Categories

Best Miter Track Vs T Track

Anodized Aluminum Combination Miter T Track/Mini T Track Rail for Jigs Fixtures Sleds Router Table and General Woodworking Applications 48 Inch MADE IN THE USA

  • The two most commonly used tracks for woodworkers and general workshops are now combined into one ultimate and super convenient track! Having a standard miter track combined with a mini t track allows you to use multiple jigs and fixtures at once or use for quick and easy change-outs. As with all of our tracks, the walls of the track are thicker than off brands each track is proudly manufactured from start to finish in the USA!.
  • The miter t track side of the track accepts standard miter bars like those found on many miter gauges. This size is approximately ¾” x 3/8” which is the most common miter bar size. The “T” slot accepts standard t-bars that won’t lift out of the track. T-bars are excellent for building sleds or fixtures that need to secured into the track for stationary purposes like featherboards or hold-downs. The miter track side also accepts ¾” x 3/8” UHMW slick bars, which are ideal for mobile sleds..
  • The mini t track side accepts ¼” x 20tpi hex head bolts. Typically you will find this style of bolt on many aftermarket featherboards and shop made work stops. This makes the track perfect for router tables, table saw extensions, band saw table extensions, drill press tables and more. The combination track measures 17/3....
Check Stock

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

  • When building sleds, jigs or fixtures for your woodworking projects that help keep your fixtures from moving or to help your sleds and jigs slide through a track, the Miter T Bar may just be the perfect solution. The Miter T Bar does this bit fitting neatly into most standard miter slots that measure ¾” x 3/8”. The aluminum bar can be used to slide your sleds or it can be used to lock fixtures like featherboards (when cut into smaller length pieces) in place in a miter slot..
  • The T-bar is made in the USA from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
  • When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to....
Check Stock

Rockler Table Saw Small Parts Sled

  • Sled base and fence provide zero-clearance support—just run it through your saw to locate the kerf.
  • Sled rides in miter track of your table saw—included miter slot stop limits forward travel of sled.
  • Rear-mounted blade guard is adjustable to fit most table saws.
  • Aluminum T-track on top edge of fence lets you add a flip stop (not included) for repeatable cuts.
  • Short T-track parallel to blade accepts an optional T-track hold-down clamp (sold separately).
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

POWERTEC 71167 Aluminum Miter T-Track, 48-Inch, Aluminum Grey

  • FUNCTION: Ideal for creating customized sleds, stop blocks, feather boards, hold downs, sliding jigs and fixtures, while featuring a high-utility design that prevents slop in your miter gauge bar, enhancing bench-top tool precision.
  • BUILD: This aluminum t-track extrusion possesses a thick, heavy duty exterior that won’t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability.
  • VERSATILE: This miter track is an essential tool to your workshop made tables (can be used with your 3/4” x 3/8” bar), making it perfect for table saw extensions, router table, band saw, and all-purpose workbench applications.
  • CUSTOMIZABLE: 48 inch profile can be custom cut to suit your individual project needs and specifications.
Check Stock

Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws

  • ...rizontal applications. When the featherboards are stacked with the included 2” tall spacers, you’ll have a full 3-7/8” worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence..
  • Many featherboards come with a miter bar locking system that typically do not fit very well. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. The aluminum bar is longer than older designs and is a bit more narrow in the center. This means that when the knob is secured and the bolt is properly seated, the bar spreads out much better than before and creates a nice tight fit into your miter track..
  • This dual featherboard also includes 1½” long ¼” x 20tpi t-bolts. This gives you the option to mount the featherboards into small t-track slots. These t-track slots are most commonly used on router table tops and router table fences. This means you can use the featherboard vertically on a router table fence or horizontally laying flat on a router table or table saw top surface..
Check Stock

POWERTEC 71703 Table Saw Sled and Blade Guard Kit w/T-Track, Miter Bars, Crosscut Bladerunner, Flip Stop, Bolt and Screws Set

  • INCLUDES: 24” universal t track, 19” HDPE miter bars, 3” flip stop, blade guard, flat head wood screws, hex head bolts and nuts.
  • FUNCTION: Provides you with an easy DIY kit that includes a t-track for mounting flip stops and fixtures, a premium 3” flip stop, blade guard and hardware needed to cut boards to precise lengths while preventing measuring and cutting errors.
  • 100% SAFE: Makes crosscutting safer, more efficient and convenient, while avoiding risking your limb when crosscutting smaller pieces with a crosscut sled specifically calibrated with your table saw.
  • PREMIUM QUALITY: The t-track included in this kit is made of solid extruded aluminum and the miter bars are crafted with high durability, high stability HDPE (high density polyethylene).
  • DIMENSIONS: Universal T-Track (24" long) | High Density Polyethylene bars 19" long x 3/4" x 3/8" | 3" Flip stop | Flat Head Wood Screws #6 x 1/2" | 1/4"-20 x 1/2" hex bolts | 1/4"-20 acorn hex nuts.
Check Stock

