Hard Steel Splined CVD Driveshaft Axles -2pcs for Traxxas 1/10 E-Revo Summit E-MAXX T-MAXX 5451X
- Please go to the official website to check the original nubmer to determin if it fit your car or not..
- Will fit : 1/10 Revo E-Revo Summit T-Maxx E-Maxx.
- What you see in the main picture is what you will receive..
Check StockE-Revo VXL Brushless 1/10 Scale 4WD Brushless Electric Monster Truck
- Traxxas 86086-4 - E-Revo VXL Brushless 1/10 4x4 Monster Truck RTR, Blue.
- Features: Chassis: Composite tub design, low CG for improved handling and vented internal battery compartments Drive: Shaft driven 4WD Motor: Four (4)....
- Includes: (1) Traxxas 1/10 E-Revo 4WD Monster Truck (1) 2.4GHz radio system and Traxxas Stability Management (1) VXL-6s brushless power system (1)....
- Specs: Length: 23.05” (585mm) Ground clearance: 2.90” (73mm) Weight: 11.2lb (5.08kg) Height: 8.7” (221mm) Wheelbase: 14.94 " (380mm) Final drive....
- Part number(s) included (in factory packaging): 86086-4.
Check StockTraxxas E-Revo 2.0 1/10 2075 Waterproof Servo
- Make sure this fits. by entering your model number..
- Summit Digital 2075 Waterproof SERVO (Revo T-maxx E-revo Brushless Rally Rustler Bandit Slash) Traxxas 5607.
Check StockTraxxas Summit Digital 2075 Waterproof SERVO (Revo T-maxx E-revo Brushless Rally Rustler Bandit Slash) 5607
- Make sure this fits. by entering your model number..
- Summit Digital 2075 Waterproof SERVO (Revo T-maxx E-revo Brushless Rally Rustler Bandit Slash) Traxxas 5607.
Check StockAluminum Diff Differential Case Carrier for TRAXXAS 1:10 E-REVO XO-1 REVO 3.3 Slash 4X4 Blue
- For : SLASH 4WD / Hoss 4X4 VXL / Slayer Pro 4X4 / Rustler 4wd / Stampede 4wd / T-MAXX / 4-Tec 2.0 VXL AWD / 4-Tec 2.0 AWD Chassis / Ford Fiesta ST Rally / Ford GT /Ford Mustang GT / E-REVO / Revo 3.3 / XO-1.
Check StockE-Revo VXL Brushless: 1/10 Scale 4WD Brushless Electric Monster Truck
- Traxxas 86086-4 - E-Revo VXL Brushless 1/10 4x4 Monster Truck RTR, Purple.
- Features: Chassis: Composite tub design, low CG for improved handling and vented internal battery compartments Drive: Shaft driven 4WD Motor: Four (4) pole, brushless, sensorless electric, 2200kV with 6.5mm bullet connectors, 5.0mm output shaft Electronic speed control: Velineon VXL-6s with electronic brake. 4s-6s (max 25.2v), low voltage detection, fully programmable, reverse delay with lockout, ten (10) gauge silicone wires and integrated cooling fan Radio system: Tra.
- Includes: (1) Traxxas 1/10 E-Revo 4WD Monster Truck (1) 2.4GHz radio system and Traxxas Stability Management (1) VXL-6s brushless power system (1) Painted body (4) All-terrain Talon EXT tires with new tougher rubber compound Quick start guide High-quality maintenance tools.
- Specs: Length: 23.05” (585mm) Ground clearance: 2.90” (73mm) Weight: 11.2lb (5.08kg) Height: 8.7” (221mm) Wheelbase: 14.94 " (380mm) Final drive ratio: 20.49.1 Battery compartment: 156x50x29mm.
- Part number(s) included (in factory packaging): 86086-4.
Check StockRaidening Aluminum Alloy Diff Differential Carrier Case for TRAXXAS 1/10 REVO 3.3 E-REVO Slash 4X4 XO-1
- For : SLASH 4WD / Hoss 4X4 VXL / Slayer Pro 4X4 / Rustler 4wd / Stampede 4wd / T-MAXX / 4-Tec 2.0 VXL AWD / 4-Tec 2.0 AWD Chassis / Ford Fiesta ST Rally / Ford GT /Ford Mustang GT / E-REVO / Revo 3.3 / XO-1.
