Categories

Best Modbus Protocol

EPEVER 100a mppt Solar Charge Controller, 12v/24v/36v/48v Auto Max 150V 7500W Input Power fit for Sealed/Gel/Flooded(Tracer10415AN)

  • Tracer AN series adopts Negative Ground Design controller.
  • 12V/24V/36V/48V Auto identifying system voltage, 100 amps mppt controller..
  • Support 4 battery charging: Sealed, Gel, Flooded and User. Battery temperature compensation function..
  • RS-485 communication bus interface and Modbus communication protocol let this mppt Solar Charge Controller available meet various communication requirements in different situations..
Check Stock

0-25L/min Gas Mass Flow Meter Compressed Air Nitrogen Oxygen Tester MF5712 Digital Gas Air Nitrogen Oxygen Mass Flow Meter Gas Air Flow Rate Tester MF5706 Compressed Air Digital

  • Ultra low power by batteries or optional external AC adaptor - Potable design with rotatable meter head and easy exchangeable mechanical adaptors.
  • Customizable flow range with over 30:1 turn-down.
  • Rs485 Modbus protocol ready for networking.
  • User programmable range alarm for safety and other monitoring/control functionality.
  • - Internal data storage for additional data safety - Hygienic and oxygen safe copper body for various fluids.
Check Stock

Ep.#2.3 - "Resurrection" (The Frontiers Saga - Part 2: Rogue Castes Book 3)

  • ✦Tracer-AN series support PC software, APP and MT-50 to monitor or set the parameters. Automatically identifying 12/24/36/48V DC system voltage, compatible with various battery options: Sealed, Gel, Flooded and Lithium..
  • ✦Maximum input current: 100A. Maximum PV input power: 1250W/12V.
  • 5000W/48V. Maximum input voltage(open circuit voltage): 150V. Common negative grounding..
  • ✦Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%.
  • maximum DC/DC transfer efficiency is as high as 98.6%, full load efficiency is up to 98%..
  • ✦With Battery temperature compensation function, real-time energy recording and statistical function. Hundred percent full load operation in working environment temperature range within charging & discharging..
  • ✦The isolated RS485 interface with standard MODBUS communication protocol support up to 8 charging in parallel, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring etc..
Check Stock

Madeline - The Best Episodes Ever - Madeline and the 40 Thieves/Madeline and the New House (Vol. 2) [DVD]

  • ✦Tracer-AN series support PC software, APP and MT-50 to monitor or set the parameters. Automatically identifying 12/24/36/48V DC system voltage, compatible with various battery options: Sealed, Gel, Flooded and Lithium..
  • ✦Maximum input current: 100A. Maximum PV input power: 1250W/12V.
  • 5000W/48V. Maximum input voltage(open circuit voltage): 150V. Common negative grounding..
  • ✦Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%.
  • maximum DC/DC transfer efficiency is as high as 98.6%, full load efficiency is up to 98%..
  • ✦With Battery temperature compensation function, real-time energy recording and statistical function. Hundred percent full load operation in working environment temperature range within charging & discharging..
  • ✦The isolated RS485 interface with standard MODBUS communication protocol support up to 8 charging in parallel, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring etc..
Check Stock

EPEVER 100A MPPT Charge Controller 48V 36V 24V 12V Auto 100 amp Solar Controller MPPT Negative Ground Max 150V Input fit for Litium Sealed AGM Gel Flooded User Battery

  • Tracer AN series MPPT Charge Controller: 12V/24V/36V/48V Auto identifying system volt. Auto control system to limit the charging power & current go....
  • 100 amp Charge Controller Max Input Solar Panel Power: 1250W/12V, 2500W/24V, 3750W/36V, 5000W/48V. Max input Voltage: 150V. Real-time energy recording....
  • 100A Solar Controller MPPT support for 4 type Battery charging: Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User (Not for Lithium). Battery....
  • RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations..
  • Solar Regulator Mppt can be widely used for various applications, e.g. solar RV, household system and industrial field monitoring, etc. The stocks....
Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

LA2016 USB Logic Analyzer Full 16 channels 200MHz sampling rate with the English PC software handheld instrument, Support Windows (32bit/64bit),Mac OS,Linux

  • LA2016 is a high-performance logic analyzer with 16 full channels and 200MHz sampling rate..
  • It is composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc..
  • LA2016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved..
  • Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc....
  • Supported OS: MAC OS,Linux,Windows XP, Vista, Windows 7/8/10(32/64bit).
Check Stock

InnoMaker LA5016 USB Logic Analyzer 16Channels 500M Max Sample Rate 10GB Samples MCU/ARM/FPGA Debug Tool English Software Support Windows (32bit/64bit),Mac OS,Linux

