Categories

Best Mini Pressure Regulator

Cressi Sub Start Equipment for Scuba Diving, made in Italy

  • PACKAGE INCLUDES: Cressi Start BC, Cressi AC2 XS2 Regulator-Yoke, Cressi XS Octopus with Hose, Cressi Mini Two Gauge Analog Console, (Imperial).
  • START BCD: Ultra durable construction. 2 large pockets cargo pockets with velcro closure. Rigid padded backpack and carry handle. Three exhaust valves for buoyancy adjustment in any position. 2 technopolymer d-rings. 2 spring-clip holding rings. Octopus holder. Gauge holder..
  • AC2 XS2 REGULATOR: Non-balanced first stage with high performance and reliability.Downstream system. Adjustable intermediate pressure from the out side of the regulator due to our patented ACs design..
  • XS OCTOPUS: The XS second stage features a comfortable mouthpiece and an easy to purge button. Adjustable venturi effect. Easy maintenance. Jacketed Hose extremely light and flexible..
  • MINI 2 GAUGE: Pressure gauge dial is color-coded in red, green and blue for instant readability. Reads pressures to 350 bar or 5000 psi. Mini-depth gauge reads to 70 meters (230 feet). Maximum depth indicator. Luminescent face on the depth gauge.
Check Stock

Mini CO2 Gas Regular 0-30PSI Keg Charger with '' 3/8 '' Thread for Homebrew Beer Kegging by MRbrew

  • Required 3/8” thread for CO2 cartridges and a ball lock or pin lock disconnect,but not include.
  • Portable CO2 Regulartor:Made of aluminum,small and delicate design make it use in many portable regulator and without bulky CO2 gear..
  • Precise Pressure:0-30psi,this regulator is more precise than all other mini regulators and accepts most sizes of CO2 cartridges..
  • Easy to Use: Insert the CO2 cartridge,connect the ball lock or pin lock disconnect, set an appropriate pressure value and attach to your keg..
  • Application:The Mini Regulator can be used to dispense or to carbonate beverages,perfect for homebrewers to carbonate their brew and then later dispense it from their container.
Check Stock

SPARC Premium Dual Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha

  • EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly..
  • PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in both of your systems via a control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines..
  • VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types..
  • HEAVY DUTY WITH TRIPLE GAUGES: SPARC 2 Stage CO2 Pressure Regulator is a heavy duty piece made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure..
  • WARRANTY: SPARC 2 Year USA Warranty. Call us with any problems!.
Check Stock

LE Lematec AR-01 Air Compressor Regulator ¼ NPT. Air Pressure Regulator 0-150 PSI

  • Precisely Control and Regulate Airflow. The AR-01 HVLP Regulator gives you the precise control and regulation of airflow that is necessary to prevent overspray and loss of materials..
  • High Impact Housing Air Regulator is built to last. With heavy duty materials, it will handle the most extreme shop applications..
  • The LE LEMATEC Spray Gun Regulator is equipped with a Universal 1/4" NPT for more flexible air compressor and compressor tool applications..
  • 89 SCFM Pressure Regulator. More practical for medium to large size jobs. This regulator is designed to provide a consistent and stable flow of air, making it perfect for a variety of applications..
  • Operating Range 0-150 PSI. This mini air regulator is designed to be used in a wide range of applications, including inflating tires, powering pneumatic tools, and much more..
Check Stock

SPARC Premium CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha

  • HEAVY DUTY WITH DUAL GAUGES ✔ Heavy duty unit made with dual gauges to accurately measure working pressure in the system and CO2 tank pressure.....
  • PROFESSIONAL GRADE ✔ Our CO2 Regulator fits all standard CO2 tanks with CGA-320 outlets. You can adjust the working pressure in your system via a....
  • EASY INSTALLATION ✔ All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always....
  • VERSATILE APPLICATIONS ✔ Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed gas outlet....
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer....
Check Stock

G Francis Keg with Keg Regulator and Beer Dispenser, 128 oz – Portable Keg Draft Beer Dispenser, Portable Beer Dispenser

  • ...ps contaminants out, carbonation in, eliminates foam, and preserves coldness longer than breakable glass growler alternatives.
  • EASY TO USE: Assembly required and instructions included.
  • Remove cap, screw on top tap (with foam blocker in tab) on mini keg, screw in a 16 gram CO2 cartridge (not included), turn the flow regulator to your desired PSI, pull the tap, and let the beer flow into your glass.
  • When done for the night, simply turn the regulator off, leave the mini keg pressurized to preserve the beer and prevent it from going flat, and place in fridge or cooler.
  • PACKAGE CONTENTS: Mini beer keg with regulator and dispenser kit comes complete with a spear body, crossbar, twist tube, pressure relief ring, nut, white flow-control block, faucet, faucet knob, regulator, regulator base, regulator knob, gauge, and beer hose.
  • 16g CO2 capsule and CO2 cartridges not included.
  • For best results, use beverage grade CO2 cartridges (not all CO2 cartridges are made to be suitable for beverages).
  • Included O-rings are extras, not for initial assembly.
Check Stock

Pressurized Beer Mini Keg System - 64oz Stainless Steel Growler Tap, Portable Mini Keg Dispenser Kegerator Kit, Co2 Pressure Regulator Keeps Carbonation for Craft Beer, Draft and Homebrew - NutriChef

