F&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size
- 90Degree Cutting angle Nickel Plated. Screw down insert.
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
- Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
- with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
- Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check StockEdge Technology Mini Pro Tram System 1/4 Shank
- Square the head of a milling machine quickly and easily. (1/4" Shank Size) (3" distance between indicators).
- To use the Mini Pro Tram simply lower unit to the table and adjust the head until both indicators read the same..
- Guaranteed to be equal to or better than any other tramming method or spindle squaring device available..
- Sized perfectly to fit smaller table top milling machines or cnc routers. Can be used with a sine bar or sine plate to adjust the head to precise....
- PLEASE SEE MANUFACTURER WEBSITE FOR TECHNICAL DRAWING..
Check StockAUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)
- AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
- HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
- Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
- This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
- End Mill router bits are used for side milling, end milling, finish machining, etc..
Check StockAUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)
- AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
- Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
- This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
- End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
- Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check StockSpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
- The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
- For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
- The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock
LittleMachineShop.com 0XA Quick Change Tool Post Set for 8x12, 8x14 Lathe (4083)
- 【EXCELLENT QUALITY】：The dedicated pen drilling lathe chuck body is made of high-quality steel. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
- 【APPLICABLE WORKPIECE SIZE】：The clamping range of the lathe chuck is approx 8×8 to 23×23mm for square shaped material.Weights 1.43 pounds, and 2.5" diameter..
- 【FREE ACCESSORIES】：We will provide you 2 tightening levers allows you easily to tighten and loosen the jaws..
- 【HIGH PRECISION DESIGN】：This chuck has a special V- slot design inside the jaw,which is more suitable for clamp square material. The jaws are attached to the chuck body through an I-shaped structure which has high precision and firmness..
- 【WIDE APPLICATION】：Applicable to pen-making square material clamping, auxiliary drilling, end milling.With a 1-Inch x 8TPI Thread, which is suitable for most woodworking lathes on the market..
Check StockMilling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool
- Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
- The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
- The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
- The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
- The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check StockShars 3/16\ to 3/4\ HSS Four Flute Single End Mill Set 10 PCS 404-5872 P}
- Size Range: 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4.
- Ideal for general purpose plunge, pocket and profile milling.
Check Stock
Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide
- Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
- High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
- Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
- High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
- Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check StockSKEMIX Brass Flat Rectangular Bar Stock 1/8\ x 1\ x 6\- Knife making, craft C360-1 Bar
- ✿ If you are a lover of DIY crafts, you should prepare this brass square bar, because it is indeed widely used and multifunctional, you will definitely use it..
- ✿ Brass square bar is made of brass material,has nice bend-ability and good processability， you can use it according to your requirement..
- ✿ Brass bar has high strength, high hardness and good plasticity. It can still work well under hot condition and has good corrosion resistance..
- ✿ Our brass bar stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
- ✿ Widely used in jewelry, DIY craft making, maintenance, electrical, architectural decoration, milling, lathe, etc..
Check Stock
ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools
- PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
- Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
- Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
- RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
- Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check StockBAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)
- Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
- BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
- Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
- High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
- High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check StockISCAR QPMR 100404PDN-HQ-M IC28 Carbide Milling Inserts CNC
- Used mainly for machining aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.
- Super positive square milling inserts for machining aluminum, stainless steel, and high temperature alloys (QUAD2000).
- ISO Range - P/M/K / ISO Range - N/S/H (N15-N30).
- Grade or Coating Type: Uncoated / Coating Layers: Uncoated.
Check Stock