  • LA5016 is a high-performance logic analyzer with 16 channels and 500M max sampling rate..
  • Composed of two parts: software on personal computer and hardware equipment. It has the advantages of high sampling rate, large sampling depth, easy to use, etc..
  • LA5016 can sample 16 digital signal at same time. Then the sampled data can be displayed, analyzed, exported and saved on the computer. Software can also decode the data if it conform to the standard protocol of the software supported. Then the decoded data can be displayed, exported and saved..
  • Supported standard protocols: UART/RS-232/485, I2C, SPI, CAN, DMX512, HDMI CEC, I2S/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, UNI/O, SDIO, SMBus, USB1.1, PS/2, NEC InfraRed, Parallel, etc….
  • Support OS: Support Windows (32bit/64bit),Mac OS,Linux.
Check Stock

EPEVER 60A MPPT Charge Controller 48V 36V 24V 12V Auto, 60 amp Negative Ground Solar Controller MPPT Max 150V Input fit for Litium Sealed (AGM) Gel Flooded User Battery

  • Negative Ground Tracer AN series MPPT Controller: 12V/24V/36V/48V Auto identifying system voltage. Auto control system to limit the charging power & current go over the rated value..
  • Max Input Current: 60 amp: Max Input Solar Power: 750W/12V 1500W/24V 2250W/36V 3000W/48V.
  • Real-time energy recording and statistical..
  • 60A Mppt Charge Controller support for 4 type Battery charging : Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User (couldn’t set Lithium). Battery temperature compensation function to ensure the controller’s life..
  • RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations..
  • The stocks starting from August 2020 are all upgraded versions that support lithium batteries.Please always connect the battery before connect the solar panel..
Check Stock

EPEVER 100A MPPT Solar Charge Controller Tracer-an Series High-Power Charge Controllers Compatible with 12V/24V/36V/48V Lead-Acid and Lithium Batteries (100A)

  • ✦Tracer-AN series support PC software, APP and MT-50 to monitor or set the parameters. Automatically identifying 12/24/36/48V DC system voltage, compatible with various battery options: Sealed, Gel, Flooded and Lithium..
  • ✦Maximum input current: 100A. Maximum PV input power: 1250W/12V.
  • 5000W/48V. Maximum input voltage(open circuit voltage): 150V. Common negative grounding..
  • ✦Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%.
  • maximum DC/DC transfer efficiency is as high as 98.6%, full load efficiency is up to 98%..
  • ✦With Battery temperature compensation function, real-time energy recording and statistical function. Hundred percent full load operation in working environment temperature range within charging & discharging..
  • ✦The isolated RS485 interface with standard MODBUS communication protocol support up to 8 charging in parallel, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring etc..
Check Stock

LA1010 USB Logic Analyzer, 16 Channels 100MHz Digital Logic Analyzer, Adjustable Threshold PWM Output, for Windows XP/7/8/10 (32bit/64bit), for Mac OS, Linux

  • BRIEF INTRODUCTION: 100M high sampling rate, 16 channels, 10G depth, multi-logic level threshold voltage adjustable. Supports multiple protocol parsers and integrates 2-channel PWM generators. Ideal tools for system development and debugging such as MCU, ARM, FPGA, etc..
  • POWERFUL SOFTWARE: The supporting software and resources can support Chinese and English, and the Chinese and English software languages can be adjusted. It supports for Windows XP/7/8/10, for Linux, for MAC OS and other operating systems. It is more powerful and better than oscilloscope in digital signal analysis..
  • BASIC PARAMETERS：Input channels number: 16.
  • Sampling rate: 100M@3CH, 50M@6CH, 32M@9CH, 16M@16CH.
  • USB 2.0 interface, Max sampling depth: 10G.
  • SUPPORTED STANDARD PROTOCOLS: UART/RS232/485, I2C, SPI, CAN, SDID, DMX512, I21/PCM, JTAG, LIN, Manchester, Modbus, 1-Wire, SMBus, UNI/O. USB1.1, NEC Infrared, parallel, PS/2, etc.
  • FEATURES: Data display in decimal/hexadecimal/2/ASCII format is convenient for observation and analysis. Both sampling data and analytical data can be exported, which is convenient for archiving or other analysis software..
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

Web Power Switch Pro Model

  • Rugged, reliable power control over the web. Industrial quality, 15A.
  • Secure web server with SSL, SSH, HTTPS, SNMP, REST API, MODBUS.
  • Simple web UI, or write your own script or program.
  • AutoPing feature to reliably reboot routers or APs.
Check Stock