Best Miter Saw Blade For Fine Cuts

CRAFTSMAN CMXPTSG1013NB 3-inch Air Cut Off Tool, Red

Easy to Use for Cutting Metal, Aluminum, Copper, Plastic and Wood.
Cuts Wood, Brass & Similar Light Materials with Smooth, Precise Cuts.
Cuts to a Depth of 1/2 in. - Ideal for Frames and Molding,Make Miter Cuts from 0° to 45°.
Fast 7800 Rpm and a 3/8-Inch Arbor,50mm Blade Diameter and 0.5mm Blade Thickness.
This Mini Benchtop Cutoff Miter Saw Is a Mini Benchtop Mounted Cut-off Saw with High-speed Steel Blade for Cutting Metal, Wood, Plastic and Other Light Materials. Has Adjustable Miter Gauge, Perfect for All Your Diy Projects.

Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....

Check Stock

Husqvarna K4000 Cut-N-Break Saw Orange

[SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
[CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
[TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
[0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
[ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.

Check Stock

JOUNJIP (3) 2-5/16” HSS Blade Bundle with Mini Miter Cut-Off Chop Saw

【Powerful Mini Miter Saw】- Make miter cuts from 0° to 45°. Cuts to a depth of 1/2 in. – ideal for frames and molding. High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel..
【High-Precision】- This 110V mini chop saw is so accurate that you might never have to file or sand ends! Has adjustable miter gauge for cutting soft metals, wood, plastic and other light materials, perfect for all your DIY projects..
【Precise Smooth Cuts】This mini cut off saw carbon arrow cutter is so accurate that you might never have to file or sand ends! Cuts wood, brass & similar light materials with smooth, precise cuts. Ideal for Small Hobby and DIY Crafts..
【Multi-Purpose】 Small miter saw table saw with adjustable miter gauge, 100T HSS saw blade for cutting soft non-ferrous metals, wood, plastic and other lightweight materials. 2 inch Black Cut-Off Wheel are designed for cutting fiberglass, steel, stainless steel, and other ferrous metals for aggressive cutting action. Perfect for carbon steel, carbon arrows, and mini general purpose metal cutting..
【Quality Service】We guarantee to provide you with the most satisfactory shopping service, no matter if you have any questions about our product,you are welcome to c....

Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.

Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.

Check Stock

Shop Fox W1888 10\ Hybrid Table Saw With Riving Knife, White

...ded nails and plastic, all with just one blade that comes included with this table saw..
Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..

Check Stock

Angle Finder Aluminum Miter Saw Protractor, Rust Proof Angle Finder Featuring Precision Laser Engraved Scales Miter Angle Finder for Carpenters, Plumbers and All Building Trades

Angles are no longer a guess: Easily measure the inside-outside angles. Fit for woodworking, carpentry trimming, or DIY jobs. Fast and easy-to-find miter cuts. It will save you so much time and a LOT of money on wasted wood. Quick and easy to use, with no need for complex or expensive tools. just hold the protractor up to the angle, read the degree measurement for the miter cut, set your miter saw at that angle, and cut your piece. It reads single cuts as well as miter cuts..
Fast and easy-to-find miter cuts: Provides you the exact angle you need, either inside or outside corners. Its two plates can directly transfer your work angle to the miter saw for an accurate miter cut and single cut, saving you time and effort. Very easy to use and read, get an edge or corner miter perfect. The EVERSEE protractor couldn't be simpler. Compact and adjustable design makes it easy to carry and convenient to use. MAKE YOUR LIFE SO MUCH EASIER when it comes to making accurate cuts..
Durable engineered aluminum alloy & rust-proof: Durable construction ensures long-lasting performance. It is designed to be compact and lightweight. It eliminates calculations, reduces errors, ....

Check Stock

PROXXON Chop and Miter Saw KGS 80, 37160 , Green

For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood.
Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned.
Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals.
Integrated tightening mechanism with self-centering clamps, V-groove for round pieces, front side groove for clamping thin work pieces.
Scope of delivery: 1x PROXXON Chop and Miter Saw KGS 80 including carbide tipped saw blade. Part number: 37160.

