Categories

Best Mono Models

AEcreative Programming Cable for RadioShack GRE Whistler Scanner MFJ 20-546

  • This cable does not for firmware update use, aftermarket replacement cable of RadioShack part 20-546..
  • For these models need use with the stereo/mono adapter. RadioShack: PRO-79 PRO-82 PRO-83 PRO-84 PRO-89 PRO-93 PRO-94 PRO-95 PRO-96 PRO-97 PRO-99 PRO-160 PRO-162 PRO-2051 PRO-2053 PRO-2067 PRO-2096 PRO-433 PRO-528.
  • work with model: RadioShack models: PRO-106 PRO-135 PRO-136 PRO-137 PRO-163 PRO-164 PRO-197 PRO-404 PRO-405 PRO-426 PRO-427 PRO-428 PRO-444 PRO-496 PRO-501 PRO-515 PRO-522 PRO-523 PRO-524 PRO-525 PRO-526 PRO-527 PRO-533 PRO-649 PRO-650 PRO-651 PRO-652 PRO-2017 PRO-2018 PRO-2054 PRO-2055 etc. GRE: PSR-100 PSR-200 PSR-300 PSR-300C PSR-310 PSR-340 PSR-400 PSR-400C PSR-410 PSR-500 PSR-600, also work with Whistler scanner model require part 20-546..
  • package included: 1x USB cable, 1x 3.5mm stereo/mono adapter..
Check Stock

Brother Genuine-Drum DR630, Page Yields approximately 12,000 pages , Black ( Does not include a Toner)

  • Packaging may vary((As the packaging shows more models than the image on the detail page reflects)..
  • BROTHER GENUINE DRUM UNIT: The Brother DR-630 Drum Unit is intelligently engineered as part of a complete mono laser printing system..
  • FOR USE WITH BROTHER MONO LASER PRINTERS AND ALL-IN-ONES: DCP-L2520DW, DCP-L2540DW, HL-L2300D, HL-L2305W, HL-L2315DW, HL-L2320D, HL-L2340DW, HL-L2360DW, HL-L2380DW, MFC-L2680W, MFC-L2685DW, MFC-L2700DW, MFC-L2705DW, MFC-L2707DW, MFC-L2720DW, MFC-L2740DW..
  • YIELDS UP TO 12,000 PAGES: This mono laser drum unit yields approximately 12,000 pages(1), producing sharp, and brilliant prints..
  • CRISP RESOLUTION: The Brother DR-630 Drum Unit delivers crisp, sharp printing with quality you can consistently rely on..
Check Stock

Brother DR-630 DCP-L2520 L2540 HL-L2300 MFC-L2680 L2685 L2700 Drum Unit in Retail Packaging / 3-Toner Cartridges

  • Packaging may vary((As the packaging shows more models than the image on the detail page reflects)..
  • BROTHER GENUINE DRUM UNIT: The Brother DR-630 Drum Unit is intelligently engineered as part of a complete mono laser printing system..
  • FOR USE WITH BROTHER MONO LASER PRINTERS AND ALL-IN-ONES: DCP-L2520DW, DCP-L2540DW, HL-L2300D, HL-L2305W, HL-L2315DW, HL-L2320D, HL-L2340DW, HL-L2360DW, HL-L2380DW, MFC-L2680W, MFC-L2685DW, MFC-L2700DW, MFC-L2705DW, MFC-L2707DW, MFC-L2720DW, MFC-L2740DW..
  • YIELDS UP TO 12,000 PAGES: This mono laser drum unit yields approximately 12,000 pages(1), producing sharp, and brilliant prints. CRISP RESOLUTION: The Brother DR-630 Drum Unit delivers crisp, sharp printing with quality you can consistently rely on..
  • PROTECT YOUR INVESTMENT: By using Brother Genuine Supplies, you’ll ensure a seamless fit and optimal integration with your Brother printer and cartridges..
Check Stock

ANYCUBIC Resin 3D Printer Photon Mono X Large LCD UV Photocuring Fast Printing with 8.9 4K Monochrome Screen Matrix UV LED Light Source and WIFI Control 192 L x120 W x245 H mm / 7.55 x4.72 x9.84

  • 3X Faster Resin 3D Printer: ANYCUBIC Photon Mono X 3D printer comes with an 8.9inch 4K Monochrome LCD with an HD resolution of 3840 x 2400, reducing....
  • Larger Printing Volume: ANYCUBIC Photon Mono X has a large printing volume of 192mmx120mmx245mm / 7.55"x4.72"x9.84", you can print multiple models of....
  • Higher Accuracy and Stronger Stability: ANYCUBIC Photon Mono X adopts new upgrade matrix parallel UV light source, which is more uniform, and can be....
  • APP Remote Control and UV Cooling System: You can monitor the whole UV Photocuring printing progress in real time and adjust the printing settings....
  • More Function: A. Support Chitu box slicer, B. New UI menu, intuitive and responsive, C. Safe Power Supply, with UL certification. All of our 3d....
Check Stock

