Categories

Best Mini Heatsink

Big Shuriken CPU Air Cooler Big Shuriken 3

  • 69mm tall perfectly fits Small Form Factor PC ( SFF, Mini ITX, HTPC Case) Asymmetric and offset design for excellent compatibility with Mini ITX,....
  • Included Kaze Flex 120 Slim PWM fan (Sealed Precision FDB) for long lifespan and quiet operation. ** In case the "CPU FAN ERROR" message is displayed....
  • Copper base Copper base and 5 heatpipe design, the heatsink is equipped with quiet fan(15mm thick), and has option using regular 25mm thick fan for....
  • HPMS III spring loaded mounting system is easy to install and secure for INTEL LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA2011, LGA2066 and AMD....
  • Dimension: (W)122 x (D)122 x (H)69 mm, Weight: 490 g. Compatible Intel LGA1700 Motherboard: ASUS Z690A, TUF GAMING B660 PLUS D4, ROG STRIX B660G....
Check Stock

GekkoScience Compac F 300Gh/s+ USB Bitcoin / SHA256 Stick Miner Most

  • Powerful bitcoin miner in the mini usb stick, can mine any SHA256 such as btc, btc cash, digitbyte, etc.
  • Stock hashing speed: 200 GH (please note: these miners run very hot and you must provide active cooling such as fan).
  • High Speed: 350 GH++ (Running at clock speed of 545 MHz Higher speed requires usb port above spec). To reach max speed of 500GH you will need 3amp usb port per miner!.
  • Completely silent operation, includes silver mini heatsink to cool miner but requires a powered usb hub (10 watts per miner per port) to run.
  • Compatible with Windows, Mac and Linux OS using cgminer software. Includes user manual with instructions for easy setup..
Check Stock

SEALIGHT H11/H8/H9 LED Headlight Bulb, 6000K Mini Size Low Beam/Fog Lights, 50W 6000Lumens White Lighting Replacement with Fan

  • These 6000K, IP67, 50-watt, 6000lumens h11 led headlight bulbs last over 30,000 hours, with aluminum housing and turbo cool fan to prevent overheating, all-in-one compact bulbs pair.
  • Mini size, the design of S2R led bulb is almost same ratio to stock bulb, fits for 99% of vehicles, no need to modify or change dust cover, truly plug-n-play installation takes just minutes.
  • Fan-based bulb runs coolest, fan built inside, the fan blows the air on the heatsink to speed up the cooling process, greatly improve cooling without increasing the size of the heatsink.
  • Mimic the original halogen bulb filament, didoes are vertically aligned, this should create the right beam pattern and bring enough light output while do not blind the oncoming traffic.
  • CSP chips, true 6000K cool white color temperature makes it easier to match for most conditions, let it shine with a makeover of our considerate h11 led headlight bulbs, for 12 volts only.
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

SABRENT M.2 NVMe Heatsink for The PS5 Console (SB-PSHS)

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

GLOTRENDS M.2 Heatsink and Desktop PC Installation Fit for 2280 M.2 PCIe 4.0/3.0 NVMe SSD

  • M.2 heatsink cooler fits for Desktop PC installation. 0.4inch/10mm high m.2 heatsink..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent....
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long....
  • 10°C- 30°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink....
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low....
Check Stock

EKWB EK-M.2 NVMe Heatsink- Black

  • Materials used: – Aluminium front cover – Aluminium backplate – Stainless steel clips.
  • Enclosed: – EK-M.2 NVMe Heatsink front cover – black – EK-M.2 NVMe Heatsink backplate – black – Mounting clips – Thermal pad 0.5mm – Thermal pad 1mm – Thermal pads.
  • PLEASE NOTE: The heatsink is compatible with all single sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long). The heatsink is compatible with M.2 (NGFF) connectors 4.2mm heigh.
  • PLEASE NOTE: Its mandatory to mount thermal pads on both sides of the M.2 NVMe SSD. The ASUS HYPER M.2 PCIe card just for showcase it is not included!.
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock

Heatsink Heat Sink + External Cooling Fan Kit for Raspberry Pi Model B B+ B Plus 2 3 3+ Geekstory(2 Pack)

  • The heatsink and cooling fan work with Raspberry Pi Model B B+ 2 3. It also can be used for the newest Raspberry Pi 3 Model B+.
  • It can not work for Raspberry pi zero, because there is no pin header on zero.
  • Large heatsink size : 14mm * 14mm * 7mm, small heatsink sizel: 9mm * 9mm * 5mm.
  • You will receive 2pcs large heatsink + 2pcs small heatsink + 2pcs cooling fan.
  • This kit is used for Raspberry pi development board and other electronic chip auxiliary cooling .If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

VisionTek Radeon 5450 SFF 512MB DDR3 3M (2x DVI-I, miniDP) - 900529

  • Dual DVI + mDP (support 3 monitors simultaneously).
  • Dual Link DVI-I + Dual Link DVI-D + mini Display port (single VGA supported through DVI to VGA adapter).
  • SFF form factor (default config) or ATX full height (bracket change).
Check Stock

Advancing Gene M.2 NVMe Heatsink for PS5 Console, Black

  • ✅[Customized for PS5 SSD Slot] - This M.2 SSD cover heatsink is specially designed for PS5 console's SSD expansion slot, unique slim tail design will not affect the installation of the PS5 plastic cover. It can perfectly replace the original PS5 SSD expansion slot cover..
  • ✅[Premium Material Used] - Made from expensive Aviation Grade Magnesium Aluminum Alloy, anodic oxidation, fine workmanship. It not only has high hardness and light weight, but also has better heat dissipation effect, which is completely different from those cheap PS5 heatsinks. In addition, it is also equipped with extended screw and corresponding screwdriver, stable installation, to ensure that it will not fall off..
  • ✅[Optimized Heat Dissipation Design] - Different from other closed designs, we adopted unique surface cooling slot + through-hole design to allow heat from the SSD card slot to dissipate out. With the help of PS5's built-in fan, air circulation can be accelerated to maximize heat dissipation affect..
  • ✅[Quick and Easy Installation] - Advancing Gene heatsink for the PS5 console compatible with all kinds of M.2 NVMe SSD and easy to install: >> 1. Use the screwdriver remove the original SSD cover plate of PS5.
  • >> 2. Use the extended screw enclosed to fix the new ....
Check Stock

GLOTRENDS M.2 Heatsink with M.2 Thermal Pad for 2280 M.2 PCIe 4.0/3.0 NVMe SSD (2 Packs)

  • 2 packs of M.2 heatsink fits for PS5/PC installation. 0.12inch/3mm high m.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent Rocket 4, Samsung 980 Pro, Samsung 970 Pro, Silicon Power US70, and etc..
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation..
  • 5°C- 20°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink can extend the life of M.2 PCIe SSD..
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low viscosity, thermal conductivity, and insulation..
Check Stock