Categories

Best Miter Box Clamp

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Duck Hunting T Shirt - Seven Drakes by Committed Waterfowl

  • 【Wide Compatibility】DW715 12" compound miter saw, DW DWS780 type 1, DWS782 sliding miter saw..
  • 【Note】Not fit: DW703, DW705, DW708 12" miter saw, DW713 10" saw, DW716 !!!.
  • 【Premium Quality】Table saw bag dust is made of healthy and environmentally friendly material, can be recycled many times.
  • 【Easy to Install】As long as you have the plastic receiver with the wire and the sawdust bag is attached to the receiver with the plastic clamp,....
  • 【Keep Cleaner】Captures sawdust in miter saw bag universal when you work.keep your shop and your work surface cleaner.Prevents dust from catching....
Check Stock

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Trend UVJS/TG/JIG Varijig Tenon and Grooving Jig

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Feiyang Miter Spring Clamps Kit for Woodworking,Picture Frames,Wood Trim,Moldings

  • When you making picture frames,moldings,wood trim work,and any compound miter,the biggest trouble in gluing up mitered corners is keeping them from....
  • You can use the miter spring pliers to easily open the sharp tip, just place the spring clamp onto the mitered corner you need to secure, then release....
  • Unlike other available spring clamps, the uniquely designed tip is designed to pierce the wood,so that there is minimal visible evidence of the clamps....
  • The miter clamps are designed with no gaps,can be applied for pocket-sized projects,and spread up to approximately 2 inches,so they will cover most....
  • Great for any compound miter. If you are a woodworking enthusiasts,contractors,carpenters or craft hobbyists,you will love this tool..
Check Stock

POWERTEC MT4000MBA Miter Saw Stand Mounting Brackets – Set of 2

  • INCLUDES: (2) Miter Saw Stand Mounting Brackets and mounting hardware.
  • FUNCTION: The perfect OEM replacement, this bracket assembly utilizes tool mounts to allows you to attach and detach your saw and power tools from your stand. Extra sets will allow you to quick change multiple tools..
  • DESIGN FEATURES: Ergonomically designed clamp handles for comfortable operation, along with a heavy-duty, durable steel construction featuring a black powder coated finish to withstand long-term wear and tear.
  • NON-MARRING: Equipped with premium plastic feet that can be used off the stand with level base to protect the brackets and prevent your work material from scratching.
  • COMPATIBILITY: IMPORTANT check the dimensions listed in the attached images to determine if these brackets fit your application. Fits miter saw stand frames made from 1-1/2” steel tubing with an overall width of 7” and can be adjusted +, - ½” Works with POWERTEC Deluxe Miter Saw Stand with Wheels and 110V Power Outlet (MT4000), along with the Ryobi Miter Saw Stand, and other similarly sized popular brands of miter saws stands..
Check Stock

Xcalibur Tooling Heavy Duty Tenoning Jig for Table Saw & Cutting Tenons - Versatile & Sturdy Woodworking Tool (Pack of 1)

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock

Pony Jorgensen 9180 Adjustable 45-Degree Angle Clamp

  • Clamp will miter or butt joints and is perfect for framing and cabinet assembly.
  • Features 2-1/2" miter/butt joint capacity.
  • Plastic coated die cast jaws for non-marring..
  • Rear jaw swivels for easy adjustment on different material thickness..
  • Large comfortable handle and acme threads for strength.
Check Stock

O SKOOL Miter Max Corner Clamp for Woodworking Making Window Casing Making Door Casing Crafting Projects

  • Turn one-half turn of the handle, the pins will insert into the wood with rotation, make sure the wooden junction connected tightly for holding miters....
  • This miter clamp is made from heavy gauge steel and solid brass. The rustproof and rugged construction ensures these clamps will be reliable for a....
  • The pins on the miter clamp bite into the wood to keep it in place. It does leave a few dimples in the edge of the wood, but so would spring clamps or....
  • The jig's unique cam design exerts such pressure on mitre joints that wood piece can be hauled around by one leg immediately after gluing. You get a....
Check Stock