Categories

Best Miniature Thrust Bearing

General Motors 12643668, Engine Crankshaft Thrust Washer

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-678S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

Clevite TW-473S Engine Crankshaft Thrust Washer Set

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

3575169 Turbocharger Rebuild kit for Holset HX35 HX35W HY35 HX40 HE351 HE351CW

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fit for Holset HX35 HX35W HY35 HX40 HE341 HE351 & HE351CW turbochargers.
  • ★Improved thrust bearing with large diameter oil feed holes.
  • Complete gasket set included. including 28 quality components.
  • ★Commons Vehicles With This Turbo: for Dodge Ram Cummins Turbo Deisel.
  • ★This kit includes: Machined from Copper Bar Upgraded Thrust Bearing 2 Journal Bearings 4 C-Clips to Hold in the Bearings 1 Thrust Collar 1 Thrust....
Check Stock

Bettomshin 2Pcs 51100 Thrust Ball Bearings with Washers 10mm Bore 24mm OD 9mm Width GCr15 Thrust Bearing for Wind Spinners Slicers CNC Retrofits

  • 【Parameter】Type: Thrust Ball Bearing.
  • 【Material】Made of GCr15, durability and resistance to deformity under loads, have great wear-resistant, high temperature resistance and high hardness..
  • 【Capability】High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads. They incorporate logarithmic roller and raceway profiles with a optimized surface finish for ultimate roller to flange contact..
  • 【Features】The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain. Keep the bearing working environment clean and bearing lubricated in time..
  • 【Applications】Can be used for jack, pump, rotating applications, machine tools ect..
Check Stock

XMHF 51203 Thrust Bearing 17x35x12mm Thrust Single Ball Row Bearings 3Pcs

  • Dimensions: 17mm x 35mm x 12mm/0.67”x1.4”x0.47”.
  • Package Content: 3 x Thrust Ball Bearing.
Check Stock

Rannb 51202 Thrust Ball Bearing Axial Ball Thrust Ball Bearings 12mm x 32mm x 15mm - Pack of 3

  • 【Material】The 51202 Thrust Ball Bearing is made of Chromium Steel (GCr15),durability and resistance to deformity under loads..
  • 【Dimension】Bore Diameter : 15mm/0.59".
  • 【Application】Designed for low speed operation and axial loads only..
  • 【Easy to Use】The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections..
  • 【Package Content】3pcs x 51202 Thrust Ball Bearing.
Check Stock

XMHF 4pcs 51204 Carbon Steel Axial Thrust Ball Bearing 20mm x 40mm x 14mm

  • Package Content : 4x Thrust Ball Bearing.
Check Stock

PULSAR 6.6 Duramax LLY Turbo Rebuild Kit Billet Compressor Wheel 2004.5-2005

  • 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible,Spool up faster, Lower EGTs and More Boost!.
  • 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability..
  • Fits 2004.5-2005 Chevy/GM 6.6L Duramax LLY Garrett GT3788VA Turbo ONLY.
  • BE AWARE this compressor wheel doesn't fit LB7 LBZ turbos.
Check Stock

DNJ TW500 Thrust Washer For 85-01 Chevrolet, Suzuki, Geo, Metro, Swift, Samurai, Sidekick, Sprint,1.0L-1.3L, L4, L3, SOHC, DOHC, Naturally Aspirated, Turbocharged

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

PULSAR 03-07 6.0 Turbo Rebuild Kit 6.6 Duramax LLY LBZ Staggered Step Gap Seals

  • 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability..
  • Staggered step gap compressor and turbine ends seal rings reduce oil blow by of the seals.
  • Fits 2003-2007 Ford 6.0L Diesel F250 F350 F450 F550 GT3782VA turbo.
  • Fits 2004.5-2007 GMC/Chevy 6.6L Duramax LLY LBZ Silverado Sierra HD GT3788VA.
Check Stock

DNJ TW950 Thrust Washer For 88-04 Toyota, Lexus, Tacoma, Tundra, 4Runner, T100, Pickup, ES300, Camry, ES250, 2.5L-3.4L V6, DOHC, SOHC, Naturally Aspirated

  • Thrust washers limit axial movement and provide a bearing surface. Thrust bearings are designed to support axial load..
  • Thrust washers either have multiple tapered ramps and relatively small flat pads or have curved surfaces that follow a sine wave contour around their circumference..
  • Tear-drop or through grooves on the flange faces and wedge shaped ramps at each parting line allow engine oil to enter between the shaft and bearing surfaces..
  • Manufactured to meet or exceed OE specifications.
Check Stock