Best Mobile Spot Welder

GLITTER 801B Battery Spot Welder 11.6 KW Capacitor Energy Storage Spot Welding Machine, Mini Portable Precision Pulse Battery Welding Equipment for 18650, 14500 Lithium Battery Pack Building

...The portable welder has a small size and light weight, allowing for easy transport while still adopting 100-240 V wide-voltage input for use anywhere you need. Comparing to the traditional big size and heavy spot welding machine, it is smaller and lighter, but more powerful and reliable..
Equipped with the 70B mobile welding pen, 73S handle-push welding arm and ‘AT/MT’ two welding modes, you can finish the welding work easily and efficiently, the welding spot is nice and elegant. The capacitor energy-gathered pulse technology and low power consumption enable you to use the machine for 12 hrs efficient welding work with no heating problems..
The pulse welding power can be set up conveniently via two adjusting buttons(0-99 range), which is shown directly on the panel LED screen(welding power/capacitor voltage/actual welding current are displayed). The maximum welding energy is 119 J, 0.35mm nickel plated and 0.3mm pure nickel can be easily welded..
Used in batteries、metal hardwares, electronic components spot welding work.

Check Stock

Spot Welder, Seesii 11000mA-h Battery Spot Welder with LCD Screen Upgraded Enhanced 80 Gears Adjustable Portable Mini Spot Welder with 2x5M Nickel Sheet & 4X4 Holder For Making Battery Packs

✅【Upgraded Enhanced Battery Spot Welder】: This mini spot welder enhances the battery energy storage capacity to 11000mAh, power-bank design, with type-C charging cable,can be fully charged within 3-5 hours,and it can continuously weld thousands of points after being fully charged.Most importantly, the upgraded spot welder can easily weld 0.1-0.15mm thick nickel sheets, which can help you make a perfect battery packs,(Note:Cannot weld nickel strips with a thickness of 0.2mm)..
✅【80 Levels of Adjustable Output】: Our Seesii spot welder SE-002 with 80 levels output power adjustable,it can be adjusted 1-8 and 1.1-5.4-8.0 levels according to your different needs,very fine adjustments can make the welding more precise and the spot welding effect more perfect.If you are a new learner you can adjust the delay time to delay the automatic weld time( 1-5s）, it’s very friendly for the beginner..
✅【LCD Visible Screen Display】: Our spot welder for battery is 2022 newly designed with visible colorful LCD Screen, can clearly know the remaining battery, delay time, temperature and gear level of the spot welder.The working condition of the product can be understo....

Check Stock

Spot Welder Seesii Farad Capacitor Battery Spot Welder 3000F 120 Gears Adjustable Capacitor Energy Storage Portable Spot Welder Support 0.1-0.3mm Nickel Strip Spot Welding for Battery Pack Making

✅【High Quality Spot Welder】:This spot welder is powered by two imported Farad capacitors,controlled by high-performance MCU,and supports functions such as automatic working mode,output power adjustment, delay setting, circuit board temperature monitoring and high temperature reminder. Compared to a traditional ac spot welder, it does not interfere with the electric circuit, which means no more tripping problems. It is designed for professional workers and DIY enthusiasts..
✅ 【120 Levels Adjustable】: Our spot welder equipment with 120 gears output power adjustable, which can be adjusted conveniently by rotating the button(0-120 range).You can adjust the spot welding accuracy according to different needs, the more accurate the adjustment, the more perfect the spot welding effect..
✅ 【Enhanced 0.1-0.3mm Battery Spot Welder】:The SE202 battery spot welder is equipped with two super capacitance, can easily weld 0.1-0.3mm thick nickel sheets, you can finish the welding work easily and efficiently, the welding spot is nice and elegant. Can be used for spot welding of batteries, hardware, and electronic components..
✅ 【Unique & Innovative Design】: Different from other handheld spot welder on the market, our newly designed machine wil....

Check Stock

Spot Welder, 11000mAh Battery Spot Welder with LCD Screen Upgraded 80 Gears Adjustable Portable Mini Spot Welder for Battery Plate Welding with Long Spot Welding Pen & 5M Nickel Strip

✅【UPGRADE ENHANCED BATTERY SPOT WELDER】This mini battery spot welder increases the energy storage capacity of the battery to 11000mah. The spot welder is designed with a C-type charging cable, which can be fully charged within 3-5 hours and can continuously weld thousands of fully charged points. The most important thing is that the upgraded spot welder can easily weld nickel/iron/steel sheets with a thickness of 0.1-0.2mm..
【UPGRADED LCD VISUAL SCREEN DESIGN】Our DIY spot welding machine was newly designed in 2023. With a visible color LCD screen, you can understand the remaining power, delay time, temperature and gear of the spot welding machine. You can know all the working states of mini spot welder at a glance through the screen, making your spot welding work easier and safer..
✅【80 LEVEL ADJUSTABLE OUTPUT】Our small spot welder has 80 level adjustable output power, which can be adjusted to 1-7 and 1.1-5.4-8.0 levels according to your different needs. Fine adjustment can make the welding more accurate and the spot welding effect more perfect. If you are a beginner, you can adjust the delay time to delay the automatic welding time (1-5s), which is ....

Check Stock

Permanent Jewelry Welder by Sunstone Welders Orion mPulse 30 Pulse Arc Permanent Jewelry Welder with Touch Screen Interface

THE PERFECT PERMANENT JEWELRY SOLUTION: The Orion mPulse is the perfect, mini welder for closing links on fine chain. A low price, easy interface, and small, mobile footprint make the mPulse the welding machine of choice for permanent jewelry artists..
PRECISION AND POWER: Multiple options let you select power in 1 Ws increments from 3 Ws to 30 Ws. Weld spot sizes range from 0.5mm to 1.5mm. With a touchscreen display, this advanced permanent jewelry welder kit provides precision with every weld..
USA QUALITY: Take confidence in knowing that your Orion mPulse spot welding machine jewlry torch was designed, produced, and assembled to the highest quality standards in the industry..
EASY-TO-USE TOUCH SCREEN: The Orion permanent jewelry welder's touch screen provides precise control over energy with an easy to use interface. No knobs or dials--just one touch to make a change. A small welding machine with simple functionality..
15 YEARS SERVICE: In business for 15+ years, we provide US-based support before, during, and after the sale. While our customers love our welders, they rave about our customer service..

Check Stock

Battery Spot Welder, Faiuot 11.6 KW Capacitor Energy Storage Pulse Welding Machine, Portable Precision Spot Welding Equipment with 70A Welding Pen for Battery Pack Building

【Upgraded Capacitor Energy Storage Spot Welder】The newly designed battery spot welder is equipped with two super capacitors for energy storage and power supply for pulse welding. Compared to a traditional AC spot welder, it does not interfere with the electric circuit, which means no more tripping problems..
【Smart Panel & Multifunction】Equipped with intelligent display control panel, the output voltage can be flexibly adjusted according to the thickness of different weldments, with induction spot welding and quick-plug spot welding pen connection sockets, a series of spot welding pens can be selected according to different welding needs, so as to achieve fast Spot welding to improve work efficiency..
【Efficiency & Large Capacity】 The machine’s super energy-gathered pulse technology combines with a max welding power of 11.6 KW to provide a reliable welding effect. With 1-199V voltage detection function, it can quickly detect the voltage value of the welding battery. Capacitors have the long lasting work time and large capacity, enabling low-efficiency and high-output battery life..
【70A Welding Pen & Automatic Mode】 Equipped with the 70A separated-style spot welding pen and ‘AT’ automatic welding mode, this machine allows you to wo....

Check Stock

5000W Handheld Spot Welder, Docreate Portable Spot Welder Machine DIY Kit for 18650 Battery Pack Welding Tools, Adjustable Battery Welding Soldering Machine with Nickel Strip and Spot Welding Pen

...machine is good performance and long service life. Which is ABS shell material, surface anodizing technology, anti-abrasive and safe to use. The spot welding machine is come with welding pen with good conductivity and low contact resistance..
Portable Design:This mini spot welder equipment is Portable and lightweight, space-saving in home, and you can transport your spot welder to different job locations easily and quickly..
High-Efficiency: The adjustable spot welder can weld thousands of points continuously on nickel sheet after full charge,the solder pins of the adjustable spot welding machine can be removed and replaced, easy installation and operation..
Easy to Operate: The DIY battery spot welder machine is foot switch controls welding, spot welding is more arbitrary. Just press the nickel belt with two soldering pens and step on the foot switch. Wait for about 0.5 seconds for output spot welding,then release the foot switch.suitable for precise welding..
Wide Application & Warranty: The spot welder with large output power can be used to connect nickel strips of 18650 li....

Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 9 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..

Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..

Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5000mAh for DIY Battery

【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..

Check Stock

Spot Welder With Clear LCD Screen Faiuot Upgraded 10000mAh Portable 30 Gear Adjustable Spot Welder Machine Spot Welding Equipment Energy Storage for DIY Battery

【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include welding gears, welding delay and pulse number on the OLED display of the welding machine, also with the real-time temperature clearly..
【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 0.1-0.15mm thick nickel strip, ultra-low internal resistance, increased over current capacity..
【10000mAh Battery & Power Bank Function】With 10000mAh battery, this mini spot welder can be fully charged within 3 hours. It can continuously weld thousands of points after being fully charged with max output 800A. And it can be also used as power bank when you need to charge..
【40cm Welding Pen & 30 Gears Adjustable】 The spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 70-speed output power adjustable, welding is more precise and the w....

Check Stock

Spot Welder, 11000mAh Battery Spot Welder with LCD Screen, 80 Gears Adjustable Portable Mini Spot Welder With Type-C Port, Nickel Strip and USB Charging Cable for Battery Pack Spot Welding

【Upgraded LCD Screen】The spot welder is made of high-quality aluminum alloy material with an anodized welding machine surface, which is wear-resistant and fireproof to use. Newly upgraded LCD screen can clearly know the system's internal temperature, charging status, remaining battery, gear level, and time interval of the spot battery welder..
【80 Gears Adjustable】This portable spot welder with 80-speed output power adjustable(Coarse and Fine Adjustment Button to Adjust). 1.0-2.9 gears suitable for thin nickel sheet.
3.0-6.5 gears suitable for medium thickness nickel sheet.
6.5-8.0 gears suitable for thick nickel sheet, iron sheet and steel sheet. Very fine adjustments can make the welding more precise and the spot welding effect more perfect..
【11000mAh Power Bank Function 】This portable spot welder, built in 11000mA-h rechargeable polymer lithium battery,can be fully charged within 3-5 hours with 5V/2.1A type c charging port and it can continuously weld thousands of points after fully charged . The battery spot welder can be also used as a power bank for electronic products charging with USB outport .The welding machine will shut off automatically....

Check Stock

Spot Welder with LCD Screen, 70 Gears Adjustable DIY Battery Spot Welding Equipment Portable Mini Spot Welder for Battery, Built-in 7500 mAh Rechargeable Battery, Type-C Port, Nickel Strip & USB Cable

【Upgraded LCD Screen】MIXILIN spot welder is made of high-quality aluminum alloy material with an anodized welding machine surface, which is wear-resistant and fireproof to use. Newly upgraded LCD screen can clearly know the system internal temperature, charging status, remaining battery, gear level and time interval of the spot battery welder..
【70 Gears Adjustable】Mini spot welder with 70 gears adjustable output power design, it can satisfy more professional welding demands. 1.0-2.9 gears suitable for thin nickel sheet.
3.0-6.5 gears suitable for medium thickness nickel sheet.
6.5-8.0 gears suitable for thick nickel sheet, iron sheet and steel sheet. Very fine adjustments can make the welding more precise and the spot welding effect more perfect..
【Built-in 7500 Ma-h Rechargeable Battery】Portable spot welder built in 7500mA-h high-rate rechargeble battery,with type-C charging cable,can be fully charged within 3 hours, and it can continuously weld about 2000 points after being fully charged. It also can be used as a power bank when you need charging during traveling or outgoing, support 2.4A fast charging..
【40cm Welding Pen & Safe to Use】The gold-plate spot-welding pen consists of multiple strands of high temperature wire, with fine con....

Check Stock