Categories

Best Mini Limit Switch

MOLUK Mini Bilibos Baby Toy

  • The colorful Mini Bilibos are durable and wonderfully versatile play objects that will accompany kids from their first year onwards.
  • The Minis can be stacked and nested, they act as floating ducks, sand shovels, candy bowls, spinning tops, racing cars or scoops for snowballs.
  • Just like their big sibling, the colorful Mini Bilibos are durable and wonderfully versatile play objects that will accompany kids from their first year onwards.
  • The Minis can be stacked and nested, they act as floating ducks, sand shovels, candy bowls, spinning tops, racing cars or scoops for snowballs. The only limit is your imagination.
Check Stock

Dishwasher Garbage Compactor Direction Switch WP777811 777811 For Whirlpool Genuine OEM Original Aftermarket Repair Parts

  • This top limit and directional switch (part number WP777811) is for trash compactors. Top limit and directional switch WP777811 shuts off the motor when the ram reaches its upper travel limit and controls motor direction to move the ram up and down.
  • Replaces : 777811, 714888, 749064, 242682, 4163405, 14210601, Y777811, 7-49064, 7-77811, AH386764, EA386764, PS386764.
  • The part can be used if your trash compactor doesn’t stop at end of compacting cycle or works too noisy.
  • Compatible with Brands : KitchenAid, Maytag, Whirlpool, Jenn-Air, Kenmore, Amana, Magic Chef, Admiral, Roper, Norge.
Check Stock

Genie Garage Door Opener Limit Switch 24454R, 19563R

  • Screw Drive/PCG600 Limit Switch Replacement.
  • For all Genie screw drive units, other than the newest magnetic limits for Excelerator screw drives..
  • For screw drive magnetic limits see 33950S.S and 33950R.S..
Check Stock

Replacement for Garage Door Opener Limit Switch, Genie Part # 33950S.S

  • Replacement For Genie Excelerator Limit Switch Assembly.
  • Replacement For Genie Garage Door Opener “Close Stop” Limit Switch model 33950S.
  • Replacement For Works only on Genie and Overhead Door Excelerator Models.
Check Stock

CHENBO 5pcs 3Pin End Stop Limit Switch Mechanical Endstop Switch Module for 3D Printer CR 10 Ender3

  • 3D Printer Accessories Limit Switch 3Pin N/O N/C control easy to use Micro Switch.
  • Normally 3Pin mechanical limit switch for 3D Printer.
  • Compatible with CR-10 Series, Ender-3, or other 3D printer.
  • Small and compact size, easy installation, just plug and play.
  • A good accessory will work perfect with your 3D printer.
Check Stock

Blackmagic Design Pocket Cinema Camera 6K Pro (EF Mount) with SanDisk Extreme PRO 128GB SDXC Memory Card (UHS-I/V30/U3/Class-10), 2X Seller Supplied Replacement Batteries & More

  • Multiple Outlet Wall Plug: 12 AC outlets with 1680J Surge protector wall mount, 15A Current Limit switch, Safety ground indicator Light, surge protection indicator light, 2 hanging hole for all types of Standard Electrical Outlets.
Check Stock

MUSYSIC Professional 2 Channel 7000 Watts DJ PA Power Amplifier Signal out MU-P7K

  • Stereo Output Power: "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @2Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @4Ω" "2x1000W PEAK, 2x500W Program, 2x250W RMS @8Ω".
  • Bridge Output Power: "4000W PEAK, 2000W Program, 1000W RMS @4Ω" "2000W PEAK, 1000W Program, 500W RMS @8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) : ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry: Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V /.
  • Connectors: Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
  • Dual cooling fans / Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit. / lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit. / Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check Stock

Genie 33950R Garage Door Opener Limit Switch Genuine Original Equipment Manufacturer (OEM) part for Genie, Gray

  • Genie Replacement Open Limit Switch (33950R).
  • Genie garage opener Excelerator model open limit switch assembly 66″ length wire included.
  • Original Genie Manufactured Replacement Part.
Check Stock

