JGINYUE H97 Mini ITX Motherboard, White LGA 1150 Motherboard Support Intel i5 i7/Xeon E3 (DDR3/M.2 NVME/M.2/VGA DP HDMI-Compatible/PCIe X16/SATA 6Gb/s/2 Gigabit Ethernet)
- LGA 1150 Mini ITX Motherboard: Equipped with LGA1150 CPU socket, supporting Intel i5/i7 and Xeon E3 series processors..
- Three image transmission interfaces: This mini itx gaming motherboard supports VGA, DP, and HDMI-compatible high-definition high-performance graphics and audio signal display, you will have more choices in configuration..
- Dual M.2 slots: The Intel motherboard with M.2 NVME protocol (support NGFF) slot, transmission power up to 32Gbps. Can support M.2 NGFF card.
- DDR3 dual-channel memory: The LGA 1150 computer motherboard supports dual-channel Non-ECC Unbuffered DDR3, 1600/1333Mhz effective frequency. The maximum memory capacity is 16G..
- Stable power supply: 4-phase power supply CPU stable power supply, all solid-state capacitor design, equipped with 24+8 pin power interface, to ensure the stable operation of the motherboard..
Check Stock
MUSETEX MATX (Micro-ATX) PC Case with 2pcs ARGB Fans Type-C Port USB 3.0 Airflow Mid Tower Mesh Front Panel Tempered Glass Side Door Mini ITX Computer Gaming Cases (Y3-N2-BW)
- ...th 1x Type-C Port, 1 x USB 3.0 Port, 2 x HD Audio, LED/Power Button. Our USB cable is shielded wire so that you can transmit data without interference..
- [Tempered Glass Side Door] MUSETEX Y3 series micro-atx case has Tempered Glass opening door and Mesh Front Panel, making it easy and free to disassemble and install computer accessories. High-quality metal frames and clean cable management strips with dedicated routing allow you to build a durable and beautiful computer host..
- [Addressable ARGB FANS] 2pcs 120mm ARGB fans are pre-installed to provide beautiful lighting and excellent airflow. The color of the fans can be controlled by the LED buttons on the I/O panel as well as by connecting the motherboard for software control..
- [ Perfect Capacity ] Mesh PC case is effortless to install 3 x 2.5" SSD.
- Motherboard Compatibility: Micro-ATX/ Mini-ITX.
- [MUSETEX Y3 Series] Motherboard Compatibility: Micro-ATX and Mini-ITX. Not for ATX motherboard..
Check StockDC 12V 150 watt Pico PSU ATX High Mini-ITX Power Supply with Adapter Board ATX Switch PSU Car Auto for Computer Mainboard and car/Motorcycle
- 150 watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
- The mini-itx power supply Short-circuit protection: output shut down when short-circuit,.
- Pico power supply input connector: 2.5mm inner diameters, 5.5mm outer diameter.
- The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector,pico psu with adapter.
- Perfect DC PSU for mini ITX Motherboards.
Check StockMini ITX Case Aluminum PC case Silver Desktop DIY Computer Chassis 240Water Cooling/Air Cooling SFX Power Type C Case with Black Tempered Glass Panel…
- ZZEW unique design: 13.9L capacity with size 13.79*6.42*10.05 inch, Mini ITX B6 is specially designed with front panel 3mm black tempered glass.
- Support ITX motherboard 170*190*170mm, 2*2.5-inch HDD/1*3.5-inch hard disk, SFX power supply.
- ITX Case body is full 3.0mm aluminum alloy with edage parts CNC polished hand working. B6 is big and with workmanship high-end among mini itx pc case series.
- With USB 3.0 Type-C port design+Switch wire+power supply extension cord.
- 4-sided hollow mesh design makes a high efficent heat dissipation , support 5 fans in max with 240 liquid cooling.
Check StockNAS 8-Bay K7 Chassis Cable Management System PC Gaming Computer Case New Ultra Silence
- You will get- A computer case with accessories including mute back fan*3, back panel*2, 8 hard disk stand, SATA data cable, various screws. ( Motherboard CPU and other accessories are not included ).
- Support- Various ITX motherboards in the market: 17X17cm（6.7“*6.7“）.
- ATX motherboards 24X24cm（9.6“*9.6“）.
- DIY assembly of NAS servicer- The server assembles case not only good to meet the needs of computer hardware enthusiasts DIY, but also it will help you get a cost-effective server..
- Ultra Silence – For powerful airflow out of the box, the case comes pre-equipped with 2 * 9025fan.
