Categories

Best Molex Crimp Tools

Micro Connector Pin Crimping Tool, Yangoutool Micro Ratcheting Crimper 32-20AWG for D-Sub,Open Barrel suits Molex,JST,JAE

  • Suitable for micro connector pins,capacity range 0.03-0.52mm /32-20AWG.
  • Only one time crimp needed : Double-layer jaws crimps conductor and insulation sheath simultaneously.
  • Wire Electrical discharge machining(EDM) Cutting jaw can make sure the surface of the jaws are smooth to avoid the terminals be stucked and offer excellent crimps.
  • Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR.
  • Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc..
Check Stock

IWISS IWC-1424AB Wire Crimping Tool for Weather Pack Terminals, Metri Pack Connectors, Open Barrel Terminals, Stamped Contacts with Built-in Wire Stripper and Wire Cutter

  • IWC-1424AB is a combination of IWS-1424A Open Barrel Crimper and IWS-1424B Weather Pack Crimper. It’s also upgraded with built-in wire stripper and wire cutter AWG20-10..
  • Weather Pack Crimper: Suits for Weather-Pack, Metri-Pack 150 Sealed, Metri-Pack 150 Unsealed, Metri-Pack 280 Sealed, Metri-Pack 280 Unsealed. IWC-1424AB crimper is designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Crimper: IWC-1424AB also served as open barrel crimp tool crimps AWG 14-24 non-insulated, open barrel terminals, also known as OEM terminals from Molex, TE, Delphi, Deutsch. It’s also capable of crimping Deutsch stamped pins and sockets, Size 16, AWG14 to AWG 18..
  • Two Step Crimping: Crimps conductor and insulation portion of contacts in separate cavities. Tool must be closed twice to complete termination. IWC-1424AB is a 7 cavity wire crimper for a variety of crimping range..
  • Applications: IWC-1424AB allows the automotive DIYer to install weather-tight connectors with tools that were previously only available to the professionals. Replace damaged factory-installed connectors or add accessories while maintaining full factory wire harness integrity. A must have tool for making OEM wires and harness..
Check Stock

HKS Ratcheting Crimping Tool Set 11 PCS - Changeable Jaw for Dupont JST MOLEX Open Barrel Terminals Insulated and Non-Insulated Ferrules Butt MC4 and Coax Connectors - AWG 24-5

  • Versatility: 9 jaws suit for open barrel terminals (for Dupont, JST, TE, MOLEX etc.), D-sub conenctors,KF 2510 connectors, ATX,EPS,PCIE,SATA Pins....
  • Excellent Performance:The secondary polished jaws and ratchet mechanism ensure a high quality crimp after repeated crimping. One of the jaws, A58, is....
  • Ease Of Use:Designed with an automatic release mechanism to maintain a high quality and efficient crimping process under repeated crimping..
  • Convenience:Comes with a tie-in toolkit for easy replacement of dies. All tools and accessories are packed in a durable tool bag, which is easy to....
  • Ergonomic:Due to the optimal handle grip position and TPR material comfortable non-slip grip, yes the work process is very labor-saving..
Check Stock

Engineers Precision Crimping Pliers PA-09 Best Made Precision Crimping Tool for AWG32-AWG20 Wires across 80 Different Pins & D-Sub Connectors Contacts, Oil-Resistant Grip (PA-09 + Free Tool Pouch)

  • Perfectly crimps pins such as JST XH, NH, VH series, MOLEX Mini-Fit Jr. KK series, etc..
  • Crimp AWG26-18 wires across over 100 different pins (& D-SUB connector contacts) from the main crimp pin manufacturers.
  • Capable of crimping open barrel pins with longer style lugs in height (yields an excellent 'pin curling' result).
  • 4 different crimping die widths - 1.6mm, 1.9mm, 2.2mm & 2.5mm.
  • Spring loaded handles for easy operation (handles latch shut for storage).
Check Stock

Engineer PA-21 Universal Crimping Pliers / Crimper, Made in Japan, Precise Crimping of Open-barrel contacts, with Spring Loaded

  • Purpose: IWS-2820M open barrel crimper tool is designed to crimp non-insulated open barrel, OEM-style terminals. Perfect for servo lead connectors and some other RC crimp connectors..
  • Capability: 0.08-0.5m㎡, AWG 28-20. IWS-2820 does many mini micro sizes like U-barrel or stamped style terminals. Perfect crimps pins such as JST VH, XH, NH pins,Molex KK,Picoblade series, etc..
  • Ultra-precision: Presicion Crimping Plier with double-hinge mechanism that keeps the jaws parallel for a straight crimping engagement and ensures excellent and accurate crimps..
  • Ergonomic Design: Black oxide steel with rust resistant protect. TPR+PP grips, light and compact, provide comfortable using experience and reduce fatigue when crimps. Spring loaded handles for easy operation and storage..
  • Applications: Used to connect electrical wires on rechargeable battery packs, battery balancers, battery eliminator circuits, 3D printers, and radio controlled servos..
Check Stock

Engineers Precision Crimping Pliers PA-09 Best Made Precision Crimping Tool for AWG32-AWG20 Wires across 80 Different Pins & D-Sub Connectors Contacts, Oil-Resistant Grip (PA-09)

  • Perfectly crimps pins such as JST ZH, PH, XH, SH/SHL series, MOLEX KK, Picoblade series, etc..
  • crimps AWG32~AWG20 wires across 80 different pins (& D-SUB connector contacts) from the main crimp pin manufacturers.
  • professional results (& at a fraction of the price as charged by the Pin Vendors for their specific crimping tools).
  • capable of crimping 1.25 to 2.5mm pitch connector pins (narrow-pitch).
  • 4 crimping die widths - 1.0mm, 1.4mm, 1.6mm & 1.9mm.spring loaded handles for easy operation (handles latch shut for storage).oil-resistant TPR (thermoplastic rubber) grips for unmatched comfort (strap holes at end of handles).light & compact body for fatigue-free work.original joint-screw by "ENGINEER" allows for quick & easy maintenance.made in Japan (ROHS Compliant), constructed from S55C Carbon Steel.
Check Stock

IWISS Mini Micro Open Barrel Crimping Tools Works on AWG28-20 JAM, Molex, Tyco, JST Terminals and Connectors used for FPV, Drone Servo

  • Purpose: IWS-2820M open barrel crimper tool is designed to crimp non-insulated open barrel, OEM-style terminals. Perfect for servo lead connectors and some other RC crimp connectors..
  • Capability: 0.08-0.5m, AWG 28-20. IWS-2820 does many mini micro sizes like U-barrel or stamped style terminals. Perfect crimps pins such as JST VH, XH, NH pins,Molex KK,Picoblade series, etc..
  • Ultra-precision: Presicion Crimping Plier with double-hinge mechanism that keeps the jaws parallel for a straight crimping engagement and ensures excellent and accurate crimps..
  • Ergonomic Design: Black oxide steel with rust resistant protect. TPR+PP grips, light and compact, provide comfortable using experience and reduce fatigue when crimps. Spring loaded handles for easy operation and storage..
  • Applications: Used to connect electrical wires on rechargeable batterypacks,battery balancers,battery eliminator circuits,3D printers, andradio controlled servos..
Check Stock

RJ45 Professional Heavy Duty Crimp Tool Ethernet Connector Crimper Cutter HD Crimping Wire Cable Stripper Stripping Blades for EZ End Pass Through RJ-45 RJ12 RJ11 Legacy Connectors

  • 30 DAYS MONEY BACK GUARANTEE ensures your satisfaction. If not happy with the durability and the performance of crimping tool, return it for full refund of your purchase price. This reliable, effective, efficient all-in-one HD quality crimp tool cuts, strips, and crimps fast, reliable CCTV Security Media Data Communication modular-crimp connector installation..
  • RJ45 crimping tool is Fast, reliable modular-crimp connection for data and voice-over applications. Create clean, flush trim on EZ pass through and legacy connectors RJ11 RJ12 and RJ45 extended conductors. precision ground crimping dies with zero flex frame, prevents torque loss during the crimping cycle, tool die head assembly provides 360 degrees of connector support during crimp. Ratcheting action ensures a perfect crimp every time. High quality professional crimping pliers tool..
  • For EZ pass through and legacy connectors RJ11 RJ12, RJ45 CAT5e, shielded CAT5e, CAT6 modular plugs connectors, as well as, all standard modular plugs except amp. This pass through and legacy connectors crimper's surface to surface contact drivers delivers full and uniform crimp force. Built-in cutter and stripper for flat and round cable also guide for proper wire sequence, and high quality professional crimping pl....
Check Stock

Dupont Crimping Tool,knoweasy SN 48B Terminal Crimper and Dupont Crimper for AWG 26-16/0.14-1.5mm²

  • ✅【Product Feature:】Precise crimping die sets and integral lock with self releasing..
  • ✅【Ratcheting Design:】Designed according to human factors engineering,it can save 50% energy when crimping..
  • ✅【Quality Material:】The components of the ratchet crimping tool are made of special steel..
  • ✅【Application:】Used for DuPont & jst-sm Molex connectors and pins..
  • ✅【After Sales Warranty:】Your customer satisfaction and 12 months warranty of crimp tool can be guaranteed..
Check Stock

