Categories

Best Mitutoyo Digital Micrometer 3

Kynup Digital Caliper, Caliper Measuring Tool, Micrometer Caliper with Large LCD Screen, Stainless Steel, IP54 Splash Proof, Easy Switch from Inch Metric Fraction, Large LCD Screen (6 Inch)

  • ...d easy-to-read LCD display helps you get precise results quickly and easily. even under strong sunlight or in dismal surroundings. Aslo the locking screws ensure that the measuring jaws are securely secured, allowing for more precise measurements..
  • 【Screen Splash Proof & Stainless Steel Material】The dial caliper micrometer is constructed of first-class STAINLESS STEEL, Screen Splash Proof, anti-rust, which has a strong frame with lockable head. The housing is made of metal with silver paint on the surface. Note: please do not install the battery backwards..
  • 【3 Units Conversion】 You can switch 3 units with the digital micrometer: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
  • 【4 Measuring Ways】 This digital caliper measuring tool is easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries. Auto shutdown for saving battery after within 6 minutes if without operation..
Check Stock

Kynup Digital Caliper Calipers 6 Inch Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 150mm

  • ...easuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries.
  • 【Wide Application & Auto Off】The 6 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists, woodworkers, DIY. Auto shutdown for saving battery after within 6 minutes if without operation.
  • 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which has a strong frame with lockable head. The housing is made of metal with silver paint on the surface..
Check Stock

Metric Micrometer

  • 【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
  • 【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
  • 【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
  • 【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
  • 【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....
Check Stock

Powermatic TS29 Wood Shaper, 7.5 HP, 3Ph 230/460V (1791284)

  • Full coverage guard with workpiece hold downs.
  • Fully adjustable fence has dual digital readout positioning with micrometer adjustments.
Check Stock

Mitutoyo 570-227 LCD Absolute Digimatic Height Gauge, SPC Output, 0-200mm Range, 0.01mm Resolution, -0.03mm Accuracy, 1.4kg Mass

  • Measurement range of 0 to 200 mm, and precise to 0.01 mm.
  • LCD digital readout displays sharp figures for viewing ease.
  • Weighs approximately 3 lbs/1.4 kg and is compact, for measuring small objects in the field.
  • Hand-operated slider with fine-adjustment carriage for precise feed.
  • Statistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer.
Check Stock

VEVOR Micrometer Set 0-6' Machinist Tool Micrometer Set 0.0001' Accuracy 6 Pcs Precision Machinist Tool Set Micrometer, Laser-Etched Micrometer with Calibration Standards, Wrench

  • [ 6 Pcs Micrometer Set ]: Micrometer set includes 6 micrometers with measuring range: 0-6" (0-1"/1-2"/2-3"/3-4"/4-5"/5-6"),and microfine Graduations is 0.0001",also the accuracy is 0.0001",ensure a precise measurement every time..
  • [ Calibration Standards & Wrench ]: The micrometer set comes with 5 calibration standards and 1 adjustment wrench,which provides you precise adjustment solutions..
  • [ Precision Machinist Tool ]: It works with high accuracy of 0.0001'', Micro-lapped carbide tipped measuring face make more accurate reading,and the laser-etched graduations will never fade..
  • [ Durable Material Micrometer ]: The outside micrometers are made of heat and corrosion resistant cemented carbide and cast Iron, which makes it work perfect in different condition. Satin chrome finish on thimble and sleeve is rustproof and reducing glare..
  • [ Wide Application for Your Needs ]: This outside micrometer set is ideal for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools etc,help you measure the outside dimensions of raw materials, whole workpieces and more of metalworking and other industrial measure needs..
Check Stock

Mitutoyo 570-312, HDS Digimatic Height Gage, 12\ X .0005\/0.01mm, With Output

  • Measurement range of 0” - 12"/0 - 300 mm, and precise to 0.0005”/0.01 mm.
  • LCD digital readout displays figures in inches or metric units for viewing ease.
  • Hand-operated feed wheel for measurement ease.
  • Electrostatic capacitance linear encoder helps ensure repeatable, precise measurement.
  • Statistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer.
Check Stock

Mitutoyo 570-314, HDS Digimatic Height Gage, 24\ X .0005\/0.01mm, With Output

  • Measurement range of 0” - 24"/0 - 600 mm, and precise to 0.0005”/0.01 mm.
  • LCD digital readout displays sharp figures in inches or metric for viewing ease.
  • Hand-operated feed wheel for measurement ease.
  • Electrostatic capacitance linear encoder helps ensure repeatable, precise measurement.
  • Statistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer.
Check Stock

