 3/32

  • 25pieces TIG Torch Accessories for WP-17 WP-18 WP-26 TIG welding torch.
  • With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the pipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints. Can be welded carbon steel and some low alloy steel.
  • The insulating rings may not match the CK17 Torch.
Check Stock

WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
  • brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced custom....
Check Stock

LOTOS TT132 2 Pin Plug TIG Welding Torch (TIG Welder TIG200)

  • Designed specifically for LOTOS models TIG200.
  • Includes a 2 prong 13ft TIG torch and a TIG accessories kit.
  • TIG accessories kit includes: size 4, 5, 6 Nozzles, 3 collets,1 collet body, 1 tungsten holder.
Check Stock

Forney - 85657 9FV TIG Torch

  • TIG TORCH FLEXIBILITY-torch head adjusts to make any angle weld, ideally on thin materials.
  • AIR COOLED TIG TORCH- size 9, single flexhead TIG torch with valve located on handle.
  • COMPATABLE WITH FORNEY WELDERS- the 9FV TIG Torch holds a 125 AMP capacity with an electrode range of . 02 - 3/32". That can be used with a 200 amp Forney Welder or a lower amp welder with a size 25, DINSE connection.
  • PRODUCE A HIGH QUALITY WELD-using Forney's TIG Torch on basic materials such as: stainless steel, titanium, magnesium, aluminum and copper.
  • INCLUDES: 12. 5’ torch with 3/32” collet and tungsten electrode, size #6 nozzle, 5/8” connector and 36” gas hose.
Check Stock

WP-17FV TIG Welding Torch 17FV Flex Head Body with Gas Valve Air Cooled 150 Amps

  • 17fv tig torch have a flex head, it is easy to bend and can be used in many TIG welding process.
  • Flexible tig torch head is installed on a comfortable and light handle which have non-slip treatment.
  • Air cooling design, and a gas valve is on the wp17 torch head to control the air flow, help you do TIG work well.
  • The wp 17 torch can be uesed within 150 amp tig welding.
  • This is a flex head tig torch with a air valve, it usually be divided in tig torch 17 series.
Check Stock

Weldpro Omni 210 Dual Voltage 115V/230V AC/DC Multi-Process Welder - MIG/Flux Core/Stick/ACDC High Frequency TIG with Pulser and Aluminum Balance/Frequency Control 3 year warranty welding machine

  • Weldpro’s new 200 Amp Multiprocess welder now includes AC/DC TIG Welding with Hi Frequency Start and Pulse Control.MIG/Stick/ AC&DC TIG/ Flux Core/ Aluminum Spool Gun all new design with FOOTPEDAL and TRIGGER SWITCH..
  • Dual Gas inputs for dedicated Argon and MIX/CO2 tanks. MIG gun and TIG torch can be connected simultaneously for ease of switching between MIG and TIG.All new easy to use, multifunction data display and controls that make changing welding processes and parameters simple even for beginners..
  • 200A Welding Current across ALL PROCESSES allows welding of various thickness material and different types of base material..
  • Included VRD feature with Hi Temp and Overload protection with indicator. User adjustable inductance.Operates off 115V/230V standard household current.
  • What’s Included: 10ft NT1 MIG gun, 12ft CK 17-12-RSF Flex head TIG torch, 5AWG 10ft 200A electrode holder, 5AWG 10ft 300A T-shape earth clamp CGA 580 gas flow meter with 4.5ft gas hose, Power adapter, 0.030’’-0.035’’ knurled drive roll, 0.024’’-0.035’’V-Groove drive roll, AK-3 accessory kit, Weldpro CK17 torch protection cover, Trigger button for TIG torch, Weldpro SSC control foot pedal.
Check Stock

WP-18FV-25 WP18FV TIG Welding Torch Complete With Flexible & Gas Valve Head Water Cooled 350Amp 25Feet 7.6M

  • WP-18FV-25 Water Cooled 350Amp TIG Torch Complete.
  • With Flexible & Gas Valve torch head body and top quality.
  • Connector: Miller & 2 pins & CK35-50 Gas and Electric Cable Separation.
  • The product will be deliver exactly same our description.To avoid any dispute,please kindly double check the connectors of this torch are fit for your machine or not.If item need to be returned because the connectors do not fit your machine,you will have to pay the shipping cost of return to China ..
Check Stock

TIG Welder, Diversion 180, 120-240VAC

  • Price For: Each Series: Diversion 180 Aluminum – Material Thickness: 0.025″ to 3/16″ Mild Steel – Material Thickness: 0.030″ to 3/16″ Includes: 12.5ft. Torch with Backcap, Ceramic Gas Cup, 3/32in Collet and Collet Body, 2% Ceriated Tungsten, RFCS-RJ45 Remote Foot Control, 12ft. Work Lead With Clamp, Regulator/Flow Gauge with Hose Overall Width: 9.875″ Overall Height: 17″ Welder Duty Cycle: 35%.
  • Power Source Weight: 50 lb. Welder Min. Output Amps: 10 Features: Inverter-Based, AC/DC Power Source, Fan-On-Demand, Portable Uses Miller’s MVP(TM) Plug for Multi-Voltage Usage, Digital Display, Remote Amperage Foot Control Included Input Voltage: 120/240VAC Polarity: AC/DC Welded Material: Aluminum, Steel Welding Processes: TIG.
  • Application: Aerospace, Construction, Heavy Equipment Manufacturing, Infrastructure, Manufacturing, Railcar, Shipbuilding, Boat / Yacht, High Purity Processing Input (Amps): 11.3/16 Rated Output: 60A @ 12.4V/150A @ 16V Welder Input Phase: 1 Welder Input Hz: 50/60 Item: TIG Welder Overall Depth: 23.875″ Welder Industrial Class: Light Welder Max. Output Amps: 180 Country of Origin (subject to change): United States.
Check Stock