Check StockTraxxas E-Revo VXL 1/16 4WD Brushless RTR Truck (Blue)
- Traxxas 71076-3 - E-Revo VXL 1/16 4x4 Monster Truck RTR W/TSM, BlueX.
- Features: Traxxas Stability Management. 2-amp DC Peak Detecting Fast Charger. 7.2 volt NiMH battery pack with iDTM. TQi 2.4GHz radio system. Race-inspired suspension technology and integrated chassis design, perfectly optimized for 1/16 scale. Powered by the Velineon Brushless Power System Patented Traxxas High-Current Connector allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System. Velineon VXL-3m Electronic Speed.
- Includes: (1) E-Revo VXL Racing Monster Truck (1) TQ 2.4GHz Radio (1) Body, One(1) 6-Cell Battery (1) Charger (1) Extra Pinion Gear Instruction Manual.
- Specs: Vehicle Dimensions: Length: 12.9" (328mm) Width: 9.4" (239mm) Height: 4.6" (117mm) Front and Rear Track: 9.4" (239mm) Distance Between Outer Edges of Wheels Wheelbase: 7.9" (202mm) Ground Clearance: 1.7" (43mm) Body Dimensions: Length: 11.3" (288mm) Width: 4.3" (110mm) Height: 2.8" (71mm) Spur Gear: 45 Tooth Gear: 28 Tooth 48 Pitch Tires, 1.8" (46mm) Wide, 3.2" (82mm) Diameter Wheels, 1.5" (38mm) Wide, 2" (51mm) Diameter, 12mm Hex.
- Part number(s) included (in factory packaging): 71076-3.
Check StockApex RC Products Blue 1/10 Large Bent RC Anodized Body Clips - 25pcs #4031BL
- LARGE SIZE - Great For 1/10 Scale RC Cars, Trucks & Buggys Such As The Rustler, Stampede, Bandit, T-Maxx, E-Maxx, E-Revo, And Many More.
Check StockApex RC Products Green 1/10 Large Bent RC Anodized Body Clips - 25pcs #4031GR
- LARGE SIZE - Great For 1/10 Scale RC Cars, Trucks & Buggys Such As The Rustler, Stampede, Bandit, T-Maxx, E-Maxx, E-Revo, And Many More.
Check StockHopsupRC Front Rear Axle Carriers Knuckle Arm Upgrades Part for 1/16 Traxxas E-Revo/Mini Slash/Mini Summit,4PCS Aluminum Left Right Axle Carriers Knuckle Arm Hops Up,Replace 7034,Green
- 【Fits For】: For 1/16 Traxxas E-Revo VXL 71076-3, 71054-1.
- 【High-quality Material】: Aluminum Front Rear Body Post Mount are of lightweight and durable performance.Specially designed strengthening cut-outs for increased crash resistance. And allows you to easily replace and upgrade from the original..
- 【Long-lasting Performance】: The upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance..
- 【Easy to install】: Easy to install, great for replace the old or broken part.Increase overall performance and durability of your RC car..
- ❤【HopsupRC Guarantee】:If you are not 100% completely satisfied with our products, please feel free to contact us to request a refund or exchange! our team is willing to help you to solve the problems that you have met,Your Satisfaction is Our Top Priority..
Check StockRcarmumb Front Rear Axle Carriers Knuckle Arm Upgrades Part for 1/16 Traxxas E-Revo/Mini Slash/Mini Summit,4PCS Alloy Front Rear Axle Carriers Knuckle Arm Hops Up,(Left & Right),Replace 7034,Red
- ✅ 【Compatible with】:The RC Upgrade Parts for 1/16 Traxxas E-Revo VXL 71076-3, 71054-1.
- 【High-quality Material】: The Front Rear Knuckle Arm Upgrades Part Alloy anodized aluminum, precision CNC machined, lightweight and durable, increasing crash resistance and long-lasting durability..
- 【Long-lasting Performance】: The upgrades part is durable enough,improves the overall performance of the rc car.Specially designed strengthening cut-outs for increased crash resistance..
- 【Easy to Install】:The Hops Up Upgrades Set can be directly installed, do need any modification. It is designed to allow more smooth rotation and strength! Providing unmatched driving versatility..
- 【Rcarmumb Guarantee】:If you are not 100% completely satisfied with our products, please feel free to contact us to request a refund or exchange! Your Satisfaction is Our Top Priority..
Check Stock