Categories

Best Miniature Servo Motors

2-Pack Metal Aluminum 25T Servo Horn Steering Arms for 1/10 1/8 Scale RC Trucks Cars Buggies Airplane Replacement Upgrade Parts Blue

  • Compatible with:25T Spline & M3 threads,Compatible with Mostly Standard Servo Motors for HSP,Power HD,Futaba, Axial ,Savox ,Xcore, MG995 MG996R MG946R....
  • The Double Arms：47x10x7.5mm (Hole centers at 12 and 20mm from the servo output.).
  • The Short Arm：28x10x7.5mm(Hole centers at 12 and 20mm from the servo output.).
  • Spare part:The RC 25T Servo Horn Steering Arms Easy and convenient to install and remove.Better than most of the plastic material..
Check Stock

Aluminum Long 25T Servo Horn w/5 Mounting Holes for Futaba Savox Servo,2-Pack

  • 24T Spline & M3 threads,Compatible with Hitec Servo Motors.
  • Aluminum CNC machined for precision,anodized finish.
  • Includes two steel bolts to secure the split-clamp onto the servo output.
  • Dimension:35x15x6mm (Hole centers at 20 and 24mm from the servo output.).
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

10PCS ShareGoo 25T Aluminum Servo Horns Arms M3 Threads Metal Steering Arm for RC Car Truck Buggy Airplane-Red

  • Suitable for MOSTLY 25T Standard Servo Motor.For example,Compatible with Towerpro,HSP,HD power,Futaba, Axial ,Savox,Xcore,Standard Servos Motors, MG995 MG996R MG946R ,S3003 etc servo.
  • Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
  • Hard aluminum construction for precision and durability..
  • For RC Scale Type: for RC buggy, rc car, rc truck, rc truggy.
  • Better than most of the plastic material,Pack of 10.
Check Stock

Hobbypark Aluminum Servo Horn 25T Steering Arm Upgrades for Traxxas 1/10 Scale RC Crawler Car,Replacement of 8247X (Red-Black)

  • Replace 8247X, 25T Spline & M3 threads, Compatible with Traxxas 1/10 Crawler Car,fit Mostly Standard Servo Motors,Such as Futaba, Power HD,Axial,Savox ,Xcore, HSP, TowerPro MG JX DS3218MG Servo Motors and So on..
  • 2 Mounting Positions - 18mm & 22mm (Measured From Hole Center To Hole Center).
  • Aluminum CNC machined for precision,Anodized,Easy upgrade from the original part.
  • 100% New, Genuine HobbyPark RC Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service..
Check Stock

Heyiarbeit 5pcs 4mm to 4mm 2 Section Rotatable Universal Joint Coupling Shaft Stepper Motor L52xD12 U Joint Coupler Connector with Screw for RC Model Motor, RC Robot, DIY Encoder, CNC Machine

  • [Total Size] - Outer Diameter: 12mm / 0.47".
  • Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
  • [Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
  • [Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
  • [Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
  • [Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
  • Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.
Check Stock

Hobbypark 5-Pack M3 25T Aluminum Metal Servo Horn for Futaba Savox Xcore HL HSP HD Servo Motors

  • 25T Spline & M3 threads Compatible with Mostly Standard Servo Motors.
  • Aluminum CNC machined for precision,anodized finish.
  • Includes two steel bolts to secure the split-clamp onto the servo output.
  • Dimension:35x15x6mm (Hole centers at 20 and 24mm from the servo output.).
Check Stock

Adeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

Adeept AD002 2 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

ALAMSCN 5PCS SG90 9g Servo Motor + 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit DIY Kit for RC Robot Arm Helicopter Airplane Car Boat Remote Control for Arduino for Raspberry pi

  • These SG90 9G micro servo motors have a completely new redesigned PCB and control system to provide more accuracy..
  • Its internal gearing and motor are also upgraded to improve dead bandwidth and centering..
  • For SG90 9G micro servo motor is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering..
  • Apply to remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi..
  • Package includes: 5PCS SG90 9g Micro Servo + 1PC PWM Servo Motor Driver. Cost-effective kit to meet your DIY needs..
Check Stock

2 Pieces MG90S 9g Micro Servo RC Servos for Planes MG90S Digital Servo Aluminum Alloy SG90 Micro Servos Metal Gear for Smart Robot Car Helicopter Plane Boat Vehicle Models

  • Package includes: the package 2 pieces of mini servo metal gears with model MG90S, which can replace SG90 for better noise suppression and durability.
  • Detailed size: the servo motor 9g has a size of 22.8 x 12.2 x 28.5 mm/ 0.9 x 0.5 x 1.1 inch, a weight of 13.6g, an operating torque of 2.0KG/ cm, a....
  • Wiring: dark gray: GND, red: VCC 4.8-7.2V, orange: pulse input, interface type: JR/FUTABA general.
  • You can give this digital servo motor to your....
  • Robust structure: the metal micro servo is composed of aluminum metal teeth, coreless motors, and double ball bearings, which is strong, reliable and....
  • Wide application: the metal gear servo micro can be compatible with 450 E-sky, swashplate steering gear, fixed wing, helicopter KT, flapping wing,....
Check Stock

Foredom Hand Piece #44Ht

  • Size: 2cm x 2cm x 2.5cm / 0.79inch x 0.79inch x 0.98inch. Diameter 20MM, length 25MM, apertures at both ends are 5MM and 8MM respectively.
  • Flexible Couplings made of premium aluminum alloy material, exquisite workmanship, bright appearance, good toughness..
  • It has the function of buffering, damping and improving the dynamic performance of the shaft series..
  • This high-quality rod coupler is widely used to connect servo motors, stepping motors, encoders, screw drives, mechanical platforms, etc..
  • Package included: 1 X Shaft Coupler Diameter 5mm to 8mm.
Check Stock

Futaba BLS177SV S.Bus2 HV Ultra Torq Prog All Metal Case Servo

  • FEATURES: Brushless motor offers incredible holding power and 5X longer life than servos equipped with brushed motors Ultra high torque Handles.
  • INCLUDES: HV BLS177SV UHT S.Bus2 Servo with Instructions and Mounting Hardware 0.83 (21mm) diameter Round Horn 1.8 (45mm) diameter Round Horn 1.52.
Check Stock