Categories

Best Milling Machine Led Light

Flymmy Sewing Machine Light LED Sewing Lighting (30LEDs) for Workbench Lathe Drill Press 2 Pack Flexible Gooseneck Arm Work Lamp with Magnetic Base 2Pcs Mounting Dics + 4 Pcs 3M Sticker

  • ...ight,(No radiation, zero stroboscopic and not dazzling) which will not do harm on your eyes for long-time working. Perfect for protecting vison and eyes..
  • 【STRONG MAGNETIC BASE】- Coming with strong magnetic base, this magnetic LED light coulld attach to any metal surface such as workbench, lathe, drill press and milling/sewing machine. The strong magnet could make it stable and secure despite of the vibration and shock during working. Very easy to install and convenient to use..
  • 【360˚ ROTATION GOOSENECK】-This gooseneck led lamp with long flexible rotation neck allow you to easily adjust it to any illumination angles you specific need. Besides, this led flexible light is also benchable and protable, and you could take it any where you need..
  • 【WIDE APPLICATION】-This LED work light not only used for workbench, lathe, drill press and milling/sewing machine for work, but also used as desk lamp at home for learning, reading magzine and doing handwork. Small led light, but very pratical and multifunctional..
  • 【ENERGY SAVING & LONG LIFE EXPECTANCY 】-This led sewing lamp could save up to 90% energy comparing to the traditional light. Its life expectancy is up to 50,000 hours. More durable and long-lasting than the incandescent lights..
Check Stock

Sewing Machine Light, Hanbaak 30 LED Magnetic Base Light with Flexible Silone Coating Gooseneck for Sewing Machine, Drill Presses, Craft, Workbenches, Lathes

  • 30 High-quality LED beads can provide enough bright light and the light is soft enough to protect the eyes. The sewing machine light is durable and can saves up to 90% of electricity..
  • Coming with strong magnetic base, this magnetic lamp could attach to any metal surface such as workbench, lathe, drill press and milling/sewing machine. The strong magnet could make it stable and secure despite of the vibration and shock during working. Very easy to install and convenient to use..
  • Perfect for Lathes, Drill Pledges, Music Stops, Sewing Machine, Home, Industrial Work, Garage..
  • This sewing machine led light could save up to 90% energy comparing to the traditional light. Its life expectancy is up to 50,000 hours.More durable and long-lasting than the incandescent lights..
  • We are committed to providing our customers with high quality sewing machine light and exceptional service. Should you have any further questions, please feel free to contact us..
Check Stock

Honoson 2 Pieces LED Sewing Machine Light 30 Pieces LED Sewing Machine Light with Flexible Silone Coating Gooseneck and Magnetic Mount Base for Workbench Lathe Drill Press

  • What will you get: you will 2 pieces LED sewing machine lights that will provide a better working environment when you're sewing at night.
  • The power cord of the LED light is 4.4 ft/ 1.35 m in length.
  • Magnetic base: there is a magnetic base of the sewing light, and it is easy to be attached and removed to any metal surfaces, such as workbench, lathe, drill press and milling/sewing machine.
  • Bright and soft light: each sewing light features with 30 pieces LED with high-density, which can achieve a high brightness to light up the area around your working.
  • Besides, light is so soft and no dazzling that your eyes will not get any hurt even with a long workingtime.
  • Various range of usages: the magnetic mount light not only can be applied for sewing machine, drill presses, desks, music stands, craft, workbenches, lathes lamps, metal lathe, but also suits as the desk lamp at home for learning, reading magazine and doing handwork.
  • 360 degree flexible neck: the LED sewing light is designed with a 360 degree gooseneck, which is easy to bend and allows you to place your light in any angle that you want.
  • The 13.8 inches/ 35 cm silicone flexible tube is on the metal gooseneck, so the sewing light is safer and more comfort and flexible to use.
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

3 Inch Cross Slide Drill Press Vise, Aluminum Alloy Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount Cross Sliding Vise with Rotating Handle for Wood Working

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining, maximum jaw is 2.73in.
  • 【High Accuracy】: The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm.
  • Ergonomic handle of the milling vice clamping machine for easy slide on and off.
  • 【Heavy Duty Construction】: Drill press vice is constructed of high quality aluminum alloy, ensures high hardness and durability.
  • The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation.
  • 【Easy to Use】: With high-strength accuracy screw, the bench milling vice holder is not easy to slip or deform, provide great stability and easy to use, high working efficiency.
  • 【Versatile Milling Vice Holder】: 3 inch cross slide drill press vise is designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc., great for home use or light professional use.
Check Stock

NextLED Cree LED Work Light with Flexible 20-Inch Gooseneck and Magnetic Base, 200 Lumen, Zoomable Lens, IP54 Rating Water Proof. for Work Bench, Auto Repairing, Grill Light, Inspection

  • 20 INCH FLEXIBLE SHAFT: With a flexible gooseneck design, this battery powered portable light is fully adjustable to fit all your lighting needs. The zoomable lens allow you to focus the light exactly where you need it. 360-degree rotation. The 20-inch-long flexible neck is longer than competitors products (usually from 7 to 14 inches)..
  • STRONG MAGNETIC BASE: The strong 20 Lb. magnetic base enables you to use this light on all magnetic compatible base, takes up as little space as possible. The magnetic base is 2x the size of competitors products..
  • ENERGY EFICIENT LIGHTING: the 200 lumen light utilizes Cree LED Technology which helps to save on energy costs. Cree LED lights gives better lumen-per-watt ratio and proven to have longer life span..
  • FIT FOR BOTH OUTDOOR AND INDOOR: With an IP-54 rating, this light can be used for camping, auto repair, workshop, reading light, desk lamp, milling/sewing machine, drill press, tight space etc..
  • DURABLE & LOW COST: It only take 3 regular AA batteries to power this light up to 20 Hours. The lifespan of the LED light is up to 50,000 hours, reducing the need to replace the bulb..
Check Stock

D26 Milling Machine Ball Handle Three Ball Handles Three Ball Rocking Handle Three Pills Handle Ball Crank 16mm Inner Hole Diameter

  • The milling machine's three-ball crank is made of high-hardness material and is durable enough for most milling machines and work benches..
  • The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use..
  • The olive-shaped hand-held part of the three-ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load..
  • The inner diameter of the three-ball crank of the milling machine is about 16mm in diameter, which is closely connected with other parts of the milling machine and is easy to operate..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Magnetic Machine LED Work Light with Flexible Gooseneck and Magnetic Base, Magnetic Base Tool Lamp for Work Bench, Lathe, Sewing Machine, shop Lighting, Grill Lighting, industrial lighting

  • ...alloy and Iron, which is sturdy and durable. 360° flexible silicone-coating gooseneck hose is rust-free, corrosion-resistant and heat-resistant. Quick heat dissipation, IP65 waterproof, suitable for most of weather..
  • 【Wide Application】The magnetic tool lamp widely used in workshop lighting, CNC lathes lighting, milling machine lighting, sewing lighting, machine lighting, drill press lighting, reading lighting, auto repair lighting, industrial lighting, work bench lighting, shop lighting, grill Lighting.
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

LANTRO JS D26 Milling Machine Ball Table Handle 3 Ball Crank Handle for Bridgeport Milling Machine

  • △Parameters:Weight: Approx. 784g / 27.7oz, Whole Length: Approx. 197mm / 7.8in, Inner Hole Diameter: Approx. 16mm / 0.6in, Keyway Width: Approx. 3mm / 0.1in, Inner Cylinder Width: Approx. 1.1in.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Premuim Quality:Made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock