Categories

Best Module Controller

CURT 51170 Spectrum Original Equipment Style, Integrated Electric Trailer Brake Controller, Proportional

  • FACTORY LOOK. The Spectrum trailer brake controller is designed to mount onto the dash of your vehicle and integrate with the other controls like a factory brake controller.
  • It allows you to control and monitor all brake settings using a simple knob. Compatible with low-volt, PWM, ABS, cruise control and electric over hydraulic.
  • To maintain powerful trailer brake operation without obstructing your vehicle dash, the computer module of this brake controller is separate from the control knob and can be mounted out of sight.
  • This trailer brake controller operates with an integrated circuit called a triple-axis accelerometer.
  • This circuit detects motion on three planes and provides braking power accordingly, up or down a hill.
  • The Spectrum electric brake controller is highly adjustable to accommodate different vehicles, trailers and loads.
  • The push-button knob offers easily accessible manual override whenever needed.
Check Stock

Liftmaster/Chamberlain/Sentex 41as050-1 Receiver Logic Board Assembly

  • There are 8 lighting modes for you to choose: 1: 2-8 function cycle,2: Star flash,3: Double flash,4: One way fades in and out,5: 4 single flashes, 4 double flashes,6: All fade in and out,7: 4 single flashes,8: All on..
  • It can be connected to a 1.2V nickel-metal hydride battery and a 2V solar panel. The maximum charge current is 400mA and the discharge current is 100mA..
  • Solar light string controller circuit board with power switch and lighting mode switch, easy to operate..
  • The controller module can be used for 100LED solar string lights, solar copper wire lights, solar studs and other lamps..
  • The solar light string controller module is made of glass fiber material, with fine workmanship and durability..
Check Stock

RGEEK 4Pack 3D Analog Stick Joystick Replacement for Playstion 4 PS4 Controller

  • Note:Needs moderate soldering. Professional installation is highly recommended, instruction and soldering tools are not included..
  • Compatibility: fit for PS4 /PS4 PRO / PS4 SLIM DualShock 4 controller..
  • Made of Plastic + Metal,it can make your controller work normally again.
  • A good replacement for your damaged or non-working 3D Joystick Axis Analog Sensor Module.
  • Packing included: 4 X 3D PS4 Analog Module.
Check Stock

EAGWELL 200 Pcs Super Bright 12V 1.44W 3 LED Module Lights 5050 SMD RGB Color Changing 100Ft Waterproof Light Lamp for Home Garden Xmas Wedding Party Decoration or Letter Design (RGB Injection)

  • 【High Grade Commercial LED Module】Up to 20 Lumen/led output a total of 2400 Lumens, 600pcs super bright Big SMD 5050 RGB LED bulb, Red,Blue,Green basic lighting effect, can change to 12 different kind color, adjust brightness and 4 Dynamic mode by RGB remote controller..
  • 【Save Electricity Cost and Sales Picking Up】10 ft of each string ,total 100 ft (10 lots of 100 ft), provides extreme energy saving solution and brightness for your business. with upgraded DC12V input low voltage and IP67 waterproof so that module led lights can work normally when it rains or snows..
  • 【Can be Cut Off】 High energy efficient 5050 SMD module 30 watt and 200 Lumen for each . 20 Pcs led module each string ,3 Leds each module, so that module lights can be cut off to DIY your own LOGO or Lighted Store Signage..
  • 【Easy to Use】 Easy installation With Super Sticky Self-Adhesive tape on the back of each module, and optional screw holes, you can stick or hang on anywhere you like. Please search (ASIN) B082RM4XXJ of power supply and (ASIN) B082M8K68V of Remote Controller, if you need them from us ..
  • 【Extensive Applications】Can be used in LED Channel Letter Lighting, Boat Cabin & Deck Lighting,Garage,Car, Motorcycles, Cabinets, Showcase, Step lights, Makeup mirro....
Check Stock

LCD Module 2004A 5v IIC I2C LCD Display Module, Blue Screen White Character Serial Peripheral Interface

