Mailiya 6 Port PCIe x4 SATA Card with 6 SATA Cables SATA 3.0 Controller Expansion Card Low Profile Bracket and Heatsink 6Gbps Speed None Raid Support 6 SATA 3.0 Devices
- With 6 Ports SATA card, you can add 6 SATA III 6Gbps devices to your desktop PCs, servers, and NAS system for HDD/SSD storage expansion, also 6 SATA....
- PCIe SATA III card based on ASMedia ASM1166 chip, more stable and wider compatible. you could make the system to boot from this SATA Card but non....
- Support interface: PCIe x4 lanes, support PCI-e X4/ X8/ X16 slots at the same time. Compatible with Serial ATA(SATA) Revision 3.0 specifications, auto....
- Equipped with low profile bracket can also works for mini PC, and special made heatsink will keep your device under good performance and full-load....
- The SATA expansion card works for Windows OS/MAC/NAS/Ubuntu, perfect for gaming pc and IPFS Mining Rig. Plug and play, no driver needed..
Check StockGIGABYTE LGA1151 Intel Z170 Mini-ITX DDR4 Motherboards GA-Z170N-Gaming 5
- LGA1151, Supports 6th Generation Intel Core Processors Dual Channel DDR4, 2 DIMMs.
- 11ac 867 Mbps dual band wireless connection + BLUETOOTH 4.2, Exclusive Ultra Durable Metal Shielding over the PCIe Slot.
- PCIe Gen3 x4 M.2 Connector with up to 32Gb/s Data Transfer (PCIe & SATA SSD support).
- 2 SATA Express Connectors for up to 16Gb/s Data Transfer, Mini-ITX Form Factor.
- 17.0cm x 17.0cm. Please refer the User Manual before use.
Check StockUSB3.0 to MSATA mini-SATA 30mm x 50mm Full Size SSD Portable Hard Disk Driver External Enclosure
- There are six types of interface definition,they look exactly the same,so please be sure to distinguish your solid state drive's interface definition..
- A: mSATA Solid State Drive,using SATA protocol.
- B: SATA MINI PCIE Solid State Drive,its nature is SATA interface,but the pin definition is different compared with mSATA solid State Drive.
- C: PATA MINI PCIE Solid State Drive, its nature is IDE interface.
- Connects mSATA SSD safely to computer via USB port. * Supports 30mm x 50mm mSATA SSD to USB 3.0 interface..
- Supports Plug & Play and Hot-Swapping (SSD is not include)..
- Note: If your SSD is fist time use, should be install to the Converter, then setting Management device to reformatting the SSD, only in this way can SSD be recognized by computers..
Check StockAdaptec RAID 71605 Storage Controller 2274400-R
- ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
- ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
- ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
- ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
- ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check StockDual M.2 PCIe Adapter Card for NVMe/SATA SSD - Support PCIe 3.0 x16 x8 x4 for 2280 2260 2242 2230 SSD, Compatible with Windows 7 8.1 10 and MacOS
- [Perfect Solution for Your Desktop] - NNMe pcie adapter supports M.2 NVMe/SATA SSD(One SATA interface and one PCIE x4 interface). PCIe adapter card allows to add your M.2 NVMe/SATA SSD to your desktop, perfect solution for your desktop.
- [Exclusively Designed for Speed] - Up to 32Gbps with PCI Express 3.0 x4, 3200+MB/s read and 1500+MB/s write. Up to 6Gbps with SATA, 550+MB/s read and 520+MB/s write. M.2 pcie adapter Support PCIe x4 x8 x16 slot for Windows 7/8.1/10 & MacOS.
- [Advanced Heat Dissipation Solution] - Double-sided copper hole strip porous heat dissipation structure reduce high heat generated. Making full use of the powerful performance of SSD.
- [Applicable SSD ] - M.2 nvme card Support M.2 NVME M/M+B Key or SATA NGFF B/B+M Key SSD. M.2 M Key NVMe SSD requires with PCIe slot. M.2 SATA NGFF B/B+M Key SSD requires with a SATA cable (included). Applicable to sizes 2230 2242 2260 2280 SSD.
- [What You'll Get] - 1x NVMe/SATA to PCIe adapter card, 1x Bracket, 1x Screw Kit and 1x User Manual, LED power and data transfer status..
