Categories

Best Miter Dust Bag

HQRP Dust Bag compatible with Hitachi C12FA C12FCH C12FDH C12FSA C12LC C12LCH C12LDH C12LSH C12RSH C12RSH2 12' Miter Saws, for 2 1/2' dust port

  • HQRP® Dust Collector Bag with Wire Support Frame.
  • For Miter Saws with 2-1/2" dust port on the exterior of the saw !!! If the dust port is less than 2.5" in diameter, you will need some additional retainer..
  • Dimensions: L 10.75" x W 6", Diameter of ring 2 1/2".
  • Replacement for Hitachi part # 322955 Dust Bag.
  • Compatible with Hitachi 10" and 12" Miter Saw.
  • Collects up to 70% of dust and particles.
  • Easy to attach and detach to your miter saw.
Check Stock

Miter Saw, SMADRON 12inch Double-Bevel Sliding Compound Glide Miter Saw, Chop Saw with Laser marker, 15Amp Motor, 40T Blade for Wood Cut

  • 【Compound Miter Saw with Powerful Motor】The 15-amp/1800W with 3800rpm motor delivers high power to smooth and fast cutting on carpentry work. And the 12-inch blade comes with sharp 40 teeth makes easy work of cutting and bevel cut. An ideal tool for fine woodworking, carpentry, general construction, and more..
  • 【Double Bevel Saw】The double bevel design enables the saw to bevel around 0-45 degrees and the miter angle be in a range of -45-0-45 degrees, that can meet different bevel cutting needs. The cut capacity up to 4.13x13.19 inches at 90 degree and 2.36x13.19 inches at 45 degree, offers more possibilities for your work than a single-beveled miter saw..
  • 【User-Friendly Design】With 2 extendable side pieces, the miter saw offer a larger work table to meet your requirement of large pieces cuts, and the clamping device system helps for better material support to secure work piece. An efficient dust bag is equipped to collect more than 70% of the dust produced, keeping your work environment clean and tidy..
  • 【Precision & Safety】Adjustable miter scale with precise stops (-45°/-30°/-22.5°/-15°/0°/+15°/+22.5°/+30°/+45°) ensures clean and accurate bevel cuts. Built-in visible laser indicator for increased cutting accuracy and predictable ....
Check Stock

Metabo HPT 10-Inch Miter Saw | Laser Marker | Single Bevel | Compound | 15-Amp Motor | C10FCH2S

  • INCLUDES: C10FCH2S Miter Saw, 10" 24T TCT Saw Blade, Pivoting Flip Fence, Dust Bag, Vise Assembly (322952), 10mm Box Wrench (940543), 4mm Hex Bar Wrench, Material Support Extension.
  • MOTOR: 15 Amp motor, powerful for the toughest cutting jobs.
  • Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
  • MITER ANGLE RANGE: 0-52 Degree miter angle range to the right and left for increased flexibility.
Check Stock

DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw (Discontinued)

  • Includes: a carbide blade, dust bag, blade wrench and comfortable side handles in the base.
  • Miter detent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • Adjustable stainless steel miter detent plate with 11 positive stops.
  • Tall sliding fences that support crown moulding up to 5-1/4-Inch. nested and base moulding up to 6-1/2-Inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • Crosscut capacity up to 2×8-Inch dimensional lumber.
  • Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown moulding laying flat.
  • 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles.
  • Cam lock miter handle with miter detent override that eliminates the need to twist the handle to lock in on the angle.
Check Stock

2pcs 089006017092 for Ryobi Motor Brush Ridgid Tile Miter Saw Carbon R4040 TS1344L

  • Dust bag for Ryobi miter saws with 1.5" dust port.
  • Spring clamp on dust bag opens from 1.5" to 1.75".
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Hitachi 308506 Dust Collection Adapter for Hitachi C10FSH, C8FB2, C10FCH, C12FSA, C12LCH and C15FB Compound Miter Saws

  • Eliminates dust generated by miter saws and illuminates work surface.
  • Interior baffles prevent escape of fine dust.
  • Use with shop vac, dust collectors or installed vacuum systems.
  • Hood folds into heavy duty carry bag for compact storage and transport.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Metabo HPT Sliding Compound Miter Saw | 10-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C10FSHCT

  • INCLUDES: C10FSHCT miter saw, 10" 40T TCT Saw Blade, Dust Bag, Vise Assembly, 13mm Box Wrench.
  • POWER: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
  • BEVEL ANGLE: 0-48 degree bevel angle range to the right and left allows user to quickly and easily flip the saw blade, and leave the material in place.
  • MITER ANGLE: 0-60° miter angle to the right and 0-55°miter angle to the left for ultra-flexibility.
  • COMPACT SLIDE SYSTEM: Simple and compact slide system allows the saw Head to slide along fixed rails, for zero rear clearance.
Check Stock

WEN MM1011T 15-Amp 10-Inch Single Bevel Compact Sliding Compound Miter Saw with Laser, Black

  • Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick.
  • Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left.
  • Onboard class II laser guide illuminates your line of cut.
  • Features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity.
  • Includes a 10-inch 40-tooth carbide-tipped blade, two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty.
Check Stock

WEN MM1015 15-Amp 10-Inch Dual Bevel Sliding Compound Miter Saw with LED Cutline

  • Powerful 15-amp motor crosscuts boards up to 12 inches wide and 3.75 inches thick.
  • Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint.
  • Bevel up to 45 degrees or miter up to 49 degrees in either direction (featuring 9 miter stops).
  • Onboard LED cutline guide illuminates your line of cut for maximum accuracy.
  • Includes a 40-tooth carbide-tipped blade with a 5/8-inch arbor (model BL1040), two adjustable support fences, one quick-clamp assembly, a dust port, a dust bag, a carrying handle, and a two-year warranty.
Check Stock

WEN MM1215 15-Amp 12-Inch Dual Bevel Sliding Compound Miter Saw with LED Cutline

  • Powerful 15-amp motor crosscuts boards up to 13.25 inches wide and 4.5 inches thick.
  • Unique dual-rail slide system allows for compact operation flush against the wall while minimizing the saw’s footprint.
  • Bevel or miter up to 45 degrees in either direction (featuring 9 miter stops).
  • Onboard LED cutline guide illuminates your line of cut for maximum accuracy.
  • Includes an 80-tooth carbide-tipped blade with a 1-inch arbor (model BL1280), two quick-lock table extension support arms, two adjustable support fences, one quick-clamp assembly, a dust port, a dust bag, a carrying handle, and a two-year warranty.
Check Stock

Premium Hedgehog Push Block for Table Saws and Router Tables

  • 【Compatible with】 Replacement for Bosch /Dewalt /Makita /Ryobi/ Craftsman /Porter Cable/ RIGID/ Metabo/ Kobalt/ Skilsaw/ Delta 10 inch tablesaws, and other table saws that have 2-1/2 inch dust ports on the exterior of the saw..
  • 【Effective Dust Collection】Effective at keeping your work area clear of debris. Provides up to 70% of dust collection..
  • 【Easy to Use】Easy to attach and detach to your table saw. Simply squeeze the spring clamp and slide clamp over tabs on dust port and release spring clamp. The dust bag requires emptying when full of sawdust..
  • 【Package Contents】Pack of 2 miter saw dust bag in vacuum & dust collector accessories..
  • 【After Buying Service】: We are pleasured to help you.Please note that we are always here to help. Please contact us through Amazon if you have any questions or inquiries..
Check Stock