Categories

Best Milling Inserts For Steel

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Milling Inserts,Carbide Inserts,10PCS APMT1604 Milling Inserts,Cemented Carbide Lathe Turning Inserts,15-50HRC Hardness,Suitable for fine and semi-fine milling of Stainless Steel M Materials

  • PRODUCT PARAMETER: Item Type: Milling Inserts.
  • Processing Material: Steel, stainless steel, etc..
  • PRODUCT PERFORMANCE: APMT1604 Insert is made of hard alloy titanium plating, wear resistance and incisive blade.wear resistance, good strength and toughness, heat resistance and corrosion resistance..
  • SAFE & DURABLE: Great processing and high quality, provide fast cutting.Smooth chip removal, high hardness, high heat resistance.High-precision passivation treatment, leading coating process, long service life..
  • APPLICATION: The Milling Inserts Suitable for fine and semi-fine milling of stainless steel M materials..
  • CUSTOMER SERVICE: If you have any questions, please feel free to contact us. Our professional after-sales team will solve your problem in time..
Check Stock

ApplianPar R8 FMB22 Shank Face Mill Arbor and 400R 50MM CNC End Milling Shell Cut with 4Pcs APMT1604 Carbide Inserts and T15 Wrench

  • Reference models-- Arbor model: R8-FMB22, Milling Cutter Model: 400R-50-22-4F Carbide Inserts: APMT1604.
  • Made of alloy steel with high hardness and strength to ensure long service life.
  • For shoulder milling, face milling and slotting.
  • Package includes: 1 x R8 FMB22 Arbor, 1 x 400R 50mm cut, 4 x APMT1604 Carbide Inserts, 1 x T15 Wrench.
Check Stock

Accusize Industrial Tools 2.5'' by 0.75'' Bore, 75 Degree Indexable Face Mills with 4 Pcs Apkt1604 Carbide Inserts, 0028-2601

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 2-1/2 inch, Number of Inserts: 4, Cutter Dia.: 2.5.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

90 degree Carbide Inserts Milling Inserts APMT1604PDER Carbide Milling Inserts For Square Shoulder Face Mill Slotting Shoulder Face milling Cutter for BAP400R Milling inserts Holder

  • Model : APMT1604PDER-DP BP010 Milling Inserts.
  • Design for :Cast iron / Die steel /Ordinary steel.
  • Processing Conditions: Interrupted cut and Continuous processing Material: Carbide.
  • Great for:improve the surface finish of the workpiece, shoulder milling, face milling and slotting.
  • Advantage:Sharp and durable,smoothing cutting ,reliable chip breaking and smooth chip evacuation.
Check Stock

FomaSP CNC Milling Carbide Inserts Steel APMT1135PDER-M2 Fit for Lathe Milling Cutting Tools 10pcs

  • Item shipping area is located in Los Angeles, USA.
  • Metal Ceramic Milling Inserts APMT1135 for milling high gloss metal parts.
Check Stock

JTR 3pcs 90 Degree BAP300R End Mill Holders Indexable Inserts Tool Holder with 10pcs APMT1135PDER Milling Inserts for Machining Steel Cast Iron

  • The holder made of 40CrMo , Important material ,solid hard ,High vibration-absorbing performance.
  • The holders supports high cutting,90° Cutting angle ,Screw down insert.
  • APMT1135 Miling inserts: For shoulder milling, face milling and slotting.
  • Design for :Steel /Titanium alloy /Stainless steel / Cast iron.
  • Improve the surface finish of the workpiece, offer long service time.
Check Stock

ISCAR QPMR 100404PDN-HQ-M IC28 Carbide Milling Inserts CNC

  • Used mainly for machining aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.
  • Super positive square milling inserts for machining aluminum, stainless steel, and high temperature alloys (QUAD2000).
  • ISO Range - P/M/K / ISO Range - N/S/H (N15-N30).
  • Grade or Coating Type: Uncoated / Coating Layers: Uncoated.
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

GBJ 10pcs APMT1604 PDER ZM Milling Inserts Turning Inserts Cutting Tools ZM1135 for BAP400R Milling Inserts Tool Holders Processing Hard Steel Parts (APMT1604PDER Purple)

  • ☞ Model: APMT1604 PDER , Coating: CVD, Material: Carbide, Heat treatment makes inserts harder..
  • ☞Application: Especially suitable for processing hard steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC15 °- HRC45 °，installed on 400R Series End milling holder.
  • ☞Coating: CVD , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞Advantages : The carbide matrix combination with the AlTiN coating of composite multilayer structure greatly prolongs service life of cutting tool , has super strong film-base bonding force and extremely low friction coefficient ..
  • ☞Package includes: 10pcs APMT1604PDER ZM1135 carbide inserts for hard steel parts..
Check Stock

BAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)

  • Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
  • BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
  • Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
  • High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
  • High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check Stock