Categories

Best Miter Saw Blades

Bosch CBCL1260M 12 In. 60 Tooth Edge Cordless Circular Saw Blade for General Purpose

  • USE WITH: Optimized for any 12" miter saw or slide miter saw.
  • VERSATILITY: Best for fast cross cutting, cutoff and trim of wood and plywood.
  • PRECISION: SpeedCoat antifriction finish for faster and effortless cutting.
  • DURABLE: Blades are designed for tough construction jobs, because they are engineered with Brute Carbide, an upgraded C3/C4 micrograin carbide formulation that increases impact resistance.
  • LONGEVITY: Bosch cordless blades are optimized for cordless cutting, with reduced kerf for speed, less waste, and extended battery life.
Check Stock

Husqvarna K4000 Cut-N-Break Saw Orange

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Check Stock

NEIKO 10768A 12-Inch Carbide Saw Blade | 80 Tooth | 1-Inch Arbor | 5,000 RPM | for Use with Compound Miter Saws | Home Building, Construction, Woodworking Applications

  • [PRECISION]: The circular saw blades are carbide tipped to give great abrasion and heat resistance for a cleaner and smoother cut for greater efficiency and precision on your home improvement projects..
  • [COMPATIBILITY]: This miter saw blade has a 1-inch arbor and comes with a 20 mm arbor reducer for a tight and accurate fit..
  • [CUTTING EDGE]: The edges of this chop saw blade is designed to retain its sharp cutting edge and is ideal for providing a clean, precise cut on wood for home building and other projects, Do-It-Yourself (DIY) or industrial..
  • [RPM]: This saw blade can operate up to a maximum speed of 5000 RPM, allowing the carbide blade to execute clean cuts with ease..
  • [APPLICATION]: For use with a compound miter saw or chop saw, this blade can pivot left and right for angled cuts and perform beveled cuts if needed by manipulating the axes on the miter saw..
Check Stock

Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
  • [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
Check Stock

Official Rotorazer Platinum Replacement Blades Set of 3 for Platinum Rotorazer AS SEEN ON TV

  • Set of 3 OFFICIAL AUTHENTIC ROTORAZER PLATINUM blades (Tungsten, Steel and Diamond Cut) designed for the Rotorazer Platinum Saw, a multi-use all....
  • 7 DIFFERENT SAWS IN ONE. Rotorazer is a combination of a Jigsaw, Circular, Hand, Band, Tile, Hacksaw, & Miter Saw..
  • 1 Diamond Cutting blade best for cutting tile and stone, 1 Tungsten carbide blade with 18 teeth best for cutting wood and laminate, & 1 High-Speed....
  • Circular Saw Kit comes with multiple multi saw blades (Tungsten Carbide, Diamond, Steel), Dust Collector, Saw Case. 85MM blades (vs 54.8MM original....
  • EASILY CUTS IN ANY DIRECTION - horizontally, vertically, straight lines, curved lines, corners, & even upside down..
Check Stock

Turbo Flex 360 Instant Hands Free Faucet Swivel Spray Sink Hose - As Seen on TV

  • Set of 3 OFFICIAL AUTHENTIC ROTORAZER PLATINUM blades (Tungsten, Steel and Diamond Cut) designed for the Rotorazer Platinum Saw, a multi-use all....
  • 7 DIFFERENT SAWS IN ONE. Rotorazer is a combination of a Jigsaw, Circular, Hand, Band, Tile, Hacksaw, & Miter Saw..
  • 1 Diamond Cutting blade best for cutting tile and stone, 1 Tungsten carbide blade with 18 teeth best for cutting wood and laminate, & 1 High-Speed....
  • Circular Saw Kit comes with multiple multi saw blades (Tungsten Carbide, Diamond, Steel), Dust Collector, Saw Case. 85MM blades (vs 54.8MM original....
  • EASILY CUTS IN ANY DIRECTION - horizontally, vertically, straight lines, curved lines, corners, & even upside down..
Check Stock

391926-01 391926-00 for Dewalt Miter Saw DW703 DW705 Replacement Power Switch

  • 【PART NUMBER】 391926-01 Replace 391926-00 Miter Saw Power Switch.
  • 【This Trigger Switch】( For Eaton Style) is an over hang Trigger Switch replaces for Dewalt 391926-01, 391926-00. Used in table saws and power tools with higher ratings.
  • 【Features】Switches are commonly replaced parts in power tools. A switch handles all on/off and variable speed functions. They also have a role in electric breaking.
  • they can momentarily reverse electrical polarity. Because switches use mechanical internals, they tend to degrade and wear out over time, eventually requiring replacement. This particular switch comes as a worthy replacement because it offers high quality at a lower price tag..
  • 【Specifications】 Voltage: 125/250V. Amperage: 24A/12A..
  • 【This part is compatible with】Fits DeWalt: DW703 Type 1 10 Inch Compound Miter Saw, DW703 Type 3 10 Inch Compound Miter Saw, DW705S Type 6 12 Inch Compound Miter Saw, DW705S Type 7 12 inch Compound Miter Saw, DW705S Type 8 12 inch Compound Miter Saw, DW705 Type 6 12 Inch Miter Saw, DW705 Type 7 12 Inch Miter Saw, DW705 Type 8 12 Inch Miter Saw, DW706 Type 1 12 Dual Bevel Miter Saw, DW713 10 Miter Saw.
Check Stock

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock

Overpeak 10-Inch Table Saw Blade ATB Ultra Fine Finishing 90 Teeth Wood Cutting Circular Saw Blades

  • ▲Material – OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades.
  • ▲Low Noise & Cutting Stable – 6 Laser cut expansion slots and 4 Laser-cut stabilizer vents trap noise and vibration, keeping it cool and reducing blade warp.
  • ▲Alternate-Top Bevel Teeth – The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother.
  • ▲Machine Use – Framing saw blade is great for circular saw, table saw, miter saw. RPM up to 6000.
  • ▲General Usage – The Overpeak 10 inch carbide blade is 90 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate.
Check Stock

4410 4412 4000 3915 5412L 4100DG-09 4405 5412 GTS1031 Carbon Brushes compatible with Bosch Miter Table Saw

  • compatible with: Bosch: 4412 (0601665039) 12" Miter Saw 4412 (0601665039) 12" Miter Saw 4000 (0601476139) Table Saw 4000 (0601476139) Table Saw B3915....
  • compatible with: Bosch: 4212L () 12" Dual-Bevel Upfront Control & Laser Tracking Compound Miter Saw 4212L () 12" Dual-Bevel Upfront Control & Laser....
  • compatible with: Bosch: 4212 (060166F035) Miter Saw 4212 (060166F035) Miter Saw 4410 (060166E139) Miter Saw 4410 (060166E139) Miter Saw 4212L....
  • We have been specializing in the production of carbon brushes for 20 years. Our products are not only supplied to Chinese customers, but also sold to....
Check Stock

Hacksaw Set, Steel Saw 12 inch with Replaceable Saw Blades and Metal Miter, 3PCS Handsaws (Hacksaw Frame, Mini Hacksaw, Junior Hacksaw), Metal Saw, Multifunction Hand Saw for Metal, Wood, PVC Pipes

  • 【3 Pcs Hand Saw】: The first one is 12 Inch Hacksaw frame (metal) 1pcs 12 inch mini handsaw (plastic), 1 pcs 6 inch junior hacksaw (metal), metal miter for guiding accurate cutting.
  • 【Multi-function Handsaw】: The Hacksaw set contains 3 pcs Hacksaw frames, 6 pcs saw blades. 4 pcs 24T black saw blades(6&12 inch,) suiable for sawing metal, platic, 1pc silvery saw blades (12 inch, 10T) for sawing wood, 1pc wire (12inch) for woodworking.
  • 【Compact and Safety Design】: The multi saw set is lightweight, compact and easy to carry. The saw blades are easily fitted to the bow saw and replace the blades.
  • 【Widely Use】: This handsaw kit is used for cutting general wood, rubber, soft metal, tile, ceramic and PVC etc. And widely used in construction, decoration, handicraft processing and other industries.
  • 【Quality Material】: The hacksaw made from high quality material, durable and solid. The hacksaw blades can be set as 45 degree or 90 degree according to different situations.
Check Stock

S SATC Saw Blade 4 1/2 Circular Saw Blades 100 Teeth Circular Saw Blade for Cutting Soft Metals Wood Plastic Stainless Steel

  • [Sharp Enough]: The circular saw blade with high-density carbide teeth is designed for cutting soft metal and withstands impact, reduces wear and lasts up to longer service life, no warping..
  • [Long-lasting for Use]: Manufactured with durable high-quality alloy steel, this 4 1/2 circular saw blade is hardened, fully polished and chrome-plated with sharper tungsten carbide teeth for durable cutting of wood, plastic, steel, ferrous metals, composites..
  • [Outstanding Performance]: 100 teeth contained, the miter saw blade makes the best smooth, razor-sharp finish cuts in unit time than other blades with the same size, easy, fast, and precise as expected..
  • [Practical Design]: Laser-cut kerf that maximizes the accuracy of the cut while reducing noise and vibration during operation and the unique design which improves airflow, helps to dissipate heat and removes cutting dust both guarantee you a quiet and efficient work environment..
  • [Perfect Fit]: Saw blade set is ideal for machines that will take a 4 1/2 inch blade, specially for 4 1/2 miter saws and slide miter saws..
Check Stock

Mini Cut-off Miter Saw, 110V Mini Benchtop Cut-Off Chop Saw-Adjust Miter Gauge with 2' Blade 1/2' Cuting Depth Miter for Arts Cutting Wood Plastic Metal DIY Working

  • Mini cut-off miter saw fit for cutting soft wood, plastic, aluminum, copper, fiberglass, brass perfect for all your DIY projects..
  • 110V mini benchtop cut-Off chop saw fit to cuts upto 1/2″ thick wood or 1/2″dia metal tube, cuts miter corners from 0° to 45° with adjustable miter guage..
  • Mini miter cut-off chop saw of main parameters: Maximum speed 7800 rpm and 3/8-Inch arbor, 2-Inch blade diameter and 0 .02 inch blade thickness..
  • mini craft miter saw, mini cut off saw, 2 inch chop saw, mini miter table saw, 2 chop saw, power mini miter saw, miniature miter saw, mini bench saw, miniature cut off saw, miniature craft miter saw.(Note:it can only cut softmetal (like brass, aluminum) with thickness less than 3mm, it can not cut hard metal (like stainless steel/iron) and thick metal..
  • 100% satisfactory service, if you have any questions, please feel free to contact us by email ! We will solve it for you in the first time!.
Check Stock