ANYCUBIC Photon Mono SE Resin 3D Printer, UV LCD SLA 3D Printer Ultra Fast Printing with 6' 2K Mono Screen and WiFi Function & Dual Z-axis Linear Rail, Print Size 5.12'(L) x 3.07'(W) x 6.29'(H)

  • High Precision and Strong Stability, This LCD 3d printer adopts new upgraded matrix parallel light source, able to spread the UV light more evenly across the LCD, working together with dual Z-axis guide rail structure, the printing details and precision are greatly improved and the quality of printed models will blow your mind, it's a great sla 3d printer for printing cartoon characters and miniatures, etc.
  • Sturdy Build Quality: Metal frame and CNC machined aluminum body makes Photon Mono Se a very formidable machine, with sanded aluminum platform, greatly enhance the adhesion between platform and prints and enables consistent printing success, and double built-in active carbon maximally absorb the fume of resin and offer you a refreshing printing experience.
  • WIFI Control and Easy Leveling: Photon Mono SE adopts Anycubic 3d app through wifi, which can remote control your print operations, monitor printing progress and adjust print settings at any time. Our resin 3d printer comes with 90% pre-assembled, and leveling can be done in few simple steps.
  • 1, loosen the platform, 2, Click "Tools" - "Move Z" - "Home" icon and auto adjusts, 3, Tighten the screw on the right side of the platform.Then ready for your printing.
Check Stock

SOUNDSTREAM AR1.8000D ARACHNID Series 8000w Mono Amplifier 1-Ohm Class D

  • SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt 1-Ohm Mono Amplifier.
  • SOUNDSTREAM AR1.8000D ARACHNID Series 8000 Watt Mono Amplifier 1-Ohm Class D Amp . 1-ohm Stable Monoblock Operation for MAX Power. Bridge 2 Monoblocks Together for Double Power!. Military Grade PCB w/ PWM MOSFET Power Supply. Direct Short, Thermal, & Overload Circuit Protection. High/Speaker Level & Low Level/RCA Input. 200mV-6V Low Level RCA Input. Pre-Amp Low-Level RCA Outputs (Select Models)..
  • 4g Power Wire & 8g Speaker Wire Outputs. Variable 12dB High & Low Pass Crossovers. 12dB Bass Boost Increases Low Octave Harmonics. 1800 Phase Shift Improves Low Octave Dynamics. Dash Mount Remote Control Included. Specifications:. Max Power (Watts): 8,000. RMS Power @ 4Ω: 1,500 x 1. RMS Power @ 2Ω: 2,500 x 1. RMS Power @ 1Ω: 4,000 x 1. Remote Gain Control: Included. Low Pass Filter: 40-180Hz. Bass Boost: 0-13dB..
Check Stock

TJ BRUTAL CUSTOMS Weld-On Hardtail Kit | 50% Weld-on Big Twin Hardtail Kit Made from 1.125" OD X .120 Wall DOM Steel for Ultimate Strength and Durability - Fits Honda Shadow VT600 VLX 600

  • ✔️FITMENT - Our weld on Hardtail kit fits on the following models.
  • It fits Honda Shadow VT600 VLX 600 and the bikes related with these models (same bike). It will fit on all the models of Honda Shadow. Because it was specifically made for the Honda Shadow bikes..
  • ✔️RIGHT RIDE HEIGHT - Our weld on the hardtail kit allows you to set the perfect ride height. It will also allow you to set the height according to your need and comfort and allow you to get the bike as low as you want within the limits of swingarm movement..
  • ✔️INSTALLATION - Some welding, grinding and cutting is needed to set the size you want. Remove the rear wheel, cut each side tubing, measure it and need to leave 3” to support the bracket. You can leave the mono strut support till you have the hardtail pieces welded in. After welding you can remove the mono strut..
  • ✔️PACKAGE INCLUDE - Weld on hardtail kit includes.
  • 2 pre-bent pieces and 1 straight crossmember. These pieces sleeve inside the VT600 & VLX600 frame, no slugs are used as the hard tail pieces act as the slugs. Make sure to rosette or plug weld all junctions..
Check Stock

Yousu 3D Printer Resin UTH Nebula, Water Washable Resin Dual Color 3D Printer UV-Resin Rapid LCD UV-Curing Resin 405nm Photopolymer Resin for LCD 3D Printer 1000g, Orange Purple Color.