Mitutoyo 570-313, HDS Digimatic Height Gage, 18\ X .0005\/0.01mm, With Output

  • Measurement range of 0” - 18"/0 - 450 mm, and precise to 0.0005”/0.01 mm.
  • LCD digital readout displays sharp figures in inches or metric for viewing ease.
  • Hand-operated feed wheel for measurement ease.
  • Electrostatic capacitance linear encoder helps ensure repeatable, precise measurement.
  • Statistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer.
Check Stock

Mitutoyo 192-670-10, Digimatic Height Gage, 12"/300mm X .0005"/.0002"0.01mm/0.005mm, With Output and Touch Probe Port

  • Measurement range of 0” to 12” (0 to 300 mm), with selectable resolution of 0.0005” (0.01mm) or 0.0002” (0.005mm).
  • LCD digital readout displays sharp figures in inches or metric for viewing ease.
  • Hand-operated feed wheel for measurement ease, selectable for coarse or fine travel.
  • Statistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer.
  • Works with a plug for an electronic touch probe (sold separately) for efficient digital measurement.
Check Stock

Premium Outside Micrometer Set 0-4\ / 0.0001\ (0-1\/1-2\/2-3\/3-4\) Precision Machinist Tools w/Carbide Tips, Standards, Ratchet Stop

  • HIGH-PRECISION MEASURING TOOL SET: Set includes a 4 carbide outside micrometers, calibration standards, and adjusting wrenches packaged neatly in a padded hard shell case. Every order you will receive a set of 0-1" / 1-2" / 2-3" / 3-4" outside micrometers with microfine Graduations: 0.0001" and Accuracy: ±0.0001" for precise readings every time.
  • FRICTION/RATCHET-STOP THIMBLE: Each micrometer has a metal ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. To Prevent over tightening the constant-force mechanism stops the micrometer’s spindle from tightening once it contacts the surface of the measured object.
  • EXCLUSIVE RED COLOR FINISH: We believe your tools should work great and be something you're proud to display. That's why we have designed this exclusive Direct-Reading Vernier Scale Micrometer set unlike any of the others. The red textured design and satin chrome thimble helps resist rust, reduce glare and are easily identifiable in your shop.
  • WIDE VARIETY OF USES: This Outside Micrometer Set is Perfect for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools. Sandor Tools Outside Micrometers help you measure the outside dimensions (OD) of raw materials, whole wo....
Check Stock

Digital Caliper, M MOOCK 0-6 inches Calipers Measuring Tool, Electronic Digital Micrometer Vernier Caliper with Stainless Steel Body, Large LCD Screen, Inch Millimeter Fractions Conversion/Green

  • ... frame with knurled thumb roller and new processing of depthometer's groove give better looking, smooth sliding, and accurate result..
  • 【Precision and Accurate Measurement】：With an accuracy within ±0.0005inch/0.01mm, this digital caliper has been a great helper for both professionals and home use；The digital micrometer glides smoothly and allows you to set zero and measure at any point of scale； Smooth and brushed stainless thumb roller easily and precision measurement..
  • 【Three Unit Conversion & Four Measurement Mode 】: It is easy to operation of unit conversion,one button quick change between three measuring modes inch/fractions/millimeter.
  • You can measure the internal, external dimensions, diameters, depth and steps with just one measuring tool. [Attention]：If there is a flickering screen, inaccurate reading, etc. that makes the caliper not work properly, please contact customer service and we will actively solve the problem for you..
  • 【Extra Large LCD Display】: Comes with a large easy-to-read LCD screen that shows instant readings with digital numbers, makes it so much more convenient than any vernier caliper or micrometer caliper.
  • Auto Shut Off after 5 minutes of no operation.
  • There is a protective film on the LCD screen to protec....
Check Stock

Fowler 52-229-214-0 Economy Outside Micrometer Set with 0–4 Range (Set of 4)

  • Micrometer Set: With flat anvil/spindle for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • High Accuracy Micrometer Set: Anvils and spindles are hardened and precision ground with microlap finish on tips.
  • 0.256" diameter, 0.00003" flatness, and 0.00005" parallelism on 0 to 1" micrometer for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive locking nut on spindle.
  • Ratchet stop thimble applies constant measuring force for repeatability between users.
  • Satin Chrome Finish: On the thimble and sleeve to help reduce rust and glare, lapped spindle thread that provides smooth movement and extends product life.
  • Set Includes: Outside micrometers of 0 to 1 inch, 1 to 2 inches, 2 to 3 inches and 3 to 4 inches.
  • 1 inch, 2 inches, and 3 inches standard, a wrench, and a fitted case.
Check Stock