SharkBite PEX Crimp Ring Removal Tool, 1/2, 3/4 and 1 Inch Copper Crimp Rings, Orange Handles, Plumbing Fittings, 23055

  • SHARKBITE CRIMP RING REMOVAL TOOL: This SharkBite plumbing tool removes copper crimp rings from brass or poly crimp connections for fittings to be reused.
  • has 200 lbs of crimping force and features a 6 inch handle.
  • COMPATIBILITY: This plumbing disconnect tool works with 1/2 inch, 3/4 inch, and 1 inch copper crimp rings.
  • EASY TO USE: This intuitive SharkBite crimp ring removal tool allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

SharkBite 1-1/4 to 2 Inch PEX Crimp Tool, 24675

  • Capability: IWS-FA PEX Crimp Tool Kit works with 4 sizes of PEX tubing - 3/8-in., 1/2-in., 3/4-in., 1-in. (The tool itself) and includes a Decrimping Tool (for crimp ring removal) -all in a compact and durable carrying case. Compatible with all types of PEX copper crimp rings and crimp style PEX fittings.
  • Compatibility:Copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands).Brass or Poly(PPSU) crimp style PEX fittings (F1807/F877 or F2159 standards respectively).All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, Zurn, etc..
  • Users Manual Included: Contains information on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Crimp Ring Removal Tool: Allows PEX fittings to be used more than once. It is designed to remove copper crimp rings with gentle action that will not damage fittings. The easy dial setting adjusts for crimp ring sizes. Compatible with brass and PPSU fittings.
  • Calibration & Inspection: Tool calibrations are made easy with adjustable lock screws. The Crimp/Clamp Tools must be checked ....
Check Stock

Open Terminal Connector Crimping Tool Kit,2.8mm 3.5mm 3.9mm 4.8mm 6.3mm 24-14 AWG Crimper SOMELINE for Use on Molex 2.13mm 2.36mm AMP - TE CONNECTIVITY Connectors,Male Female Spade and Ring Terminal

  • ... non-insulated open barrel, OEM-style terminals and wire splices It provides the perfect crimping service for the connector you buy..
  • ✅【 Crimping Pliers Capacity】Crimping tool has a wide range of crimping capacity. It’s capable of crimping 2.8mm, 3.5mm, 3.9mm, 4.8mm and 6.3mm pitch open barrel terminals from Molex Standard .093"/MX150/MLX Crimp Terminal , AMP - TE CONNECTIVITY Mate-n-Lok/FASTON Connector etc..
  • ✅ 【Type and Size】The terminal block is made of copper, which has high conductivity, oxidation resistance and durability, enough to meet the needs of most DIY projects. 240 wire crimp terminals (TAB 2.8mm, 4.8mm, 6.3mm spade connectors and insulating sleeves) for 24-14 AWG cable. A portable storage box is provided for easy storage and sorting of cable terminations..
  • ✅【Ring Terminal】Brass ring terminals, commonly used for cycling battery connections and ground connections, connecting aftermarket switches, ignition coils, ground wires, and similar items that require screws or bolts..
  • ✅【Widely Application】The combination of crimping tool and spade bullet connectors can be widely used to home appliances, auto, audio system for battery or rocker switch quick connecting / disconnecting, motorcycle, scooter, auto, car, truck, boat....
Check Stock

Zhushan Spark Plug Wire Crimping Tool Kit, Ratchet Spark Plug Crimper Diameter 8.5mm for Crimping and Stripping Plug, 24PCS 180 °/90 °/Straight Spark Plug Coil Terminals and 24PCS Terminals Boots

  • 【Spark Plug Crimp Tools】Spark Plug Crimp Tools are made of high quality steel, hardened and durable.
  • crimp spark plug wire terminals and strip 8.5mm spark plug wires, spark plug wire crimp tools are suitable for most types of connections.
  • 【Crimp Tool Kit Includes】1 x spark plug crimping tool ,180, 90 and 180 degree spark plug coil terminals with boots,8 of each type.
  • 【Adjustable Crimping Force】The tool is equipped with a star wheel, built-in thickened ratchet automatically adjusts to the appropriate to ensure proper crimping force. The quick release lever allows the crimping jaws to be opened at any position.
  • 【Spark Plug Coil Terminals】Spark plug coil terminals for 8mm wire. They are made of high-quality brass for good electrical conductivity, and the black rubber boots protect the terminals from dust and moisture.
  • 【Appication】Professional insulated wire terminal ratchet crimping tool can be used for home appliance repair, home circuit repair, car circuit connection, and everything about circuit connection.
Check Stock