  • ...eel. Tap faucet handle is just pouring draft brew from a kegerator. Pressure release valve allows safe removal of the tap hardware.
  • WORKS W/ DISPOSABLE CO2: Each cartridge will pump around 128oz of beer before depleting Co2 cartridges not included. Screw universal threaded 16g CO2 gas cartridges (any brand) into the regulator to supply pressurized carbonation to your keg system.
  • UPGRADED REGULATOR: Monitor the mini keg growler's current PSI from the regulator gauge and fine tune pressure by rotating the adjustment knob to enjoy a perfect head on every beer. Add the insulator sleeve to keep beer coolerDescriptionNutriChef Model : PKBRTP50.5Homebrew Mini Keg - Stainless Steel CO2 Home Keg Dispenser System (64 oz.) Features:Compact & Portable Mini Keg SystemHomebrew CO2 System Keeps Carbonated Beverages Fresh All DayIncludes All Necessary Installation Components & HardwareSolid Stainless Steel Construction Keep Beverage Colder, LongerMade of Food Grade S/S 304 Rust Proof Stainless Steel Easy to Assemble - Easy to Fill - Easy to Clean Whats in the Box:Stainless Steel KegBrass TapAssembly HardwareNeoprene Koozie Technical Specs:Keg Liquid Volume Capacity: 64 oz.CO2 System: 30 PSI, Safety Pressure RegulatedStandard Threaded CO2 Cartridge Compatibility (Not i....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...of 1L, and can be used for 340 times underwater breath when full inflated, it’s about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank’s inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • ✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valv....
Check Stock

Boltigen Upgrade Handle Adjustable RV Water Pressure Regulator Valve, Brass Lead-Free Reducer with Gauge 160PSI and 4 Inlet Screened Filters,for RV Camper, Travel Trailer, or Garden…

  • 【Adjustable Handwheel Design】The rv water pressure regulator valve designed with handle adjustment. Compared with the old RV water pressure regulator valve, this upgrade brass Lead-Free handle adjustable water pressure reducer is more convenient use and operation. Adjustable handle for easy pressure adjustment without any tools. Handle adjustable water pressure regulator for rv camper and travel trailer.
  • 【Product Standard】Maximum Regulator gauge rang 0-160 psi, water pressure setting can be easily adjusted by turning handwheel. Turn clockwise to increase pressure, turn counterclockwise to decrease pressure. And the adjustable rv water pressure regulator's size standard: 3/4" hose female inlet and 3/4" hose male outlet, fits for garden hose & 3/4" NH,compatible with America almost all water system.
  • 【No Lead-Free Material】The adjustable rv water pressure regulator valve is made of C46500 lead-free brass, manufactured by hot casting process technology. Our every adjustable rv water regulator is tested to contain less than 0.13% lead, well under the NSF lead-free requirements of 0.25%, safe and healthy for drinking system.
  • 【Adjustable RV Water Pressure Regulator Kit】The rv water pressure regulator valve kit comes with 1 adjustable rv water r....
Check Stock

Primula Burke Cold Brew Coffee Maker 1.6 Qt Capacity

  • ADJUSTABLE PRESSURE REGULATOR: Features a stout creamer faucet w/ adjustable pressure regulator where cold-brew coffee infused w/ nitrogen gas is released creating a creamy, stout-like effect just like brewed coffee at your local coffee shop.
  • SMOOTH & RICHER COFFEE: The Nitro Cold Brew Coffee Maker is designed after stout beer dispenser that creates a super-smooth, rich body w/ foamy top similar to your favorite draught beer. Enjoy a frothy iced coffee w/o the need of creamer or sweetener.
  • 64 OZ. CAPACITY: The nitro keg coffee growler features a 64 oz. standard liquid volume capacity which is similar to those traditional beer growlers. Total size measures 7.3” x 7.5” x 14.2” inches and easily fits in your home fridge or mini kegerator.
  • STAINLESS STEEL: The nitro cold brew at home is constructed w/ food grade rust-proof stainless steel w/ black powder coating. Its stainless steel construction keeps your beverage cold for a longer period of time, and is easy to assemble, fill & clean.
  • COMPLETE BREWING KIT: Includes stout faucet, spear w/ pressure-relieving valve 75PSI, N20/N2 cartridge holder, tap handle, CO2 regulator w/ 100PSI range, silicone hose & O-ring set. Hexagonal screw cap is made easy to grip. Ideal for parties/camping.
Check Stock

TMCRAFT 128oz Mini Keg Growler Pressurized Stainless Steel Home Keg Kit System with Updated Co2 Regulator Keeps Fresh and Carbonation for Homebrew Craft and Draft Beer

  • 128OZ CAPACITY: Portable size is easy to transportation and storage. Measures 7.3"L x 5.3"W x 18.3"H & fits your home cooler/fridge.
  • STAINLESS STEEL MATERIAL: The mini keg tap dispenser kit is constructed w/ solid food grade stainless steel which keeps beer flavors and fresh,....
  • UPGRADED REGULATOR: Monitor the mini keg growler‘s current PSI from the regulator gauge more accurately and fine tune pressure by rotating the....
  • CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges（3/8" Thread）into the regulator to maintains perfect carbonation. 16g capsule can tap 128OZ of beer.....
  • ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...y of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices.
  • ✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve an....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...y of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • PERFECT COMPATIBILITY : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. Wh....
Check Stock