Supplying Demand 203-3132 6 Feet Dryer Gas Hose with 1/2 Inch MIP and 1/2 Inch FIP Connections

  • Hose Fittings Are Compatible With 1/2" MIP and 1/2" FIP.
  • Comes in Supplying Demand packaging with help support.
  • The fittings are half inch. The hose is not. Therefore if needing a larger hose diameter then please contact support..
  • This item is not universal. This item is mainly used for dryers. If you are not sure what you need contact us before ordering to avoid delays in your....
Check Stock

Terisass Bleed Screw M10 1.0mm Motorcycle Brake Master Cylinder Bleed Screw Aluminum Nipple Banjo Bolt with 2Pcs Washers & O-Ring Kit Universal(Black)

  • 【Why do you need it】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Replacement bleed nipple for the front or rear brake lines..
  • 【Banjo Bolt Bleed Screw】M10x1.0mm Motorcycle Brake Braking Caliper Bleed Screw Nipple with Dust Cap.
  • 【Fitment】:Also be fitted to back of the master cylinders to bleed out trapped air. Easy installation, suitable for many motorcycle applications..
  • 【High Quality】:This bleed screw is made of high quality aluminum, anodized coloring for rust and corrosion resistance, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
  • 【Excellent Perforamnce】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Each component is precision-machined to exact tolerances for trouble-free.
Check Stock

Brass Hose Bibb [79-112] Compares to Arrowhead Brass 3/4'Male NPT Inlet with 3/4 water hose outlet ideal for gardens and patios Llave de Manguera o Nariz 3/4'

  • Arrow Head Brass & Plumbing Standard Type Hose Bibb, 3/4" Inch MIP x 3/4 Inch MIP, Brass.
  • This outdoor Spigot has straight short shank and Heavy duty design.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

PROCURU 1/2" OD x 24" Long WeatherProof Stainless Steel Gas Flex Connector Kit with SafeGuard Coating for Dryers, Bbq Grills, Water Heaters

  • 1/2" Outer diameter x 24" length (2 ft.) stainless steel gas connector with SafeGuard Coating for anti-corrosion and air-tight protection.
  • (3) Brass fittings included: 1/2" MIP (tapped 3/8" FIP) (2 pcs), and 3/4" MIP (tapped 1/2" FIP) (1 pc).
  • Also included: 4-Mil high-density PTFE sealant tape 1/2" x 520", gas leak detector, installation instructions.
  • Designed for gas dryer, water heater, bbq grills, and other natural and propane gas appliances.
  • 100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, LP, and LP-gas air mixtures.
Check Stock

Dormont Safety-Shield Gas Appliance Connector Kit (0240892) 30C-3131KIT-48B - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

  • Designed for: Ranges, Stoves, Furnaces or Boilers.
  • Included Adapters - 90-3031-(2) - 5/8 In.OD Flare X 1/2 In. MIP (Tapped 3/8 In. FIP) - 90-3041- (1) - 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
  • 304 Stainless Steel flexible tubing with plated steel end fittings.
Check Stock

EXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

  • Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
  • This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
  • 304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
  • 48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
  • This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
Check Stock

MiP App

  • Drive - Drive MiP around with either single or dual joystick control..
  • Record - Create funny videos of MiP having fun to share with friends..
  • Battle: Last MiP Standing - Challenge other MiPs head to head and see who is the Last MiP Standing..
  • Cans - Feed MiP different Canisters and see how its mood changes and does quirky routines..
  • Dance - Play your favorite song from iTunes and have MiP Dance away to it..
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Easyflex Yellow Coated Stainless Steel 3/4 MIP x 3/4 FIP Full Flow 1 OD Gas Flex Connector 18

  • Yellow coated polymer exterior & double corrugated for extra protection and flexibility.
  • Comes with MIP and FIP flare fittings with 3/4" full flow inner diameter.
  • Compatible with Brasscraft CSSB21 for high rating BTU.
  • CSA certified and ideal for indoor and outdoor use.
  • Application includes residential/commercial tank and tankless water heaters, boilers, fryers, stoves.
Check Stock

EZ-Fluid 24" Stainless Steel Corrugated Yellow Epoxy Coated 1/2" MIP x 1/2" FIP Gas Flex,Flexible Natural Gas Connector Hose Supply Line For Gas Pipe,Hot Water Heater,Range,Dryer,Stove(1 Pack)

  • EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility.
  • EZ-Fluid 3/8" FIP or 1/2" MIP x 1/2" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use.
  • Comes with MIP and FIP flare fittings. Fits on 1/2" FIP Gas valve or 1/2" Flare x 1/2" FIP Gas Valve,Male end Flare Fitting come with 1/2" NPT outter Thread and 3/8" NPT inner Thread..
  • Application For residential/commercial tank and Gas tankless ,Hot water Gas heater, boiler, fryer, stove,Dryer,Range,Gas Pipe ,Fire pit ,Grill and more.
  • The corrosion-resistant yellow coating protects the product from exposure from harsh weather and certain chemicals.
Check Stock

Highcraft GUHDZD3436Q 36 Flexible Yellow Epoxy Coated Gas Line Connector with 1 O.D and 3/4 FIP x 3/4 MIP Fittings Stainless Steel

  • High BTU Gas Connector with 1" Outer Diameter.
  • 36" Long with 3/4" FIP x 3/4" MIP Fittings.
  • Designed and Engineered for Safe, Optimal Flow Rate.
  • FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304.
  • For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters.
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Certified Appliance Accessories CERT77300 Universal Gas Line Connector Kit, 4 Feet, gray

  • 4ft heavy-duty stainless steel connector with 5/8” MIP (Male Iron Pipe) x 5/8” MIP on each end.
  • Two 5/8" OD (Outer Diameter) flare x 1/2" MIP tapped with 3/8" FIP (Female Iron Pipe) adapters.
  • 5/8" OD flare x 3/4" MIP tapped with 1/2" FIP adapter.
  • Supplies up to 106,000 BTU (British Thermal Unit)/hour.
  • Includes one 4-Feet heavy-duty stainless steel connector, one 5/8-Inch od flare x 1/2-Inch m.i.p. (tapped with 3/8-Inch f.i.p.) adapter.
Check Stock