  • [Super Easy to Clean] Yousu UTH Nebula Resin is a 3d printing resin water washable 405nm photopolymer resin enables you free from IPA/Alcohol cleaning process. Easy and convenient to do creations at home for hobby makers..
  • [Technoly Improved 3D Resin]UTH NEBURA series resins use unique technology to make two colors do not mix,different angle you will see different color.
  • [Low shrinkage and High precision] -YOUSU iForm 183 resin is special designed for LCD/DLP 3d printer with low shrinkage and high precision character. No matter for RGB screen or Mono screen like Mono X, Mono 4k,E Mars 3,Mercury Plus ,Phrozen Sonic ,other RGB printers etc..
  • [Excellent Fluidity & Great Stability]-Can quickly infiltrate models and shorten the curing time. Meanwhile UTH NEBURA 3d printing liquid has good combination of toughness, it 'a a kind of 3d resin which is easy to detach after forming..
  • [Better performance can be expected after post-treatment] - Cleaning under water with brush and dry with hairdryer, then recure with UV curing light, then stronger performance can be expected forming.If sprayed with transparent resin, the effect is more obvious.
Check Stock

YOUSU Water-Washable LCD 3D Printer Resin UV-Curing 405nm 3D Resin Suitable for Mono Screen and RGB Screen High Resolution 3D Printing Liquid Gray Color 1000g.

  • ... High precision] -YOUSU iForm 183 resin is special designed for LCD/DLP 3d printer with low shrinkage and high precision character. No matter for RGB screen or Mono screen like Mono X, Mono 4k,E Mars 3,Mercury Plus ,Phrozen Sonic ,other RGB printers etc..
  • [Excellent Fluidity & Great Stability]-Can quickly infiltrate models and shorten the curing time. Meanwhile iForm 183 3d printing liquid has good combination of toughness, it 'a a kind of 3d resin which is easy to detach after forming..
  • [Better performance can be expected after post-treatment] - Cleaning under water with brush and dry with hairdryer, then recure with UV curing light, then stronger performance can be expected forming..
  • [Safe Packaging]-Thickened aluminum bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.Also please mind your hands when open the resin becusae of the saftey loops is special design..
Check Stock

KICKER 48KMA8001 800 Watt 1-Ohm Marine/Boat Mono Amplifier Sub Amp KMA800.1

  • Specifications: POWER [watts/ch], 1 OHM MONO: 800 x 1, DYNAMIC POWER [watts]: 1200, COMES WITH WIRED REMOTE: Yes..
  • DIMS [in] all models 2-5/16H x 7-1/8W x_L: 8-1/16, DIMS [cm] all models 5.9H x 18.0W x_L: 20.5..
  • FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB, INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V..
  • SIGNAL-TO-NOISE RATIO: 95dB, a-weighted, re: rated power, ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, low pass only..
  • SUBSONIC FILTER: 24dB/octave, high pass fixed 25Hz, KickEQ BOOST: Variable 0-6dB, centered 40Hz..
Check Stock

Line 6 PowerCab 212 Plus

  • Choice of flat (frfr) or speaker Modelling modes.
  • Choice of 12 on-board speaker models (+ IR loading).
  • Plays your stereo presents in stereo not mono.
  • 500-Watt stereo amplifier (2 x 250 watts) delivers up to 131dB SPL.
  • Lightweight 12" Neodymium coaxial speakers with high-frequency compression drivers and robust 2" Voice coils.
Check Stock

Roland AIRA Rhythm Performer (TR-8S)

  • The TR-8S combines the best of its Roland heritage with modern production techniques and professional sound design.
  • Design kits with authentic TRS drums, sampled sounds, and effects.
  • The TR-8S has every sound from the most sought-after TRS drum machines, with detailed circuit-models of the 808, 606, 909, 707, 727, and even several modified versions.
  • Pull from the extensive collection of preset samples, or import your own mono or stereo sounds using the SD card slot.
  • Adjust decay and tuning and alter sample start points, speed, and direction.
Check Stock

maXpeedingrods Coilovers Adjustable Height for VW Golf MK2/MK3/MK4 1983-2000 Vento Corrado Jetta Mk2 All Models 1984-1998, Spring Shock Absorber Suspension Kit Strut, Amortiguador Lowering Kits

  • 【Application】 For VW Golf MK2 all models 1983-1992.
  • For MK3 and MK4 Cabriolet Golf all models.
  • For VolksWagen Vento 1994 -1998 all models.
  • For VolksWagen Corrado all models from 1989-1995.
  • 【Spring Rate】 Front: 7 kg/mm (392 in/lbs) & Rear: 7 kg/mm (392 in/lbs). Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance. .
  • 【Adjustable Height】 Lowering Range: front 365-535mm, rear 545-665mm. It’s a replacement part that retains maximum height and comfort of the original..
  • 【Twin-tube Structure】 Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort..
  • 【Excellent Material】The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..
Check Stock