Check Stock

DEWALT 12-Inch Sliding Compound Miter Saw, Double Bevel (DWS780) , Black

Integrated CUTLINE Blade Positioning System provides adjustment free cut line indication for better accuracy and visibility for the 12-inch miter saw blade.
XPS technology uses an LED to project light down either side of the blade, creating a shadow on the cutline once the saw arm is lowered.
Super-efficient dust collection system of DEWALT miter saw captures over 75% of dust generated.
Tall sliding fences support crown molding up to 7-1/2-inch nested and base molding up to 6-3/4-inch vertically against the fence while easily sliding out of the way for bevel cuts.
Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x10 at 45 degree.

Check Stock

VEVOR Mini Miter Cut-off Chop Saw, Two 2-5/16" Blade of Steel and Resin with 1/2inch Cutting Depth, 0-45° Benchtop Miter Saw for Copper, Aluminum, Wood, Zinc in Hobby Craft

【Powerful Mini Miter Saw】- Make miter cuts from 0° to 45°. Cuts to a depth of 1/2 in. - ideal for frames and molding. High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel..
【High-Precision】- This 110V mini chop saw is so accurate that you might never have to file or sand ends! Has adjustable miter gauge for cutting soft metals, wood, plastic and other light materials, perfect for all your DIY projects..
【Precise Smooth Cuts】This mini cut off saw carbon arrow cutter is so accurate that you might never have to file or sand ends! Cuts wood, brass & similar light materials with smooth, precise cuts. Ideal for Small Hobby and DIY Crafts..
【Multi-Purpose】 Small miter saw table saw with adjustable miter gauge, 100T HSS saw blade for cutting soft non-ferrous metals, wood, plastic and other lightweight materials. 2 inch Black Cut-Off Wheel are designed for cutting fiberglass, steel, stainless steel, and other ferrous metals for aggressive cutting action. Perfect for carbon steel, carbon arrows, and mini general purpose metal cutting..

Check Stock

Benchtop Cut-Off Saw Miniature Compound-Cutting - SI FANG Mini Miter Cut-Off Chop Saw for Metal Wood Plastic Crafts Making Carbon Arrow Shafts Cutting, Max 45° Adjustable Small Electric Table Saw

【Powerful Mini Miter Saw】- Make miter cuts from 0° to 45°. Cuts to a depth of 1/2 in. – ideal for frames and molding. High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel..
【High-Precision】- This 110V mini chop saw is so accurate that you might never have to file or sand ends! Has adjustable miter gauge for cutting soft metals, wood, plastic and other light materials, perfect for all your DIY projects..
【Precise Smooth Cuts】This mini cut off saw carbon arrow cutter is so accurate that you might never have to file or sand ends! Cuts wood, brass & similar light materials with smooth, precise cuts. Ideal for Small Hobby and DIY Crafts..
【Multi-Purpose】 Small miter saw table saw with adjustable miter gauge, 100T HSS saw blade for cutting soft non-ferrous metals, wood, plastic and other lightweight materials. 2 inch Black Cut-Off Wheel are designed for cutting fiberglass, steel, stainless steel, and other ferrous metals for aggressive cutting action. Perfect for carbon steel, carbon arrows, and mini general purpose metal cutting..
【Quality Service】We guarantee to provide you with the most satisfactory shopping service, no matter if you have any questions about our product,you are welcome to c....

Check Stock

GENERAL INTERNATIONAL 7-1/4" Compound Sliding Miter Saw - 10A Dual Slide Rail Chop Saw with 0-45° Bevel & Laser Alignment System - MS3002

7.25 INCH COMPOUND MITER SAW - This powerful yet compact saw features a 7.25" carbide tooth blade for fast, easy cross-cutting of dimensional lumber as large as 2x8.
POWERFUL 10 AMP MOTOR - Powered by a robust 10 amp motor this miter saw has a max no load speed of 5000 RPM and is capable of cutting through some of the toughest job site materials..
BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work..
ACCURATE LASER GUIDED CUTTING - When precision is key to your jobs success, look to the integrated laser alignment system to help you produce fast, accurate cuts ..
DUAL RAIL SLIDING SYSTEM - The two rail sliding system enhances rigidity and provides extra capacity when making long crosscuts, miter cuts and bevel cuts..

Check Stock