Check Stocksmartelf PCIe X1 SATA III Card 6 Ports ASM1166 Chip, SATA 3.0 6Gbps PCIE Controller Expansion Card Adapter with 6 SATA Cables+Thin Bracket,Non Raid
- [ PCIe 6-Ports SATA 3.0 Expansion Card ] The 6-port SATA control card based on ASM1166 chip, It can add six SATA 3.0 devices (The max transport speed can reach 6Gbps ).Backward compatible with SATA 1.0 and SATA 2.0..
- [ Wide Compatibility ] Our 6-port PCIE 1X SATA 3.0 card are suitable for PCIe X1/X4/X8/X16 card slots.
- it is compatible with multiple operating systems such as Windows/ 8/10/synology/Ubuntu/Linux, and suitable for 99% of the case size on the market..
- [ High Quality PCIe SATA Card ] This 6-port PCIe SATA III controller card is non-RAID and data can be protected by the operating system. High-performance heat sink, can withstand high temperature for a long time. High-quality slots and chips increase the durability and stability of this card. The 3 upgraded FP solid capacitors make the power supply more reliable and safe..
- [ Support ACHI 1.0 Mode ] When your PC’s SSD/HDD is in AHCI boot mode, you can directly insert the hard drive into this sata card, no driver needed, just plug and play.(Note: please make sure that the PC’s SSD/HDD is in AHCI boot mode, otherwise a blue screen will be reported.).
- [ What You Get ] 1* PCIe to SATA III 6-port expansion card.
Check StockCable Matters 2-Pack 6 Pin to SATA Power Cable (SATA to 6 Pin PCIe) - 8 Inches
- PCI express video card power cable adapter connects a PCIe video card to a power supply with a spare SATA power connection.
- PSU upgrade saver power cable provides an option for a power supply without a PCIe connection as a GPU power cable.
- 6 pin PCIe to 15 PIN SATA female to male cable provides a convenient solution for low power video graphics card that can be powered from a single SATA power connection.
- Sturdy graphics card SATA to 6 pin power cable has a male SATA connector with keyed rails.
- An integrated latch on the female PCIe power cable connector prevent accidental disconnections.
- Video graphics card compatible with graphics cards such as the EVGA GeForce GTX 1080 Ti / GeForce GTX 750 Ti / GeForce 1070 Ti for a PCIe to SATA power connection.
Check StockMailiya SATA Card, 6 Ports PCIe SATA 3.0 6Gbps Expansion Controller Card with 6 SATA Cables and Heatsink, None Raid, Support 6 SATA 3.0 Devices
- Mailiya Pcie SATA III card Adopts ASMedia ASM1166 chip, the most stable Non-Raid PCIE 3.0 SATA controller solution to improve the stability and compatibility of the card..
- With 6 Ports works on one Pcie to SATA 3.0 expansion card, you are able to add 6 SATA III 6Gb/s drive for your desktop, which will be a great improvement for the computer speed, and 6 SATA cables simplify the connection..
- Plug and play, no driver needed, works on Windows, MAC OS, Linux System, and also works on Ubuntu system, perfect for IPFS mining rig..
- Compatible with Serial ATA(SATA) Revision 3.0 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on motherboard PCIE X1,X4, X8, X16 slot..
- Super heatsink is a great protect solution for your SSD, and solid capacitors for stabilizing the power supply. With LED indicates the status, leaves you no worry at all!.
Check StockAdaptec 29160 PCI to Ultra160 SCSI Card Kit with EzSCSI Software
- 1.The FS-S4-Pro is a PCI Express 3.0 X1 interface(8Gbps) to 4-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 4X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Servers, MAC Pro and Network Attached Storage (NAS)..
- 2.Selected the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
- 3. Plug and Play on Windows Server 2019, 2016 ,2012R2, 2012, 2008R2, 2008, 2003R2, 2003(32/64), Windows XP, Vista, 7, 8.x,10 (32/64bit), MAC OS 10.4.x,10.5.x,10.6.x,10.7.x,10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems..
- 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on PCIE X1, X2, X4, X8, X16 slot..
- 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 4X max SATA interface power supply for HDD/SSD. 3. Users must make sure PCs/Motherboards have at least one PCIE slot befo....
