Categories

Best Mining Pool For Dogecoin

Antminer L3+ 504MH/S Litecoin Miner, Professional ASIC Litecoin Dogecoin Mining Machine, Scrypt Algorithm LTC Miner & Dogecoin Miner

  • Litecoin Miner: L3+ is a dual-coin merged miner of Litecoin & Dogecoin. Has high computing power and efficiency: 504 MH/s (expected to fluctuate +/- 5%), Power consumption 800W+10%. Dimensions 8.66 x 18.11 x 11.02 inches.
  • Durable: This Scrypt Litecoin Miner has a built-in controller, and no separate host is required for operation. The chassis is made of premium aluminum alloy material, which is integrated and durable. With dual fans and independent heat sinks, the heat dissipation effect is good.
  • Stable: This LTC Dogecoin Mining Machine has a tight industrial power interface, which can be closely contacted and fitted to ensure long-term and stable output of power.
  • Note: The power consumption efficiency of the Scrypt ASIC Litecoin Miner will vary depending on the PSU, ambient operating temperature and the accuracy of the power meter. Please be careful to avoid dust and catkins, so that the heat of the ASIC Miner cannot be dissipated.
  • Equipment Condition: Our L3+ Litecoin Mining Machine is in good condition, dust free, used but like new. We will wipe, clean and debug them before shipping to make sure they work properly. If you encounter any problems, please contact our team in time.
Check Stock

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock

Foyozisun GPU Mining Rig Complete System Ethereum ETC Crypto Miner with 8 GPU Mining Motherboard and 1800W Power Supply 8G RAM (Without GPU)

  • Mining Rig Complete System: Stackable open frame Complete System, Specially designed for crypto mining -ETH,ETC,FLUX,REGO,Ravencoin,Monero, Dogecoin, etc.supports Win10, Linux, hiveos (spark), nicehash, minero (os) and other operating systems..
  • 8 GPU Mining Motherboard: Intel-B85 mining motherboard.The 65mm distance gives the GPU enough space for air circulation, suitable for RTX3060, 3070, 3080, 3090, 6600, 6700, 1660s/2060 and other AMD/NVIDIA GPUs..
  • 1800w Quiet Supply Power: Both 110V and 220V can be used. easy to setup and very quiet..
  • Arrived fast : We ship from the amazon FBA warehouse in thEasy&Fast installation in 30 minutes with video detailed guide.Instant gratification!.
  • GPU Mining rig Including :B85 motherboard, 1800W Supply Power , CPU,128GB mSATA SSD, 8G DDR 3, 3000 rpm cooling fan * 4. win10 system (not activated) Without GPU. For any questions, please feel free to contact us.We will provide professional technical support..
Check Stock

8 GPU Mining Rig 68mm Slots, Crypto Ethereum Miner Frame with Barebone Motherboard for ETH/ZEC, Cryptocurrency Machine System Case with SSD/RAM (Without GPU/PSU)

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【4 Fans Support】 The mining rig case is equipped with 4pcs 3000rpm cooling fans, which can provide airflow allowing for assistive GPU cooling..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to contact me and we will provide you with technical support..
  • 【Mining rig case package】 Including: motherboard, Intel CPU, 12....
Check Stock

VTRETU GPU Mining Rig， Ethereum Classic Crypto Miner ，with 8 GPU Mining Motherboard and 2000W Power Supply（110-264V） 8 Cooling Fans ，SSD,RAM，CPU,Windows 10(Excluding GPU) White

  • 【VTRETU Complete Crypto Mining Rig 】: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining –Monero, Ethereum,ETC, Ripple, Zerocoin, Litecoin ，Dogecoin ，etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
  • 【Adapt to universal voltage 】: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90% conversion efficiency. 110V – 264V universal AC input design， supports 8 GPU to work at the same time， allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
  • 【8 GPU Mining Motherboard】: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • 【8 Powerful Fans 】 : This mining rig case is equipped 8*4500rpm cooling fan, 4 (Air in) + 4 (Air out),so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard an....
Check Stock

VTRETU Ethereum GPU Mining Rig with 8 GPU Mining Motherboard and 2000W Power Supply110-264V 8 Cooling Fans for Crypto Mining Rig Complete ETH Miner (Excluding GPU), black (V01)

  • ?VTRETU Complete Crypto Mining Rig ?: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining -Monero, Ethereum, Ripple, Zerocoin, Litecoin ,Dogecoin ,etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
  • ?Adapt to universal voltage ?: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90 percent conversion efficiency. 110V - 264V universal AC input design, supports 8 GPU to work at the same time, allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
  • ?8 GPU Mining Motherboard?: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
  • ?8 Powerful Fans ? : This mining rig case is equipped 8 x 4500rpm cooling fan, so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.
Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Check Stock

HUAXUCHENG BTC-X79-5 Card GPU Full Mining Machine Used to Build The Mining System of Bitcoin Mining Machine and GPU Mining Machine Including Motherboard CPU SSD RAM.PSU Mining Machine

  • Please note: BTC-X79-5 card miner includes: Intel CPU, 128GB SSD, 4G memory, 1800W power supply (super static power supply), fan (silent fan), frame,....
  • The 3060 graphics card has a single card computing power of up to 48MH/s or more, which perfectly supports graphics card mining ETH, which greatly....
  • The motherboard of the BTC-X79-5 card mining machine adopts the H61 chip and a single channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU port....
  • If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
  • Designed specifically for cryptocurrency mining-Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin, etc. When the BTC-X79-5 card mining machine is....
Check Stock

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
  • 【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
  • 【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
  • 【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
  • 【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..
Check Stock

HUAXUCHENG BTC-X79-5 Card Mining Machine Motherboard, 5 PCI-E 3.0 Graphics Slot with 4GB ddr3 128GB MSATA, Support 3060 GPU Mining Rig (Mining rig(8GB RAM))

  • ...cie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. When using hiveos to start, enter the BIOS to set the U disk to start, wait for 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
  • ❤ Specially designed for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin and more. The noise of the BTC-X79-5 card mining machine is about 55db when running. It runs very quietly and is perfect for home use..
  • ❤ If you want to use other CPU, please use the CPU below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
  • ❤Please note: Please connect the power supply to the 6pin of motherboard 1.3.6 for power supply to the motherboard. Please connect the fifth GPU to the monitor. Please contact us when the black screen appears..
Check Stock

Antminer L3++ Litecoin Miner 580MH/S ASIC Miner Scrypt Litecoin Mining Machine Professional LTC Dogecoin Miner Machine

  • Mineable Coins: Our L3++ 580MH/S Litecoin miner is able to mine any coin based on the Scrypt algorithm. There are many coins, but the most famous is Litecoin..
  • High Quality: Our LTC Mining Machine has an aluminum alloy casing, which is sturdy and durable, with front and rear dual cooling fans, independent heat sinks, and good heat dissipation..
  • Stability: The interface of our L3++ Litecoin Dogecoin Miner adopts a snap-on design with close contact, which is conducive to the stability and durability of data transmission..
  • Easy to Use: Our L3++ Scrypt Litecoin Miner do not require a separate host to operate, and are simple to set up and easy to operate..
  • Note: Like New. We will debug the LTC Dogecoin Miner Machine before shipping to make sure it works properly. If you have any questions or need to buy in bulk, please contact us..
Check Stock

Vintage Dogecoin Miner DogeCoin T-Shirt

  • Do you invest in Dogecoin? Buy this vintage Dogecoin Miner logo tee to show your love to cryptocurrencies and Dogecoin..
  • This gift is perfect for your husband, fathers, brothers, family, friends who love Dogecoin on special occasions such as birthday, father's day, Christmas, New Year, Fourth of July. It is also great for people who are Dogecoin Investors, Dogecoin Miners..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

  • ...ocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 5 USB ports. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【Mining rig package】 Note: Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU/PSU from overheating. Including: motherboard, CPU, power cord, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't come with GPU..
Check Stock