Categories

Best Mobile Industrial Lighting Tower

EUREKA ERGONOMIC Z Shaped Gaming Desk with Height Adjustable Computer Tower Stand, 60 Inch Gaming Desk,Large Home Office Desk for Computer Home Office

  • ... [Large Gaming Surface] – The Eureka desk has a wide 60.5 inch carbon fiber textured desktop with plenty of surface for your gaming monitors, gaming keyboard, and other gaming gear.
  • The surface measures 60” wide by 24” deep, supports up to 500LBS.
  • [Dynamic Rgb Lighting] – The side armor has RGB LED lights to give you the best gaming experience possible. Pick your favorite color or dynamic RGB multi-color light show. Experience your game like never before.
  • 【Height Adjustable Tower Stand】Unique manual height adjustable range from 22 9/16'' to 32 11/16'' allows you to store tower under your desk or next to your table, support most computer cases on the market including full tower ATX case. Customize height to increase distance between the computer tower and upper layer to speed up heat dissipation.
  • 【Multifuctional Design】Efficient 2-tier design. The bottom layer stores the PC tower while the upper layer holds printers, plants, documents, and magazines. Pegboard on back organizes office supplies such as power strips, etc. Mousepad included, this CPU stand can be used for mouse operatio....
Check Stock

Baomain Alarm Warning Continuous Light 110V AC Industrial Buzzer Red LED Signal Tower Lamp

  • A new generation of Industrial Signal Stack Tower Lights, adopting high performance LED chips, provide high brightness light source with low power consumption and 100,000 hours lifespan, no need to replace the light source all the life.
  • This Tower Light equipped with prism-cut PC lampshade lenses for even light distribution, it has a 360-degree viewing angle, can be viewed easily at a distance.
  • Each tier of lights can be switched to continuous or flashing light modes as needed.
  • Rated IP54 against dust and moisture, NEMA 5 for industrial exposed environment.
  • These tower lights rated IP54 against dust and moisture for industrial exposed environment, integrated 80db alarm buzzer(Optional).
Check Stock

sleeri Backflow Cone Incense Tweezers, Incense Cone Clip, Tower Incense Clamp - Stainless Steel Curved Pointed Fine Tip Tweezers for Pick Up Backflow Cone Incense

  • Practical way of handling the hot Backflow Cone Incense without burning fingers. To hold the backflow cone incense/tower incense while lighting them. A must have tool for anybody with backflow cone incense/tower incense burner in their home or on their altar.
  • Designed for burning cone incense. No more burned finger tips, perfect for holding the backflow cone incense/tower incense.
  • Great for transferring hot backflow cone incense/tower incense to the incense burner. Good for pick up hot backflow cone incense/tower incense. Adjusting your backflow cone incense/tower incense easier and more convenient.
  • Very helpfull to pick up backflow cone incense/tower incense and is very small and handy, definitely ideal for handling and lighting up the backflow cone incense/tower incense and picking up the backflow cone incense/tower incense. Makes that job so much easier to hold the backflow cone incense/tower incense.
  • Material: stainless steel. Product SIZE: approx. 4.92inch/12.5CM Length.
Check Stock

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

  • ...ght Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are looking for a Completely Assembled Andon Light System, Please Search on Amazon for "Signaworks LED Andon Tower Lights" that are Fully Assembled and Plug-and-Play Ready. as well as other other Industrial Signal Products.
  • ASSEMBLY REQUIRED - This kit is for someone who can wire electric circuits such as switches and lights using 120 VAC power. Assembly requires cutting and stripping wires, crimping connectors, wire termination, mechanical assembly and testing. This kit will assist in building a custom andon system for your needs including conduit for power, control wiring or direct connection between light and switch box. (For Fully Assembled Units, search Amazon for "Signaworks ASTL Andon Tower Lights".
Check Stock

Liitrton Computer Tower Stand, 2-Tier CPU Stand PC Stand with Lockable Wheels Under Desk for Office Home (L)