- Mini Body- Miniature and elegant chassis, convenient placement, not occupy much space..
Check StockDIY ITX MATX ATX Computer Open Air Case, Aluminum Open Frame Computer Case, PC Test Bench Vertical Motherboard Chassis DIY Kit(Blue Black)
- Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
- Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
- DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
- ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
- Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..
Check StockMini ITX MATX ATX PC Test Bench Open Air Frame Overclock Case Computer Mount Aluminum Chassis for HTPC Graphics Card
- Package including:1 x assembly parts of computer case.
Check StockGoodisory A09 Black Mini-ITX 0.8mm SPCC Desktop Computer Case Fit in Flex PSU
- Size: extreme small size (9 x 7.4 x 3.5in ) design to fit in both Mini-ITX motherboard and Flex PSU (5.9 x 3.2 x 1.6in)..
- Cooling system: abundant heat emission holes including front panel, are designed to solve common cooling problem of mini computer case..
- Extension design: a slot of PCIE, two WIFI holes, and two USB 3.0 and HD audio..
- CPU cooler: no taller than 75mm when install a M.2 hard disk.
- no taller than 60mm when install a 2.5” SSD on top.
- Portability: small volume (3.8L) allow it easy to be put in backpacks, luggage and on desktop..
Check StockScythe Kaze Flex Slim 120mm RGB LED Fan PWM 300-1800RPM No Controller Included Single Pack
- Slim design only 15mm thickness(17mm with Anit-Vibration Rubber), this thin fan is ideal for SFF computer(HTPC, Mini-ITX case) or low profile CPU....
- Newly designed blade and frame contribute high airflow with low noise, ideally for computer case, radiator/heatsink and CPU cooler. PWM control offers....
- Using Sealed Precision FDB for long life span and quiet operation.Included antivibration rubber pads covering each corner of frame. These decouplers....
- 8 high quality LEDs built into central hub, the lighting is bright and even reflected with milky-white blade. The 4-pin 12V RGB connector allows fan....
- Connector: 4-Pin, Dimension: 120x120x15mm(17mm with Anit-Vibration Rubber), Fan speed: 300±200~1800±10% RPM, Airflow: 8.28~50.79CFM, Noise:....
Check StockIN-WIN 150W Mini-ITX Slim Case Black BQ656T.AD150TB3
- Chassis: Mini-ITX s.F.F slim chassis (Ultra small form Factor).
- Power supply: 150W internal PSU (ip-ad150a7-2).
Check StockInwin Development BP655FH300TB3 Haswell MiniITX Chassis BP655 Cases BP655.FH300TB3, Black
- Design that delivers high availability, scalability, and for maximum flexibility and price/performance.
Check StockAluminum Mini ITX Case with PCI Riser JOYJOM Mini PC Case SFF Small Form Factor PC Case TX Computer Gaming Case Supports GPU Graphics Card Black
- 【Ultra Mini ITX Case with PCI 3.0 Riser】The Case is only 4.3L capacity, the size is 18.4x10.4x22.3 cm (7.3x4.1x8.8 inch), PCI 3.0 Riser Cable is 18.5cm.
- 【Compatibility Accessories】Support Standard ITX Motherboard(17x17cm), FLEX-Small 1U Power Supply (15*4*8cm), Graphics Card (17*10*4cm), Hard Disk(2x2.5inch SSD, thickness less than 9mm), CPU Cooler(Less than 36mm).
- 【High-quality Material】The Body of Case is made of 2.0mm Aluminum Alloy, which has good heatsink performance anf beautiful appearance.
- 【Packing Include】1* Mini ITX Case, 1*PCI 3.0 Riser and some Screws ONLY.
Check StockZalman CPU Fan Cooling CNPS2X Red
- Dimensions: 84mm(L) x 84mm(W) x 27mm(H) / Weight: 83g / Materials: Pure Copper, Aluminum / Bearing Type: Long Life Bearing / Power Connector: 4-Pin....
- Top Down Airflow: The cooler pulls in cool air from directly above the CPU downward to quickly cool the CPU and motherboard. DTH-based (Direct Touch....
- Ultra Quiet 80mm Fan: PWM fan allows for automatic speed control via the motherboard, built with long life bearings and noise-elimination technology....
- Ultra Flat Profile: The super compact cooler is only 27mm tall and can be mounted in all computer cases, including mini ITX cases, perfect for small....
- Compatibility: Intel LGA1156 / 1155 / 1150 / 775.
- AMD FM1 / AM3+ / AM3 / AM2+ / AM2. Does not fit AM4..
Check Stock