Rockler 36'' Miter Track - Miter Slot Fits 1' x 1/2' Deep Dado & Accepts a Standard 3/4' x 3/8' Miter Bar – Premium Grade Anodized Aluminum Miter Track Slot – Comes Pre-Drilled, Countersunk w/ Four Holes

  • Rockler 36'' Miter Track Bar: Our 36” inch miter slot track expands the use of the router table by providing the use of many sleds, clamps, jigs, and other woodworking devices..
  • Perfect Application: Set up your jigs, fixtures, and shop-made router tables for a perfect smooth-sliding miter gauge. This is the ultimate table saw miter track to build your own custom table saw or router table..
  • Perfect Size: The track fits into a 1" x 1/2" deep dado and accepts a standard 3/4" x 3/8" miter bar. Adjusts for perfect sliding action in any standard miter gauge track with just a twist of the wrist..
  • Durable Material: Our woodworking jig miter slider is constructed of 100% aluminum for excellent durability without the weight..
  • Easy Install: For fast, trouble-free installation, the miter slot gauge comes pre-drilled and countersunk with four holes for #6 mounting screws (not included)..
Check Stock

for Woodworking T Tracks 36” with Screws: 4 PCS Predrilled Universal Aluminum T Track for Cross Cut Sled, Router Fence Sled – Woodwork Accessories for Light-duty Woodworking Workshop Jigs DIY

  • ZOKMOK PROFESSIONAL T TRACK: Simple, Multipurpose, 100% Customer Satisfaction Support..
  • 36″ Length x 3/8″ Depth x 3/4″ Width.
  • High-quality #6063 Aluminum Alloy, Fine Sandblast Blue Anodized, Sturdy and Durable..
  • Can be Widely used in Table Saw, Miter Saw Station, Drill Press Table, Router Table, Assembly Table, CNC Table, CNC Router Waste Board, Worktable, Wood Bench but also in Kayak System, Adjustable Shelf, Bike Track, etc..
  • Make your own t track intersection kit with a miter saw, and stick t tracks with glue to get get a better experience..
Check Stock

ZEROPLAY 360 Sled Kit

  • ZEROPLAY Miter Bar’s hassle-free miter bars using One-Touch Calibration..
  • ZEROPLAY Miter Bars will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0. 73" and 0. 79" wide and at least 5/16" deep..
  • Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks..
  • No slop, side-to-side play or seasonal warping..
Check Stock

POWERTEC 71614 Miter T Locking Bolts Improved Flange Bolt & T-Bolt Accessory for 3/4 x 3/8 Miter Gauge Slots on Table Saws Router Table & Unisaw to Mount Feather Boards and Jigs 10PK

  • FUNCTION: When utilized with t-slotted miter slots, these woodworking tools hold workstock in place for positioning and fixturing for a wide range of applications or any type of jig to your table saw, router table, or any tool with a standard 3/4" x 3/8" miter gauge slot.
  • CLAMP ACTION: Clamping action is greatly improved over competitive miter track slot fixture hardware kits. Locking hardware seamlessly slides into and secures with its oversized t-slot mount and allows you to put clamping pressure anywhere along the flush-mounted T-slot or T-track on Table saw.
  • PRECISION and COMPATIBILITY: Allows t-slot stops to be made quickly from both ¾” and 1-1/2” stock – Ideal for hold downs, glue ups and jig fixture assembly.
  • DIMENSIONS: Length 2-inch | Threaded 1/4”-20 | Isolation Mount Oval Shaped Head .971” long by .882” wide by .106” thickness.
Check Stock

Pactrade Marine Boat Tracker Versatrack Adjustable Drink Holder/Lund Sport Track Folding Adjustable Cup Holder (Black, 1 pcs)

  • INCLUDES: (10) Seven Star Knobs, (10) T-Bolts, (10) Washers and (1) Storage Case.
  • FUNCTION: Works with any universal and double cut t-track – helping to secure various jigs and fixtures while optimizing your favorite t-track assemblies. Head is 17/32” wide and WILL NOT FIT ¼” T-TRACK. . Before ordering, please verify the width of your t-track..
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the t-bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your miter gauge or t-track fences, stop blocks, featherboards and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8cm x 2.5cm) | threaded knob is 1/4-inch (6.4mm) diameter by 20 threads per inch | Bolts and washers are 1/4”-20 x 1-1/2-inch.
Check Stock

WoodRiver 5-Piece Miter Track Mount

  • Fits WoodRiver Standard 3/4" Miter Track.
  • Fits most tools with 3/4" x 3/8" miter T-slots - Use these nuts to make handy shop jigs and fixtures.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock