Categories

Best Milling Stand

BAP400R-50-22-4T Milling Cutter NT40-FMB22 Collet Chuck Holder Indexable End Mill APMT1604 Carbide Inserts for Milling Machines (#1)

  • Adopted New Coating Technology: New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time.
  • BAP400R Right-angle Milling Cutter: BAP400R right-angle milling cutter reduces blade wear and saves processing costs.
  • Fast Milling: Fast milling, screw off-position fastening designed, make the Milling Inserts and cutter fit tightly.
  • High Working Performance: This is a high precision Milling Cutter , strong rigidity, good processing effect.
  • High Hardness: The milling cutter is made of high quality material, high hardness with good impact resistance.
Check Stock

Milling Cutter, Milling Tool, ZDZCYS22DL 10Pcs 3.175mm Handle Milling Tool Cemented Carbide 2-Flute Straight Milling Cutter

  • 【Durable】10pcs cemented carbide milling cutter with high hardness, durable in use.
  • 【Material】The milling cutter is made of high-quality cemented carbide materials with long service life.
  • 【Features】The milling cutter has the characteristics of light weight, small size, easy to use and easy to carry.
  • 【Application】2-blade milling cutter is suitable for processing wood, MDF, acrylic, PVC, EVA, foam, plywood, etc.
  • 【Characteristic】Milling tool has a smooth surface, no burrs, sharp edges, milling, holes, and cutting edges.
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

Weston Stainless Steel Food Mill , 2 Quart Capacity, 3 Milling Discs, Dishwasher Safe

  • Three Stainless Steel milling discs: fine (2 mm), medium (3 mm) and coarse (8 mm).
  • included components: Weston 61-0101-W Stainless Steel Food Mill.
  • Includes 3 stainless steel milling discs that prevent pulp and skins from slipping through: 2mm fine milling disc.
  • Approximate 2-quart (1.9-Litre) capacity.
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

D26 Milling Machine Ball Handle Three Ball Handles Three Ball Rocking Handle Three Pills Handle Ball Crank 16mm Inner Hole Diameter

  • The milling machine's three-ball crank is made of high-hardness material and is durable enough for most milling machines and work benches..
  • The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use..
  • The olive-shaped hand-held part of the three-ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load..
  • The inner diameter of the three-ball crank of the milling machine is about 16mm in diameter, which is closely connected with other parts of the milling machine and is easy to operate..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

10PCS SEHT 43 AFSN Carbide Insert Face Mill SEHT1204 X83 H01 Lathe Milling CNC Tools Milling Cutter Suitable for Processing Aluminum Alloy.

  • Vertical & Horizontal: Our rotary table for milling machine is 6"/150mm with 4 slot can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience..
  • Remarkable Quality: Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance..
  • Excellent Precision: The precision rotary table indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in seconds..
  • Convenient To Adjust: The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently..
  • Multiple Application: With a set of wrench and set of screws, the power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs..
Check Stock

Blossoms & Steel (Seaside Pointe Book 1)

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

ACTOOLS Lathe Milling Vertical Slide & 50 mm Self Centering Vise Vice-Engineering Tools

  • Lathe Vertical Milling Slide T-Slotted Caste Iron Bed of 125 mm X 100 mm in milling slide.
  • Vertical milling slide movement is approx 80 mm. Has 3 T- Slots on Table 10 mm Wide at the top of the T is 15 mm wide at the bottom of the Tee allows milling on your lathe machine.
  • Hardened Jaws with Horizontal / vertical Vee.
  • Maximum Jaw Opening 55 mm, Jaw Depth 28 mm.
  • Supplied with a 50 mm Caste Iron Self Centering Vice.
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

Milling Cutter, Dovetail Groove Carbide Cemented Straight Shank 6 Flute Dovetail Cutter End Mill Slot Milling Cutter

  • High quality: The milling cutter is made of cemented carbide with high hardness and good wear resistance..
  • Unique design: The effective cutting edge of the milling cutter is 6, and the compact and practical design makes its work more stable..
  • No burr: The main body of the milling cutter is integrally formed, the surface is smooth and burr-free, and the manufacturing size is accurate..
  • Easy to use: the installation of the milling cutter is very convenient and easy..
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock