Mikrotik BaseBox 2 Power Over Ethernet (PoE) Grey WLAN Access Point
- The BaseBox2 also known as RB912UAG-2HPnD-OUT is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture.
- Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
- The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.
- Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
- PoE in: Passive PoE, Wireless 2.4 GHz number of chains: 2, Wireless 2.4 GHz standards: 802.11b/g/n, 10/100/1000 Ethernet ports: 1, Number of SIM slots: 1 Modem (Mini SIM), MiniPCI-e slots: 1, Number of USB ports: 1.
Check Stock
LEAGY PTI8 Laptop PC & Computer PCI Motherboard Diagnostic Tester Analyzer Post Card
- ✔ PC LCD post test card Professional Version PTI8 is the 2011 lastest computer repair tool, this professional version has all the advantages of Accurate PTI6, while it has upgraded the chip solution, adapting three-level menu operation, adding hundreds of diagnostic codes (from authoritative institution)..
- ✔ PTI8 could offer real-time monitoring on the voltage, and the professional function like key signal monitoring. With unique MutiPost technology,Pti8 is able to monitor most POST interface of most motherboard, and it is compatible with most of the popular motherboards.
- ✔ Pti8 has MINIPCIE, MINIPCI, LPC these three interfaces of notebook PC, which makes it new generation motherboards LCD Post Card that is compatible with both desktop and notebook PC. PTI8 is a indispensable tool for computer repair personals..
- ✔ It supports Desktop PCI interface and laptop Mini PCI-E interface,Comprehensively compatible all motherboards' PCI socket. Passed the strict test for 9 kinds of Asus mainstream motherboards, cover INTEL and AMD mainstream products..
- ✔ The compatibility also passed the test for a series of motherboards of INTEL 815,INTEL 845,INTEL 865,INTEL 915,INTEL 945 INTEL 965 ATI SB600,ATI Xpress 200,ATI Xpress 1100,AMD 480X chipset..
Check Stock
03 Laptop Diagnostic Tester, New Generation Tablet PCI Motherboard Analyzer, Comprehensively Compatible for PC Laptop Desktop PTI8 Computer Repair Personals
- EXCELLENT COMPUTER REPAIR TOOL--PC LCD post test card Professional Version PTI8 is the 2011 latest computer repair tool, this professional version has all the advantages of Accurate PTI6, while it has upgraded the chip solution, adapting three-level menu operation, adding hundreds of diagnostic codes (from authoritative institution)..
- REAL TIME MONITORING--PTI8 could offer real-time monitoring on the voltage, and the professional function like key signal monitoring..
- COMPATIBILITY--PTI8 is able to monitor most POST interface of most motherboard, and it is compatible with most of the popular motherboards。.
- UNIQUE MutiPost TECHNOLOGY--Pti8 has MINIPCIE, MINIPCI, LPC these three interfaces of notebook PC, which makes it new generation..
- 100% CUSTOMER SATISFACTION GUARANTEE--In the off chance that you're not completely satisfied with Laptop Diagnostic Tester, return it for a FULL REFUND! Please free to contact us, if you have some questions about this product We are always available to help our customers..
Check Stock
Case Compatible with Samsung T7 Shield/ T7/ T7 Touch Portable Solid State Drive USB 3.2 500GB 1TB 2TB, External Hard Drive Storage Carrying Holder Fits for Samsung SSD & USB Cables (Box only)-Blue
- External ssd protective case: For samsung t7 ssd 2tb case is specially tailored for SAMSUNG T7 Shield hard drive, the size is very suitable for samsung t7 ssd. In addition, ssd external hard drive bag is also compatible with SAMSUNG T7/ T7 Touch/ T5 ssd, protecting for Samsung T7 portable ssd from damage, keep them in new condition. (For samsung external ssd case only, ssd external not included).
- External hard drive ssd case with premium material: For samsung ssd external holder is made of high-quality hard EVA, which is shock-proof. Protect your expensive 1tb ssd external from scratches, dents, bumps and drops, keep your for samsung portable ssd in perfect condition when traveling or outdoors, and make your 1tb ssd external hard drive more stable and secure. 360 degree rigid and smooth zipper, easy to open and close..
- For samsung external hard drive carrying case with double protection: Portable ssd 1tb case is equipped with a particle separator, which can prevent the accessories from damaging external ssd 1tb to protect for samsung ssd t7, and elastic bandage fix for samsung t7 2tb to ensure the stability of 1tb external ssd portable hard drive ssd and preven....
Check Stock
USB C 3.2 Gen2 MacBook SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro MacBook Air Mac Pro iMac from 2013 to 2017, with Adapter to Support M.2 NVMe SSDs (PCIe NVME/PCIe AHCI Protocol)
- [Upgraded MacBook SSD Enclosure] The USB C 3.2 SSD enclosure works well for all Apple original Mac SSDs with 12+16 Pins. Compatible with Toshiba and OWC brand SSDs. Also support M.2 NVMe SSDs with an enclosure interface adapter..
- [2022 Latest High Speed Chip] Support PCIe NVMe protocol / PCIe AHCI protocol SSD, better work efficiency and more secure data protection. USB 3.2 Gen 2 Macbook air ssd enclosure is compatible for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro. Compatible with Windows, Mac OS, Linux, iOS..
- [Faster Data Transmission] Macbook pro ssd enclosure with USB 3.2 Gen2 interface, the transmission speed is 10Gbps(USB-C to USB-A). It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2.(USB-C to USB-C). Downward compatibility with USB 3.1 gen2, USB 3.0, USB 2.0. It only takes a few seconds to save and transfer files..
- [SSD Installation Steps] Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the ssd enclosure. Align the ssd with the card slot on the ssd base and gently push it in. Tighten the screws with a screwdriver to fix the ssd on the ssd base. Tighten the 4 fixing screws on the cover with a screwdriver, and the installation of the ssd is completed. ❤N....
Check StockGLOTRENDS M.2 Heatsink and Desktop PC Installation Fit for 2280 M.2 PCIe 4.0/3.0 NVMe SSD
- M.2 heatsink cooler fits for Desktop PC installation. 0.4inch/10mm high m.2 heatsink..
- Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent....
- Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long....
- 10°C- 30°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink....
- A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low....
Check Stock
GLOTRENDS M.2 Heatsink with M.2 Thermal Pad for 2280 M.2 PCIe 4.0/3.0 NVMe SSD (2 Packs)
- 2 packs of M.2 heatsink fits for PS5/PC installation. 0.12inch/3mm high m.2 heatsink well fit for PS5 installation as well as PC M.2 Slot..
- Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent Rocket 4, Samsung 980 Pro, Samsung 970 Pro, Silicon Power US70, and etc..
- Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation..
- 5°C- 20°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink can extend the life of M.2 PCIe SSD..
- A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low viscosity, thermal conductivity, and insulation..
Check Stock
ZEXMTE M.2 NGFF or mSATA to USB 3.0 Adapter 2-in-1 NGFF or mSATA Converter Reader Card with SATA Cable Converter as Portable Flash Drive External 2.5 inch Hard Drive,Support SATA NGFF B/B+M Key SSD
- 【Pls Note】 Support M.2 NGFF SATA SSD and mSATA SSD. DO NOT support M.2 NVMe SSD, Pls check your M.2 SSD type before place order.
- 【Exclusively Designed for M.2 SATA/mSATA SSD】2 in 1 Combo M.2 NGFF SATA SSD and mSATA SSD to USB Adapter Converter. Support Super-Speed SATAIII/6Gbps interface. Used as a USB flash drive to expand your external storage space for your Laptops or desktop computers.
- 【Applicable SSD】Fit for M.2 SATA B-key or B+M-key SSD(2230 2242 2260 2280) and full/half size mSATA SSD(30mmx50mm 30mmx30mm). One SSD can be identified at a time.
- 【Plug and Play 】Hot swap, plug and play, no driver need. Compable with Windows XP/Vista/7/8/10 & MACOS. Toggle switch model design, you could easily adjust the SSD's switch to NGFF model or MSATA model.
- 【 Included 】The item included one USB to SATA cable and one 2-in-1 combo Converter, a perfect solution for data transfer or data backup. We offer 24-month friendly customer service and if any question you have, please free contact us.
Check Stock
USB C 3.2 MacBook SSD Enclosure for 12+16 PIN MacBook Air/Pro SSD, Aluminum M.2 NVMe MacBook Pro Enclosure Adapter Support MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017
- ⚡⚡【Designed for MacBook】USB 3.2 Gen 2 Apple ssd enclosure compatible with 12+16 PIN MacBook Air/Pro SSD, also compatible with Toshiba MacBook SSD/Toshiba MacBook SSD 656-0021A and OWC Macbook SSD, compatible with 2013/2014/2015/2016/2017 MacBook Air Retina/Macbook Pro/IMac, equipped with adapter to support M.2 NVMe SSDs..
- ⚡⚡【Extremely Fast Data Transfer】Macbook pro ssd enclosure is equipped with USB 3.2 Gen 2 interface, the average transmission speed is 10Gbps, USB 3.2 Gen 2 nvme ssd enclosure can also reach 20Gbps through USB 3.2 Gen2x2, which is very suitable for transmitting large files, and it only takes a few seconds to complete large files. save and transfer..
- ⚡⚡【Advanced Heat Dissipation Technology】Macbook ssd enclosure adopts aluminum alloy design, which has better thermal conductivity than traditional ABS material. At the same time, the shell is designed in a fish scale shape, which expands the thermal conduction area, improves the thermal conduction effect, and is easier to hold..
- ⚡⚡【Compatible Systems】USB 3.2 Gen 2 Macbook air ssd enclosure is compatible with Windows7/8/10/11, Mac OS 10.0, Linux 2.6 or later. Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro..
Check Stock
ORICO M.2 SATA B+M/B Key SSD Enclosure USB 3.1 Type C 5Gbps External Solid State Enclosure Adapter for 2280/2260/2242/2230 M.2 NGFF SSD 4TB Max, NOT Supoort PCIe NVMe/AHCI M.2 SSD -M2PF
- Up to 5Gbps with UASP: ORICO M.2 NGFF ssd external case adopts control chip, with UASP acceleration protocol and USB3.1 Type-C output interface, reach up to 440+ MB/S write/read speed matched with your M.2 SATA SSD..
- NGFF SSD Enclosure: Compatible with most M.2 SSD SATA based 2280/2260/2242/2230 B Key M.2 NGFF SSD up to 2TB such as Samsung 860 EVO / 850 EVO M.2 SATA III SSD, WD Green M.2 2280, etc..
- Compatibility: Supports Window / Mac / Linux . This external hard drive case is suitable for connecting PC, smart phone, notebook computer, smart TV, smart router, PS4 and other devices. Plug and play, no driver needed..
- Excellent Heat Dissipation: The copper bars with holes on the PCBA board rapidly radiating heat from internal SSD to external Aluminum case. The external case with heat exchange fin, for better heat dissipation under high-speed transmission..
- More details: The LED indicator on nvme ssd enclosure shows working status of SSD. The lightweight and compact size making it easy to carry with you while on the go. NOTE: 【DOES NOT SUPPORT NVMe PCIe BASED M-Key and M&B-Key M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.】.
Check Stock
QNINE PCIe SSD Adapter Card for 2013 2014 2015 2016 2017 MacBook Air Pro Retina, Hard Drive Controller Converter to Desktop PCI Express X4, Support Model A1465 A1466 A1398 A1502
- The PCIe x4 adapter only support x4/ x8/ x16 pcie port.
- can read data and write data in SSD, DO NOT SUPPORT AS THE SYSTEM STARTUP DISK..
- SSD formated in Mac OS systerm can’t be compatible with Microsoft system,so new SSD without partition,ssd can’t be shown in table of “My Computer”, please use the Disk Manager in Windows to delete the old partitions and create a new partition..
- Support : 2013-2017 Macbook Air(11″ or 13″) A1465 A1466 SSD..
- Notice: Please make sure correct forward side pins (16+12) back side(14+11). Please make sure your SSD models before buying! It can not support 2010 and 2011 version MacBook Air A1370 and A1369 SSD,it can not support 2012 version MacBook Air A1465 and A1466 SSD,it can not support 2012 and Early 2013 Version MacBook Pro A1425 and A1398 SSD!.
- Support : 2013-2017 Macbook Pro Retina(13″ or 15″) A1502 A1398 SSD..
Check Stock
GODSHARK PCIe SSD Adapter Card for 2013 2014 2015 2016 2017 MacBook Air Pro Retina, Hard Drive Controller Converter to Desktop PCI Express X4, Support Model A1465 A1466 A1398 A1502
- can read data and write data in SSD, DO NOT SUPPORT AS THE SYSTEM STARTUP DISK..
- Support : 2013-2017 Macbook Air(11″ or 13″) A1465 A1466 SSD..
- SSD formated in Mac OS systerm can’t be compatible with Microsoft system,so new SSD without partition,ssd can’t be shown in table of “My Computer”, please use the Disk Manager in Windows to delete the old partitions and create a new partition..
- Notice: Please make sure correct forward side pins (16+12) back side(14+11). Please make sure your SSD models before buying! It can not support 2010 and 2011 version MacBook Air A1370 and A1369 SSD,it can not support 2012 version MacBook Air A1465 and A1466 SSD,it can not support 2012 and Early 2013 Version MacBook Pro A1425 and A1398 SSD!.
- The PCIe x4 adapter only support x4/ x8/ x16 pcie port.
- Support : 2013-2017 Macbook Pro Retina(13″ or 15″) A1502 A1398 SSD..
Check Stock
Willhom M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air (2013-2017)
- 1* M.2 NVME SSD Convert Adapter Card + 1* Screwdriver + 3* Screws included. The NVME SSD Convert Adapter is DIY kit for assembling an upgraded SSD replacement for MacBook with large capacity NVME SSD. ( DO NOT fit external SSD enclosure ).
- Compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13" A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
- Require macOS 10.13 High Sierra or Later, NOT compatible with earlier than macOS 10.13 versions( 2010 2011 2012 27’’ and 21.5’’ iMAC A1419 A1418). Please use your original SSD to upgrade your macOS before installation.
- Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on..
- Tips: macOS failed on resume from hibernating with some NVME SSDs of some brands. Have to turn off laptop all the time instead of close the lid and go.
Check Stock
