Geekworm Raspberry Pi Hdmi-in Module, Hdmi to CSI-2 C779, Hdmi inpute TC358743 Supports up to 1080p25fps Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W

  • 【User manual】Refer to our WiKi search(HDMI_TO_CSI-2).
  • 【Overview】This is a Raspberry Pi Hdmi to CSI-2 Module with Toshiba TC358743XBG chip, Hdmi-input supports up to 1080p25fps..
  • 【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi Zero W, Raspberry Pi Zero 2W...
  • 【Packing List】 ✔1 xHdmi-to-CSI-2 C779 ✔2 x FFC Cable(15cm/5.91inch length).
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

Geekworm Raspberry Pi Hdmi in Module, Hdmi to CSI-2 C790, Hdmi Input TC358743 Supports up to 1080p60fps Video & Audio Supported Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W/CM4

  • 【Overview】This C790 Hdmi to CSI module takes the incoming HDMI signal and converts it into a separate CSI signal&I2S audio signal. ( Raspberry Pi 4 and Pi ZeRo only support 2 lan, max 1080P@50fps, and CM4 can support 4 lan, max 1080P@60fps).
  • 【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero/Zero W/Zero 2W, Raspberry Pi CM4/CM3 with IO board..
  • HDMI Input: supports up to 1080P60Hz on Raspberry Pi.
  • 【Packing List】: ✔1 x HDMI to CSI-2 Module C790 ✔1 x FPC 15pin 1.0mm cable(15cm length) ✔1 x FPC 22pin 0.5mm cable(15cm length) ✔1 x I2S cable (15cm length).
  • 【User manual】Refer to our WiKi search C790..
Check Stock

Arducam 16MP Autofocus Raspberry Pi Camera Module with ABS Case, IMX519 16 Megapixel High Resolution Autofocus Camera for All Raspberry Pi Models

  • 【16MP for All Pis】The Raspberry Pi camera features a 16MP IMX519 sensor with a pixel resolution of 4656 x 3496, twice as high as the v2 camera and 40% higher than the HQ camera.
  • Compatible with any Raspberry Pi board with a MIPI/CSI interface.
  • Unlike the native Pi camera, this camera requires some simple script configuration before use, and does not support raspbian..
  • 【IMX519 AF Camera Moudle】Built-in autofocus motor allows you to get focus quickly so that you can focus to infinity no matter where you place your camera. The minimum focus distance is 10cm, and the longest allowed exposure time is 200 seconds..
  • 【Crisper Images/Videos】The 16 megapixel camera can capture 1080p Full HD video at up to 30 frames per second and 720p HD video at up to 60 frames per second, and also provides an effective 80-degree field of view..
  • 【V1/V2 Size】The autofocus camera module has the same size as the pi camera V2, the package comes with plastic housing, also suitable for V1 and V2 boards. And the housing also has an integrated tripod mounting hole, which you can install on any 1/4 hole distance tripod..
  • 【Package Contents】The package includes a camera board with IMX519 sensor and an autofocus lens, an FPC cable and a camera housing. Please search ....
Check Stock

8 Pieces Camera Compatible with Raspberry Pi Module with 15 Pin Ribbon Cable and Flex Extension Cable Set Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4

  • ... fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,5 megapixel sensor OV5647, and its video resolution is 1080p, which is clear enough for you to use.
  • This is a practical design for you to take some beautiful photos of your family.
  • Flex extension cable set: whatever for 3D printer, home security, or other for raspberry pi camera project, this camera cable set can totally meet your requirement.
  • Compatible with all Raspberry Pi board, camera module and display, suitable for octoprint 3D printing monitoring.
  • Wide compatibility: this 5 megapixels camera module is compatible with raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4, works well with your equipment, bring you high-definition images for raspberry pi is suitable for aerial photography, car real-time photography, indoor and outdoor photography, video recording, travel vlog and so on.
Check Stock

DORHEA Raspberry Pi Mini Camera Video Module 5 Megapixels 1080p Sensor OV5647 Webcam for Raspberry Pi Model A/B/A+/B+ Pi 2B and Raspberry Pi 3B Pi 3 B+ Raspberry Pi 4 B

  • High Quality -- Good condition, with high quality, great performance, solid construction..
  • Camera Specifications -- The camera is capable of 2592 x 1944 pixel static images,and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p....
  • Fixed Focus -- The sensor has a native resolution of 5 megapixel with OV5647 sensor in a fixed-focus lens..
  • Compatible With -- High-Definition video camera for Raspberry Pi Model A, B, B+, Raspberry Pi 2 B, Raspberry Pi 3,3 B+ ,Pi 4 B..
  • CSI Interface -- This interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera....
Check Stock

2 Pieces 5 Megapixels 1080p Sensor OV5647 Mini Camera Module with 6 Inch 15 Pin Ribbon Cable Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4

  • Wide compatibility: our high-definition raspberry pi version 1.3 camera modules are suitable for raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4.
  • Focus lens: our 5 megapixels OV5647 sensor has equipped with fixed focus lens, can help you to grasp clear and beautiful pictures.
  • Still picture resolution: 2592 x 1944, its max video resolution is 1080p, clear enough for you to use, a practical part for you to take some exquisite photos for your family.
  • CSI interface: this interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth ink which carries pixel data from the camera back to the processor.
  • Package content: you will receive 2 pieces of 5 megapixels 1080p sensor OV5647 mini camera and 2 pieces of 6 inches 15 pin ribbon cable, each one can serve you for a long time, enough for daily using and replacing.
Check Stock

for Raspberry pi Camera Day & Night Vision IR-Cut Video Camera 1080p HD Webcam 5MP OV5647 Sensor for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Zero W by Longruner

