Categories

Best Milling Machine Vices

Anchor Wire Vise Anchor Vise Grape Trellis Anchor Vise for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors (5 Pieces)

  • Adequate Quantity: our anchor vises set includes 5 pieces of anchor wire vices, suitable for 8 to 11 gauge wire, enough to meet your working and replacement needs.
  • Aluminum Material: these anchor wire vices are made of aluminum material with long term applicable ability.
  • These anchor wire vices can effectively keep the wire from slipping out.
  • Tiny Size: the size of our wire vise measures approx. 6 x 3.2 x 3.2 cm/ 2.36 x 1.25 x 1.25 inches.
  • Each wire vise is approx. 30 grams in weight.
  • It is convenient for you to carry or store those tiny wire vises.
  • Choice of Wire: It is recommended to use the anchor wire vise with bare or galvanized wire, not with wire with other coatings.
  • For proper application of the wire vise, please pay attention to and follow our recommendations.
  • Applicable Scenarios: our 8 to 11 gauge wire vise can be applied to build trellises, vineyards, fences or trees, providing you with an optimized experience for your garden work.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

LANTRO JS D26 Milling Machine Ball Table Handle 3 Ball Crank Handle for Bridgeport Milling Machine

  • △Parameters:Weight: Approx. 784g / 27.7oz, Whole Length: Approx. 197mm / 7.8in, Inner Hole Diameter: Approx. 16mm / 0.6in, Keyway Width: Approx. 3mm / 0.1in, Inner Cylinder Width: Approx. 1.1in.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Premuim Quality:Made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

10PCS SEHT 43 AFSN Carbide Insert Face Mill SEHT1204 X83 H01 Lathe Milling CNC Tools Milling Cutter Suitable for Processing Aluminum Alloy.

  • Vertical & Horizontal: Our rotary table for milling machine is 6"/150mm with 4 slot can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience..
  • Remarkable Quality: Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance..
  • Excellent Precision: The precision rotary table indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in seconds..
  • Convenient To Adjust: The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently..
  • Multiple Application: With a set of wrench and set of screws, the power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs..
Check Stock

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

  • ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • Straight-type handle body for holding small drilling, milling tools..
  • You can reduce the use of longer tools, which can reduce costs and improve efficiency..
  • Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Check Stock

Samfox Ball Crank Table Handle - Machine Crank Handle for Bridgeport Milling Mill d26

  • Ball Crank Table Handle is safe and convenient to replace the handle.
  • Milling Machine Ball Handle is made of high hardness material, durable to use..
  • Three ball crank table handle for milling machine using..
  • D26 Ball Crank Table Handle is suitable for most milling machines.
Check Stock

LANTRO JS - D26 Ball Crank Table Handle, Milling Machine 3 Ball Crank Handle, Replace Handle for Bridgeport Milling Mill, 16mm Inner Hole Diameter

  • △Parameters: Whole Length: Approx. 197mm / 7.8in.
  • Inner Hole Diameter: Approx. 16mm / 0.6in.
  • △Premuim Quality: The crank handle is made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

3 Axis DRO Digital Readout Magnetic Scale DRO Display Kit CNC Milling Lathe,DIY Travel Length

  • So you will have the follow product : A -----Aluminum profile 1pcs 1M and 2pcs 800mm , -Various assembly methods ,1 .you can cut it to 3pcs short scale 2. 1pcs long 1.8M and a short scale .That means the DIY kit can be widely for lathe machine .milling machine. B , 3pcs Magnetic Scale Sensor (reading head) 5um resolution , C. Magnetic Tape & Stainless Steel Strip -2.4M D,End cap - 3 Pair. E.All of accessory for mounting scale ( User Manual included ) . F Digital Readout 3 Axis DRO.
  • Why choose magnetic scale : Fully sealed redhead with perfect structure of the profile takes it match IP67 protection class ,life time is longer thna linear glass , baesd on we provide 5 years warranty.
  • High Performance- 3 Axis DRO Digital Readout can be widely used on the Milling Machine bridgeport milling machine,Lathe Machine /7inch LCD Screen DRO ,Easy for operation. Built-in User manual , freeing hands from paper manuals.
Check Stock

4" Cross Slide Drill Press Vise, Heavy Duty Cast Iron Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining.
  • 【Heavy Duty Construction】: Constructed of heavy duty cast iron, ensures high hardness and durability, hardened steel jaws on the cross slide milling vice holder add for extra durability and longevity.
  • 【Double Direction Design】: Features with double direction design, can move in horizontal and longitudinal for precise positioning, removable handle of the milling vice clamping machine for easy slide on and off.
  • 【Easy to Use】: There are several mounting holes on the bottom of drill press vice for convenient fastening firmly in position, provide great stability and easy to use.
  • 【Versatile Milling Vice Holder】: Hinged vise crank handles drops out of the way, designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc.
Check Stock

3 Inch Cross Slide Drill Press Vise, Aluminum Alloy Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount Cross Sliding Vise with Rotating Handle for Wood Working

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining, maximum jaw is 2.73in.
  • 【High Accuracy】: The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm.
  • Ergonomic handle of the milling vice clamping machine for easy slide on and off.
  • 【Heavy Duty Construction】: Drill press vice is constructed of high quality aluminum alloy, ensures high hardness and durability.
  • The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation.
  • 【Easy to Use】: With high-strength accuracy screw, the bench milling vice holder is not easy to slip or deform, provide great stability and easy to use, high working efficiency.
  • 【Versatile Milling Vice Holder】: 3 inch cross slide drill press vise is designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc., great for home use or light professional use.
Check Stock

ACTOOLS Lathe Milling Vertical Slide & 50 mm Self Centering Vise Vice-Engineering Tools

  • Lathe Vertical Milling Slide T-Slotted Caste Iron Bed of 125 mm X 100 mm in milling slide.
  • Vertical milling slide movement is approx 80 mm. Has 3 T- Slots on Table 10 mm Wide at the top of the T is 15 mm wide at the bottom of the Tee allows milling on your lathe machine.
  • Hardened Jaws with Horizontal / vertical Vee.
  • Maximum Jaw Opening 55 mm, Jaw Depth 28 mm.
  • Supplied with a 50 mm Caste Iron Self Centering Vice.
Check Stock