Categories

Best Molded Carrying Case

Buckle Trim Screwdriver Chrome Vanadium Alloy Steel Removal Pliers Short Crowbar Repair Tool

  • [VERSATILE SET] Complete set contains T8, T10, T15, T20, T25, T27, T30and T40 Torx tip sizes.
  • [ALLOY STEEL] Blades and tips made from a high-performance alloy steel offer maximum strength and durability.
  • [ERGONOMIC HANDLES] Molded handle made from green plastic provides a comfortable and secure grip while working.
  • [CARRYING CASE] Polyethylene (PE) plastic carrying and storage case has the durable strength professionals.
  • [PROFESSIONAL FINISH] Screwdrivers are built with professional quality to tackle any challenge.
Check Stock

Primos Neoprene Bow Sling

  • Fits all bows 28 to 38-inch axle-to-axle and all parallel limb bows, optimized for normal and large size cams.
  • Soft and durable neoprene protects your bow's strings, cables and cams while in the field.
  • Comfortable EVA molded shoulder sling with no-slip rubber grip for hands-free carrying.
  • Quickly and quietly slips on or off bow cams.
  • Security straps and quick-snap buckles guarantee your bow stays secured and qualifies as a lock in some states with case requirements.
Check Stock

Motormite 21151 Drum Brake Bar

  • 13pcs Kits Rotates Piston Back Into Caliper Replacement forting Of New Brake Shoes And Pads.
  • This Tool Kit Allows You to Rewind the Pistons In Brake Calipers By Hand, Without Damaging the Gaskets in the Pistons and Seals.
  • Precisely Made Adaptor Plates with Thrust Bolt Assembly and Reaction Plate.
  • Includes Left And Right Handed Thrust Bolt And 12 pcs Adapters Replacement for Using In Most Domestic And Imported 2/4WD Vehicle.
  • Come With Blow Molded Carrying Case Replacement for Convenient Storage And Carrying.
Check Stock

ABN Chain Breaker 13-Piece Set with Carrying Case – Chain Cutter and Riveter for Motorcycle, Bike, ATV

  • Practical: Use the ABN Chain Breaker 13-Piece Set with Carrying Case – Chain Cutter and Riveter for Motorcycle, Bike, ATV to remove and reinstall motorcycle/bike, rear drive, and OHV cam chains that are #35 to #630.
  • Tool completely pushes out the chain link pin.
  • Easy to Use: Instructions – Loosen the sprocket nut, unscrew the bottom bolt on the chain press tool, and place the spring on the pin inside the tool. Then, replace the tightening bolt and remove the top bolt. Screw on the handle and lever, place the tool over your chain, and tighten the tool on the chain pin (this forces the chain and pin out the other side).
  • Durable: Constructed from hardened steel to ensure strength and longevity.
  • Easy Storage: 4.8” x 3” x 8.5” (12.2cm x 7.6cm x 21.6cm) heavy-duty blow-molded plastic carrying case for easy transportation, simple storage, and quick organization.
  • Contents: Package includes (1) chain press + (1) handle + (1) lever + (3) anvils, (3) pins – 2.2mm, 2.9mm, 3.8mm + (1) riveter + (1) spring + (2) press plates + (1) carrying case.
Check Stock

HuntRite Light Duty Gun Case, Black

  • HARD CASE: Our hard rifle case is made from durable blow molded plastic. It’s super tough and provides reliable, hard-wearing rifle protection.
  • FOAM INSERT: Featuring a foam insert within the hard shell case to provide shock absorption, cushioning and damage prevention for your long rifle or bow.
  • PROTECTION: Protect your rifle from dents, scratches, dust and water. Our shotgun case keeps your gun safe and secure.
  • LIGHTWEIGHT: Our plastic carrying case weighs just 7 lbs. The lightweight design is portable and easy to transport whether you’re hunting or on the road.
  • DIMENSIONS: Our HuntRite gun cases for rifles have interior dimensions of 47"l. x 8"w. x 4"d. (each side is 2"d.).
Check Stock

Plano Pro-Max Series Single Scoped Rifle Case with PillarLock, Black, Hard Shell Rifle Case, Crush-Proof Protection for Firearms and Firearm Accessories

  • PLANO PRO-MAX SERIES GUN CASE: Protect your firearms from damage with the Plano Pro-Max Series Contoured Rifle Case with Pillars – a hard-shell single gun case. The Pro-Max Contoured Rifle Case holds a scoped rifle with a large objective lens..
  • THICK-WALLED CONSTRUCTION with heavy-duty latches and a patented PillarLock system for crush-resistant strength keeps firearms safe..
  • HIGH-END SECURITY: Molded latches and padlock tabs offer added security. Pro-Max cases include a number of high-end security features to keep firearms safe and damage-free..
  • COMFORTABLE GRIP: Carrying shouldn’t be a burden. The molded-in carry handle is designed to reduce fatigue in transit..
  • PRODUCT SPECIFICATIONS: Made in the USA. Black case with the capacity for a single, scoped firearm. Not airline approved..
Check Stock

Garmin Carrying Case 5.5 inches

  • Travel in style with this sleek carrying case. It’s built to endure the elements, protecting your compatible navigator for the long haul. This case is designed with a durable thermo-molded exterior with a zipper-accessed padded interior..
  • Compatible with Tread, Tread Base Edition, and zumo XT.
Check Stock

Celestron - Telescope Carrying Case for NexStar Optical Tubes - Fits 4\

  • THE ULTIMATE PROTECTION: The absolute best way to transport and store your Celestron telescope. Case is compatible with- NexStar SE 4 inch (mount and OTA), NexStar SE 5 inch (mount and OTA), NexStar SE 6 inch (mount and OTA), NexStar Evolution 6 inch (mount and OTA), 8 inch SCT EdgeHD (OTA only).
  • EVA MOLDED WITH THICK FOAM: Protect your telescope with a hard yet flexible shell and foam padding along all walls and above the accessory pouch..
  • STURDY CARRYING STRAPS: Durable nylon carrying straps make transportation easy..
  • CUSTOMIZABLE FIT: Two dense foam spacers and a built-in compression strap allow you to customize the case for each telescope model..
  • BONUS ACCESSORY POCKET: A convenient storage zipper pocket that holds all your telescope's standard accessories with room to expand..
Check Stock

13 pcs Motorcycle Chain Breaker Set,Chain Removal Tool Chain Cutter and Riveter Kit for Cam and 25 to 630 Chains

  • Practical: Use the Chain Breaker 13-Piece Set with Carrying Case – Chain Cutter and Riveter for Motorcycle, Bike, ATV to remove and reinstall motorcycle/bike, rear drive, and OHV cam chains that are #35 to #630.
  • Tool completely pushes out the chain link pin.
  • Easy to Use: Instructions – Loosen the sprocket nut, unscrew the bottom bolt on the chain press tool, and place the spring on the pin inside the tool. Then, replace the tightening bolt and remove the top bolt. Screw on the handle and lever, place the tool over your chain, and tighten the tool on the chain pin (this forces the chain and pin out the other side).
  • Durable: Constructed from hardened steel to ensure strength and longevity.
  • Easy Storage: 4.8” x 3” x 8.5” (12.2cm x 7.6cm x 21.6cm) heavy-duty blow-molded plastic carrying case for easy transportation, simple storage, and quick organization.
  • Contents: Package includes (1) chain press + (1) handle + (1) lever + (3) anvils, (3) pins – 2.2mm, 2.9mm, 3.8mm + (1) riveter + (1) spring + (2) press plates + (1) carrying case.
Check Stock

RLSOCO Carrying Case Replacement for Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Toner and Probe Kit.

  • ►Great Compatibility-- This carrying case holds Fluke Networks MT-8200-60-KIT perfectly and also keeps other compatible tools when removing the soft foam..
  • ►Top Materials -- Instead of using the cheap materials, our case using the high quality and eco-friendly materials to prevent your tools from the horrible smell. The outside covers is the nice 1680D fabric and the lining using the high-density EVA,which make it sturdy and durable..
  • ►Excellent Protection -- It is specially designed with the molded compartments that keep Fluke network kit orderly and neatly, along with a soft pad to cover the device, which protects your tools from scratches, shock, dust and wet!.
  • ►Considerate design- Upon the bottom case, there is a large pocket enlarging the spaces for probes and some essential tools with you. It’s a well-thought-out portable case for both carrying out and home storage..
  • ►Quality Assurance★-- Compared to the market products, our case is made of green materials.All our products are using qualified Materials,which Rohs certificated! Hard shell with two-year assurance..
Check Stock

ABN Universal Drum Brake Puller 8-Piece Set with Carrying Case – Master Removal Tool Kit for Automotive Drum Brakes

  • Practical: Use the ABN Universal Drum Brake Puller 8-Piece Set with Carrying Case – Master Removal Tool Kit for Automotive Drum Brakes to service....
  • Durable: Constructed from heat-treated metal that is plated with chrome for strength and longevity.
  • Comfortable Grip: Molded and textured tool handles are a larger size for a secure grip and less user fatigue.
  • Easy Storage: Heavy-duty 14.8” x 2.3” x 10.5” (37.6cm x 5.8cm x 26.7cm) blow-molded plastic carry case for easy transportation, simple storage,....
  • Contents: Package includes (1) spring compressor + (1) brake spring installer + (1) spring removal tool + (1) brake retaining spring tool + (1) brake....
Check Stock

1/2' Torsional Torque with 3 Free Socket Lug Wrenches, Automotive Tire Wheel Tools Multiplier Wrench Lug Nut Remover Type Car Tire Disassembly Labor-Saving Torque 3200N.M Suitable for most vehicles

  • ...1:16 gear ratio bringing 800 NM, this lug nut wrench produces powerful output torque, which helps easily loosen and remove large rusty nus or bolts to save both time and labor..
  • 3 Free Socket and Portable Storage Case---Torque wrench multiplier set includes 3 sockets: 17mm, 19mm, 21mm. Heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organization..
  • Safety output range---The maximum safety output torque ≥ 3200N.M. Torque Output: 800 Nm, Trans-Speed Ratio: 1:16 1/2", Square Drive 3 sockets in each set: 17mm, 19mm, 21mm.Heavy-duty blow-molded plastic carrying case for quick transportation, simple storage, and organization..
  • Scope of application--- Labor Saving Wrench can be used to disassemble various kinds of tires the easy way. Suitable for most vehicles, such as cars, trucks, buses, RVs, semi-trucks and other heavy duty vehicles etc..
Check Stock

Muzzy Broadheads and Accessory Case Grey/Blue 601

  • VITAL PROTECTION - The Muzzy Broadhead and Accessory Case is a handy carrying case made specifically to hold your Muzzy broadheads and accessories.....
  • PREMIUIM QUALITY - The zippered EVA molded case with attractive embossed logo is designed to hold up to five Muzzy broadheads. Keeping your Muzzy....
  • COMPACT DESIGN - The foam insert on the inside of the Muzzy Case holds broadheads in place and is blade friendly. Measuring 6” W x 4” H x 1.5”....
  • STAY PREPARED- Just because you got your game doesn't mean you have to throw your broadhead away. Muzzy has a full selection of fixed-blade....
  • BRAND TRUST: Founded in 1984, Muzzy is the #1 selling brand for fixed-blade broadheads due to their sharpness, ease-of-use, and innovative designs.....
Check Stock