  • Sturdy: The computer tower stand is made of high-strength iron, which can easily support your PC case to move on the ground. The iron frame is firmly supported without deformation, and the surface has a unique coating, which can well protect your computer tower..
  • Suitable for Most Computer Towers: PC stand size: 22.24"Lx13.78"Wx22.83"H, which can support most desktop/tower computers on the market..
  • Mobile CPU Stand: Four 360-degree rotating universal wheels are easy to move, and can be easily moved on the carpet, designed to improve mobility and stability. And the casters with brakes can stay still when in use, making it easy to clean the ground..
  • Efficient and Practical Tower Stand: Save space by storing the CPU under or next to the table. A proper heightening distance can lift the computer tower off the ground, increasing the airflow at the bottom and speeding up heat dissipation, allowing the computer tower to breathe freely..
  • 2-Tier PC Tower Stand: Our CPU holder adopts a two-layer design concept. The bottom layer stores the host computer, and the upper layer can store office supplies such as printers, potted plants, magazines, and can also be used as a mobile luggage cart..
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...ght Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are looking for a Completely Assembled Andon Light System, Please Search on Amazon for "Signaworks LED Andon Tower Lights" that are Fully Assembled and Plug-and-Play Ready. as well as other other Industrial Signal Products.
  • ASSEMBLY REQUIRED - This kit is for someone who can wire electric circuits such as switches and lights using 120 VAC power. Assembly requires cutting and stripping wires, crimping connectors, wire termination, mechanical assembly and testing. This kit will assist in building a custom andon system for your needs including conduit for power, control wiring or direct connection between light and switch box. (For Fully Assembled Units, search Amazon for "Signaworks ASTL Andon Tower Lights".
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...ght Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are looking for a Completely Assembled Andon Light System, Please Search on Amazon for "Signaworks LED Andon Tower Lights" that are Fully Assembled and Plug-and-Play Ready. as well as other other Industrial Signal Products.
  • ASSEMBLY REQUIRED - This kit is for someone who can wire electric circuits such as switches and lights using 120 VAC power. Assembly requires cutting and stripping wires, crimping connectors, wire termination, mechanical assembly and testing. This kit will assist in building a custom andon system for your needs including conduit for power, control wiring or direct connection between light and switch box. (For Fully Assembled Units, search Amazon for "Signaworks ASTL Andon Tower Lights".
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • ...ght Station Yourself can be a Cost Savings and Provide you with the Exact Signaling Solution you are looking for. If you are looking for a Completely Assembled Andon Light System, Please Search on Amazon for "Signaworks LED Andon Tower Lights" that are Fully Assembled and Plug-and-Play Ready. as well as other other Industrial Signal Products.
  • ASSEMBLY REQUIRED - This kit is for someone who can wire electric circuits such as switches and lights using 120 VAC power. Assembly requires cutting and stripping wires, crimping connectors, wire termination, mechanical assembly and testing. This kit will assist in building a custom andon system for your needs including conduit for power, control wiring or direct connection between light and switch box. (For Fully Assembled Units, search Amazon for "Signaworks ASTL Andon Tower Lights".
Check Stock

Signaworks 2 Stack LED Andon Tower Light Off-Steady On Red/Green 8 ft Industrial Power Cord Plug & Play Ready 3 Prong Plug Meets OHSA Standard * Made in USA *

  • Signaworks 2Stack LED Andon Light Station - Complete Industrial Rated Andon Tower with 8' Long 3 Prong Power Cord to Meet OSHA Standards, 2 Switches for Steady OFF-ON Operation, Switch Box, Pole, & Lights for Plug & Play Ready Operation- Indoor Rated.
  • High Brightness Lights - 2.25 Inch Diameter Super Bright LED Tower Light with 24 LEDs for Red & 18 Larger LEDs for Green with 12 Sided Polycarbonate Lens for Ultimate Visibility on the Factory Floor or Commercial Environment..
  • Industrial Construction - Rugged Through Bolt Light Design, Heavy Gauge Steel Right Angle Bracket with 2 Bolt Mounting Holes, 18/3 Prong AWG 300V Industrial Power Cord, 12 inch Long Pole, 2 Industrial Off-On Selector Switches - Do Not Settle for Cheap Substitutes on Lights, Power Wires, Brackets or Poles..
  • Simple to Mount - Use 2 Mounting Bolts in Right Angle Bracket, Plug in 18 AWG, 3 Prong Power Cord to 120VAC Outlet & You are Up & Running..
  • Signaworks is a family owned business in Powell, Ohio and has been the Industry Leader in Andon Lights since we pioneered the First Industrial Andon Tower Light in 1996. Still * MADE IN THE USA * We are here to Service You or Answer Any Questions you have with Real English Speaking People. Look for More Signaworks Lean Manufa....
Check Stock

Signaworks 3 Stack Super Bright LED Andon Tower Light 3 Pos On-Off-Flash Red/Amber/Green 8 ft Industrial Power Cord Plug & Play Ready 3 Prong Plug Meets OHSA Standard * Made in USA *

  • Signaworks 3 Stack LED Flashing Andon Light Station - Complete Industrial Rated Andon Tower with 8' Long 3 Prong Power Cord to Meet OSHA Standards, 3 Switches for ON-OFF-FLASH Operation, Switch Box, Pole, & Lights for Plug & Play Ready Operation- Indoor Rated.
  • High Brightness Lights - 2.25 Inch Diameter Super Bright LED Tower Light with 24 LEDs for Red & Amber and 18 Larger LEDs for Green with 12 Sided Polycarbonate Lens for Ultimate Visibility on the Factory Floor or Commercial Environment..
  • Industrial Construction - Rugged Through Bolt Light Design, Heavy Gauge Steel Right Angle Bracket with 2 Bolt Mounting Holes, 18/3 Prong AWG 300V Industrial Power Cord, 12 inch Long Pole, 3 Industrial On-Off-Flash Selector Switches - Do Not Settle for Cheap Substitutes on Lights, Power Wires, Brackets or Poles..
  • Simple to Mount - Use 2 Mounting Bolts in Right Angle Bracket, Plug in 18 AWG, 3 Prong Power Cord to 120VAC Outlet & You are Up & Running..
  • Signaworks is a family owned business in Powell, Ohio and has been the Industry Leader in Andon Lights since we pioneered the First Industrial Andon Tower Light in 1996. Still * MADE IN THE USA * We are here to Service You or Answer Any Questions you have with Real English Speaking People. Look for Mo....
Check Stock

Adesso 3226-15 Brooklyn Table Lamp, 29.5 in, 100 W Incandescent/ 26W CFL, Walnut Wood, 1 Table Lamp

  • Industrial Table Lamp with 2 Phone holders & Storage Boxes: This USB table lamp with practical storage Design can holding a variety of items such as remote controls & keys, which can make your table tidier and save you more space. Besides, the two Phone slots can hold your phones, Ipads, kindles or other devices and it's more convenience for watching videos with this industrial dimming lamps..
  • Fully dimmable lamp Design: Our Dimmable bedside lamp with usb port can be adjusted the 0-100% brightness from dark to bright, meeting your lighting needs in various situation. You can simply rotate the switch on the base of bedside lamps for living room to select the brightness as your will. The Low mode is good for rest and High mode is very bright enough to work..
  • Minimalist nightstand lamp with USB Ports:The lamp for bedroom with white glass shade has 2 USB charging ports on the dimmable bedside lamp industrial base and It is so convenient to charge your mobile phones, iPad, laptops, kindle reader and other electronic devices whether the bedroom lamps is on or off..
  • Energy Saving Dimmable LED Bulb Included:The industrial lamps for bedroom comes with A19 6W 2700K LED Warm White bulb with 750 lumen brightness. Energy saving and no flicker, no buzzing and less he....
Check Stock

Signaworks 3 Stack Super Bright LED Andon Tower Light, Off-Steady, Red/Amber/Green, 8 ft Power Cord, Plug & Play Ready, 3 Prong Plug Meets OHSA Standard * Made in USA *

  • Signaworks 3 Stack LED Andon Light Station - Complete Industrial Rated Andon Tower with 8' Long 3 Prong Power Cord to Meet OSHA Standards, 3 Switches for Steady OFF-ON Operation, Switch Box, Pole, & Lights for Plug & Play Ready Operation- Indoor Rated.
  • High Brightness Lights - 2.25 Inch Diameter Super Bright LED Tower Light with 24 LEDs for Red & Amber and 18 Larger LEDs for Green with 12 Sided Polycarbonate Lens for Ultimate Visibility on the Factory Floor or Commercial Environment..
  • Industrial Construction - Heavy Gauge Steel Right Angle Bracket with 2 Bolt Mounting Holes, 18/3 AWG 600V Power Cord, 12 inch Long Pole, 3 Industrial Off/On Selector Switches - Do Not Settle for Cheap Substitutes on Brackets, Power Wires, Lights or Poles..
  • Simple to Mount - Use 2 Mounting Bolts in Right Angle Bracket, Plug in 18 AWG, 3 Prong Power Cord to 120VAC Outlet & You are Up & Running..
  • Signaworks is a family owned business in Powell, Ohio and has been the Industry Leader in Andon Lights since we pioneered the First Industrial Andon Tower Light in 1996. Still * MADE IN THE USA * We are here to Service You or Answer Any Questions you have with Real English Speaking People. Look for More Signaworks Lean Manufacturing Productivity Tools on Amazon.
Check Stock

Signaworks 4 Stack Super Bright LED Andon Tower Light, Off-Steady, Red/Amber/Green/Blue, 8 ft Power Cord, Plug & Play Ready, 3 Prong Plug Meets OHSA Standard * Made in USA *

  • Signaworks 4 Stack LED Andon Light Station - Complete Industrial Rated Andon Tower with 8' Long 3 Prong Power Cord to Meet OSHA Standards, 4 Switches for Steady OFF-ON Operation, Switch Box, Pole, & Lights for Plug & Play Ready Operation- Indoor Rated.
  • High Brightness Lights - 2.25 Inch Diameter Super Bright LED Tower Light with 24 LEDs for Red & Amber &18 Larger LEDs for Green & Blue with 12 Sided Polycarbonate Lens for Ultimate Visibility on the Factory Floor or Commercial Environment..
  • Industrial Construction - Heavy Gauge Steel Right Angle Bracket with 2 Bolt Mounting Holes, 18/3 AWG 600V Power Cord, 12 inch Long Pole, 3 Industrial Off/On Selector Switches - Do Not Settle for Cheap Substitutes on Brackets, Power Wires, Lights or Poles..
  • Simple to Mount - Use 2 Mounting Bolts in Right Angle Bracket, Plug in 18 AWG, 3 Prong Power Cord to 120VAC Outlet & You are Up & Running..
  • Signaworks is a family owned business in Powell, Ohio and has been the Industry Leader in Andon Lights since we pioneered the First Industrial Andon Tower Light in 1996. Still * MADE IN THE USA * We are here to Service You or Answer Any Questions you have with Real English Speaking People. Look for More Signaworks Lean Manufacturing Productivity Tools on Amazon..
Check Stock