  • The module is a low-power consumption character LCD Module with a built-in controller..
  • The module can be easily interfaced with a MCU..
  • Display Format: 20 Characters x 4 lines..
  • It is fantastic for Arduino based project..
  • Fully assembled and tested Serial LCD 20x4 Module..
Check Stock

Isolation Amplifiers Isolated Modulator (5 pieces)

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock

Dingdong Store DIY Electronics Kits Ultrasonic Module Distance Measuring Transducer Sensor 0~5.5m Soldering Project Kit for Car Reversing Alarm, A561

  • The main controller of this module is STC89C51/52 micro controller.
  • The digital tube displays the measured distance, and the triode drives the digital tube.
  • HC-SR04 ultrasonic module measuring distance, measuring range 0.02m~5.5m.
  • This module can be used as a car's reversing radar, and the alarm distance can be set and changed with keys..
  • Please read the User Manual before installing. Our policy is to make our customers happy. If you are not 100% satisfied, just contact our customer service, we will refund your money. Since your product is shipped by Amazon, we are not sure what happened to our product at Amazon's warehouse. If any components are missing, please contact us for replacements..
Check Stock

LANTRO JS 1.14 Inch TFT Color LCD Display Module ST7789 8Pin IPS 135x240 TFT Display Screen Module

  • The module is a low-power consumption character LCD Module with a built-in controller..
  • The module can be easily interfaced with a MCU..
  • Display Format: 20 Characters x 4 lines..
  • Fully assembled and tested Serial LCD 20x4 Module..
Check Stock

TEKONSHA 90885 / Tekonsha Prodigy P2 Electronic Brake Control f/1-4 Axle Trailers - Proportional

  • Ram 1500 2500 3500 4500 5500 Electronic Integrated Trailer Brake Controller Module with Switch. Part# 82215040AC, 82215040AB, 82215040, 68105206AC, 68105206AB.
  • Replacement for 2016-2021 Dodge Ram 1500.
  • Warranty for 12 Months! Adopt high-end chips to provide fast braking with positive response, and the performance is at least 50% higher than other similar parts..
  • Integrated Trailer Brake Control Module allows driver to automatically or manually activate the electronic brakes on properly equipped trailers for greater stopping power on downhill grades. The controller and status display are mounted in the dashboard to the left of the steering wheel, and the included control lever can activate the trailer brakes independent of the truck's brakes. Drivers can customize the amount of brake force the trailer uses, depending on load requirements..
  • It is necessary to check if the vehicle has both trailer brake module connectors. These connectors are located under left side of the steering column. Both connecters are 4 pin connectors. If both connecters are not present the ITBM kit cannot be added to the vehicle..
Check Stock

Nordic BLE 4.0 nRF51822 Controller Chip Bluetooth Module Small Size 18.5 x 9.1x 2.0mm 5 Pack

  • YTX51822-S01 is a high performance ,low power radio transmit and receive system module based on Nordic BLE 4.0 nRF51822 controller chips..
  • It has the smallest volume package in the industry, the size is 18.5 X 9.1X 2.0, suitable for most applications which pay more attention to the size..
  • The module integrate the complete standard low energy Bluetooth 4.0 protocol stack S110 drive..
  • Customer's MCU is connected to the module by UART port, it will automatically send a broadcast code after the module starts..
Check Stock

ElecGear 4X Replacement Joystick (EL2 FU 10K) for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation

  • [EL2 FU 10K for PS4/PS3 Controller] – 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange.
  • [Compatibility] – The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like ‘Scuf’ and ‘Razer Raiju Ultimate’ with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition.
  • [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting.
  • [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no react....
Check Stock

SainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO

  • This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
  • Software: GRBL controller, UniversalGcodeSender..
  • Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
  • Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Check Stock

5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module

  • HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
  • Default baud rate:9600, Button: Press the button.
  • the module enter the AT mode. AT commands are executed only in AT mode..
  • HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Note: The module doesn’t suitable for IOS system..
Check Stock