Check StockASM1166 PCIe X1 SATA Card 6 Ports, Non Raid, Joylifeboard PCIE SATA III Controller Expansion Card 6 Gbps, Support 6 SATA 3.0 Devices, PCIe SATA Card with 6 SATA Cables+Thin Bracket
- ✿【6 Ports PCIe to SATA 3.0 Expansion Card】: Six SATA 3.0 devices can be added to this PCIE 4X to SATA 3.0 card, a simple and stable solution to expand your sata storage by 6x, compliant with SATA 3 max speed 6Gbps, SATA 2 (3Gbps), SATA 1 (1.5Gbps)..
- ✿【Wide Compatibility】: This 6 Port PCIE 1X SATA card works on PCIe X1/X4/X8/X16 card slots, improve the stability and compatibility of the card.The SATA Card with 2 size profile brackets supports WinXP/7/8/10, Linux,MacOS ,Ubuntu,Synology,NAS,etc, perfect for IPFS mining rig..
- ✿【Easy to Install】: Support ACHI 1.0 mode, If the PCs SSD/HDD in AHCI boot up mode, you can insert the hard drive into this sata card directly. No need driver, plug and play. This 6-port PCIe SATA III Controller Card is non raid, data can be protected by OS..
- ✿【High Performance】: Super heatsink is long-lasting high temperature resistance. 3 solid capacitors can improve the stability of the supply. Support switch based on porter FIS or switch based on command.Chip: ASMedia+ASM1166.
- ✅【Warm Service】: 6 Indicator LEDs for each SATA channel show which HDD is active and working properly. We are committed to providing high-quality product quality and sales services. Any problem please feel free to contact us, we w....
Check StockBroadcom LSI MegaRAID 9286-8e SAS SATA ROC RAID External Storage Controller LSI00332 8 Port L5-25421-20 (Retail Pack)
- 1.The FS-S6-Pro is a PCI express 3.0 X4 interface to 6-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 6X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS)..
- 2.Select the ASMedia ASM1166 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X4 interface provide 16Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
- 3. Plug and Play on Windows Server 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 (32/64), Windows XP, Vista, 7, 8.x, 10 (32/64bit), MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X, 10.9.x, 10.10.x, 10.11.x, 10.12.x, 10.13.x, 10.14.x, 10.15.x and most of Linux kernel systems..
- 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on motherbaord PCIE X4, X8, X16 slot..
- 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 6X max SATA interface power connector.3. Users must make sure PCs/Motherboards have at least one PCIE X16....
Check StockPCIe x1 SATA Card 6 Port, SATA 3.0 Controller Expansion Card with 6 SATA Cables & Low Profile Bracket,SATA III PCIE Gen3 Adapter(6Gbps) ASM1166 Chip, Plug and Play on Windows, MAC OS, Linux System
- ✅【PCIe to SATA 3.0 6 Ports Expansion Card】The pci express sata 3.0 controller card which each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage.Our PCIE 3.0 X1 interface expansion card allows you add AHCI Boot HDD/SSD on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS)..
- ✅【High Performance PCIe SATA Card 】The 6-port SATA controller card based on ASM1166 chip offers more stable, with heat sink, long-lasting high temperature resistance.The high-quality slots and chip can improve the durability and stability of this card, at the same time, it equipped with 3 upgraded FP solid capacitors which reliable and safe power delivery..
- ✅【Wide Compatibility】Our PCIe to SATA III 6-port expansion card auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0, compatity with PCIe x1, x4, x8, x16 and support system: Windows XP / 7/8/10 / Linux,compatible with 99% size chassis on the market.Easy to install, plug and play..
- ✅【What You Get】 1 x PCI Express 6 Ports 1X Card , 6 x SATA cable, 1 x Use Manual, 1 x Low profile Bracket.We provides you with a complete set of perfect match. Note: This SATA card was set on AHCI Boot mode, make sure now PCs SSD/HDD in AHCI Boot Up mode or w....
Check StockALIKSO mSATA Mini PCIe SSD to USB3.0 External SSD Adapter with CASE Enclosure No Need USB Cable
- mSATA SSD Drives TO USB3.0 Adapter with Enclosure.
- No Support SATA MINI PCIe and PATA MINI PCIe SSD.
- Case Material:Aluminium Alloy,Size -115mm*29mm*9mm.
Check Stock