  • ♥All-day image - it's built-in ir-cut camera, automatically switches day and night mode for better and clearer image. This can avoid image color....
  • ♥Support all PRI model - This Raspberry Pi camera Compatible with Raspberry Pi 4/3/2/1 model B/ B +/ a + Pi zero & w..
  • ♥Csi interface - This Pi camera module uses the dedicated CSI interface, via the CSI bus, A higher bandwidth Link which carries 5 megapixels data....
  • ♥1080P HD Webcam - the IR video Camera is capable of 2592 x 1944 pixel static images, and also supports 1080 P @ 30 FPS, 720 P @ 60 FPS and 640 x480....
  • ♥Strong customer service team - as long as you have any questions about the product, we will solve your problem immediately when we receive your....
Check Stock

Yahboom Raspberry Pi 4 Model B 8G

  • 2. 4 GHz and 5. 0 GHz IEEE 802. 11B/g/n/ac Wireless LAN, Bluetooth 5. 0, double-true Gigabit Ethernet.
  • Raspberry Pi 4 model B it adopt 1.5GHz 64-bit quad-core CPU and Broadcom BCM2711..
  • Raspberry Pi 4B is equipped with 2GB/4GB RAM, USB 3.0 port, 40 GPIO pins, Micro HDMI port, CSI camera port, DSI display port and Ethernet port..
  • 4 B board possesses Bluetooth 5.0, adopt Type-C charging port and support Gigabit Ethernet..
  • Raspberry Pi 4 model B Most performance is better than 3B/3B+. It can be used to create various smart robots, tablet PC or more DIY products..
  • Most of the robots produced by Yahboom are based on the Raspberry Pi 4B motherboard.
Check Stock

for Raspberry pi Camera Day & Night Vision, IR-Cut Video Camera 1080p HD Webcam 5MP OV5647 Sensor for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera by Longruner

  • ♥All-day image - it's built-in ir-cut camera, automatically switches day and night mode for better and clearer image. This can avoid image color cast, which is easier for beginners to use..
  • ♥Compatible with - This Raspberry Pi camera Compatible with Raspberry Pi 4/3/2/1 model B/ B +/ a +(except Pi zero & w)..
  • ♥Csi interface - This Pi camera module uses the dedicated CSI interface, via the CSI bus, A higher bandwidth Link which carries 5 megapixels data from the camera back to the processor..
  • ♥1080P HD Webcam - the IR video Camera is capable of 2592 x 1944 pixel static images, and also supports 1080 P @ 30 FPS, 720 P @ 60 FPS and 640 x480 P 60/90 video Recording, with 5MP Ov5647 1080P webcam sensor..
  • ♥Strong customer service team - as long as you have any questions about the product, we will solve your problem immediately when we receive your email..
Check Stock

Aokin for Raspberry Pi Camera Module 5MP 1080p with OV5647 Sensor Video Camera Module for Raspberry Pi Model A/B/B+ Pi 2 Raspberry Pi 3 3B+ Pi 4 and Pi Zero/Zero W with Flex Cable

  • Compatible: camera module fit for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B 3B+, Pi 4B, Pi Zero, Pi Zero W..
  • Ribbon flex cable: 11.81in/30cm golden camera cable specially designed for Raspberry Pi zero/zero w.
  • 5.90in/15cm and 19.68in/50cm white camera cable....
  • Specification: 5 Megapixels sensor with OV5647 webcam sensor in a fixed-focus lens.
  • the high-definition video camera is capable of 2592 x 1944 pixel....
  • Endless creativity: 15-pin MIPI camera serial interface - plugs directly into for the Raspberry Pi board.
  • The camera module size: 25mm×24mm×9mm and....
  • If you have any issues for raspberry pi version 1.3 camera module, please contact us by Amazon message, we will do our best for you..
Check Stock

Arducam Raspberry Pi Camera Module 3 Wide, 120°(D) IMX708 Autofocus Pi Camera V3 with Acrylic Case, 15cm 15-22 Pin FFC Cable

  • Compatible with all Raspberry Pi boards: Raspberry pi camera v3 works with all Raspberry Pi models, 4B/3B, Pi Zero W/2 W..
  • Based on IMX708 sensor with HDR, 4608 x 2592 is the highest resolution you can get for still images, 1080p50 max for video..
  • The autofocus of pi cam v3 is achieved by a mixture of PDAF and CDAF, ensuring crisp and clear images..
  • Fully support libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration..
  • Come with a 15cm 15-22pin camera cable, especially for Raspberry Pi zero 2 w.
  • also an acrylic camera case included, easily mount on any tripod with 1/4"-20 mounting screws..
Check Stock

Geekworm KVM-A4 Kit Compatible with PiKVM HDMI CSI for Raspberry Pi Zero 2W/Zero W Only(Not Include Raspberry Pi)

  • 【What is it】This kit allows user to realize a PiKVM / KVM project with Raspberry Pi Zero 2W/Zero W which can control a computer using a web browser!.
  • 【Compatiblity】for use with Raspberry Pi Zero 2W or Raspberry Pi Zero W only, NOT support Raspberry Pi Zero..
  • 【Function】Remotely turn on/ turn off / restart your computer.
  • reinstall the OS using the Virtual CD-ROM or Flash Drive.
  • Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
  • 【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
  • Power Via USB Type-C port of X630-A4. (DON'T power via Raspberry Pi's micro USB port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
  • 【Cooling Solution】Come with C296 aluminum alloy heatsink for heat dissipation of Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【What Included】1 x X630-A4 V1.1 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
  • 【Extra Needed】Raspberry Pi Zero 2W/Ze....
Check Stock