MUSYSIC Professional 2 Channel 9000 Watts DJ PA Power Amplifier Signal out MU-P9K

  • Stereo Output Power: "2x5600W PEAK, 2x2800W Program, 2x1400W RMS @ 2Ω" "2x2800W PEAK, 2x1400W Program, 2x700W RMS @ 4Ω" "2x1400W PEAK, 2x700W Program, 2x350W RMS @ 8Ω".
  • Bridge Output Power: "5600W PEAK, 2800W Program, 1400W RMS @ 4Ω" "2800W PEAK, 1400W Program, 700W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Dual cooling fans / Connectors Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..
Check Stock

Baomain Horizontal Roller Plunger Limit Switch TZ-6102 with M20 Cable Glands Work for Heavy Duty Door Sliding Doors/Windows Pioneer,Welbon Air Curtains Maxwell with IP65 Waterproof

  • Built-in CM miniature limit switch, strong aluminum cast shell, design for water-proof and oil-proof.
  • It is the same as CM micro switch in the rated value and characteristics.
  • Various of actuators that are taken convenience for using.
  • Each switch is equipped with cable fixator, including rubber boot, metallic washer, plastic screw nut.
Check Stock

Creality 3pcs/Lots Endstop Limit Switch 3D Printer Part for CNC 3D Printer RepRap Makerbot Prusa Mendel RAMPS 1.4 Board Ender 3/5/pro/V2 CR-10 S4 S5 Series

  • Compatible with all Creality FDM 3D Printer.
  • 3D Printer Accessories Limit Switch 3Pin N/O N/C control easy to use Micro Switch.
  • Package Included: 3 PCS * Endstop Limit Switch.
Check Stock

Micro Linear Actuator with Switch Controller, 1.2\ Stroke Small Electric Motion Actuators 12V DC, 64N/14.4lb, Speed 0.6inch/s, w/Mounting Brackets, Rocker Switches, for Cabinet, Window Opener, Robot…

  • Linear Actuator With Rocker Switch Kit - 64N Small electric actuator powered by 12 volts DC are mini actuator which create motion in a straight line, suitable for small and medium-sized loads, with mounting brackets, rocker switches, you can easy mounting it and manually control the extend and retract of the push..
  • Hold On Position You Want - Reverse polarity rocker push switch with ON/Off/ON 3 operation press button, it will in locked state, compare with momentary switch, do not need you hold the switch button all the time. Press “Off” button you can turn off power to the motor and stop position as you wish, More flexible and secure when you close window or pigeon cage..
  • Strong and Durable Linear Actuator - Built-in high quality aluminum gear and over-voltage protect, well constructed for long-term use. It come with end limit switch that will automatically stop when the device reaches the end of stroke, Ensure the motor won't burn out..
  • Multi-Applications - 2" Stroke small linear actuators fit tight space requirement project, a great pushers used in applications such as agricultural machines and equipment, medical devices, home automation, cabinet door, robot’s gripper, deck chair, window opener, linear servo, solar tracker, extend and retract th....
Check Stock

Claw Machine for Kids,Mini Vending Machines Candy Grabber Prize Dispenser Toys for Girls, Boys Electronic Arcade Claw Game Machine for Party Birthday Easter Gifts with Lights Sound&20 Mini Plush Toys

  • ...s/snacks/mini easter eggs. This mini arcade machine features lights, sounds and music, create a real game atmosphere. What's more: volume can be adjusted or turned off.The kids claw machine can use as reward training..
  • 【Easy to Use】-To get started, please turn the switch on the back to ON position. Then, press the 60 second time limit button, move the joysticks up, right, left or down to catch your selected prize.The claw of the claw machine toys is powerful and flexible, rotating 360 degrees to easily grab the prizes..
  • 【Battery Operated or USB Charging】-Our gumball machine for kids have two power supply modes, battery power(batteries not included), you can also operate this mini arcade toy via USB cable(included). Made of high-quality ABS plastic material, safe and non-toxic. These mini arcade claw machine not easy to break, durable, and have smooth edges to ensure a safe grip for kids..
Check Stock