Categories

Best Monoblock Amplifier

Hifonics Monoblock Car Amplifier – Gemini Series Class D Amplifier 2000 Watt, Car Electronics Audio Subwoofer Bass Boost 1 Ohm Stable MOSFET Power Supply for Car Speakers Mono Sub Amp

  • Power – This Class D 2000 Watt Car Amplifier has a power rating distribution as followed 2000 X 1 @ 1 OHM, 1000 X 1 @ 2 OHMS, 500 X 4 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design. It also comes with a high grade aluminum sink and Ultra-Fi Mosfet power supply..
  • Features – The monoblock bass boost car amplifier has features like - Frequency Response: 10~500HZ, Bass Boost, High/Low Level Inputs, Subsonic Filter: 10 – 40HZ, Remote Bass Knob, Variable Low Pass Crossover: 40Hz-300Hz, Phase shift: 0-180 Degrees.
  • RCA Ports - The RCA Jacks in this bass boost monoblock car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease as you just have to bring one set into the first amp and then use the line out rca jack to feed the next amp.
  • 1 Ohm Stable - This Hifonics Gemini Series Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to operate effectively..
  • QUALITY - This Class D Monoblock Amplifier exhibits quali....
Check Stock

Hifonics Monoblock Car Amplifier – Gemini Series Class D Amplifier 2500 Watt, Car Electronics Audio Subwoofer Bass Boost 1 Ohm Stable MOSFET Power Supply for Car Speakers Mono Sub Amp

  • Features – The monoblock bass boost car amplifier has features like - Frequency Response: 10~500HZ, Bass Boost, High/Low Level Inputs, Subsonic Filter: 10 – 40HZ, Remote Bass Knob, Variable Low Pass Crossover: 40Hz-300Hz, Phase shift: 0-180 Degrees.
  • Power – This Class D 2500 Watt Car Amplifier has a power rating distribution as followed 2500 X 1 @ 1 OHM, 1250 X 1 @ 2 OHMS, 825 X 4 @ 4 OHMS. The monoblock amplifier for car speakers also provides a 2-way protection circuitry as a part of its design. It also comes with a high grade aluminum sink and Ultra-Fi Mosfet power supply..
  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono sub amp stand out amongst the others..
  • 1 Ohm Stable - This Hifonics Gemini Series Subwoofer Amplifier is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is designed to power subwoofers that have a constant demand of high power in order to ....
Check Stock

Lanzar Maxp84 8' 800w Car Audio Subwoofer Sub 800 Watt

  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets..
Check Stock

Massive Audio E4 - Car Audio 4,000 Watt Nano Edge Series, Monoblock Car Amplifier, Bass Boost, 1 Ohm Stable

  • ...H PERFORMANCE CAR AUDIO AMPLIFIER | The best competition amplifiers for cars in the market! This 12v car amplifier features: 2000 Watts x 1 RMS @ 1 Ohm / 4000 Watts MAX, Freq: 10Hz - 220Hz, 0~12dB, Built-In OEM Line Converter, High Power in Extremely Small Heat Sink, Bass Boost 0~12dB, and Ground Loop Isolator. Our monoblock amplifier for car provides real punch for your car stereos and car subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding and underpowered car subwoofer amplifier. Your car amplifier package and car subwoofer set aren't complete without our monoblock Massive amplifier. Our car audio subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. DC 5V - 15V Operating Voltage..
  • QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS FULL POWER | Hits its full power all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. It works great and provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry..
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER | Don't settle f....
Check Stock

Lanzar maxp124d Lanzar Maxp124d 12 Max Pro 1600w Car Audio Subwoofer Sub 1600 Watt

  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
  • GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels.
Check Stock

Lanzar Amplifier Car Audio Amplifier Monoblock 1 Channel 3,000 Watt 2 Ohm MOSFET RCA Input Bass Boost Amplifier for Car Speakers Crossover Network - HTG157

  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their....
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down....
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes....
  • GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing....
Check Stock

Hifonics ZG-3200.1D Zeus Gamma 3200 Watt Max Power Class D Monoblock Car Audio Amplifier

  • CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier.
  • PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms.
  • MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections.
  • EASILY TIE INTO YOUR SYSTEM: Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier power.
Check Stock

SOUND Q QUBED SoundQubed HDX3 Series 2000W RMS Subwoofer 12 Inch Dual 1 ohm

  • CHARGING UPGRADES REQUIRED: You will damage this amp operating it on a stock charging system. Powerful Monoblock Bass Amplifier: Puts out up to 2800W RMS @ 1 ohm with charging system upgrades (16V). Dial in the perfect tuning for your sub stage with the S1-2250.1’s subsonic and low-pass filtering. If you want to push SPL competition-level power, you can strap two S1-2250.1s..
  • Not for Everyday Stereo Systems: The S1-2250.1 is a Class D subwoofer amp for serious bassheads with serious charging systems at their disposal. This is an audio amplifier for cars with upgraded electrical systems. Know your charging specs before you buy this amp. You generally need 100 amp hours per 1000W. So, for a 2000W class D monoblock amplifier, you would need a 200 amp alternator..
  • Stays Cool as a Cucumber: Added heatsink and improved circuitry make for excellent cooling. This efficient class D monoblock amplifier design keeps more power flowing to your system instead of turning into heat, so you can play louder for longer..
  • Easy Install, even for Dummies: Set screw terminals connect easily to your power and speaker wire. Surface-mount feet make securely mounting the S1-2250.1 a cinch. To get everything you need for installation, check out the SoundQubed Zero Gauge amp kit....
Check Stock

Lanzar B52 Car Audio Amplifier Monoblock 1 Channel 2,000 Watt 2 Ohm RCA Input Bass Boost Mobile Audio Amplifier for Car Speakers Car Electronics Crossover Network HTG137 BLACK

  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets..
Check Stock

AudioPipe APCL18001D 1800W Class D Monoblock Car Audio MOSFET Amplifier

  • ... ADJUSTABLE AMP: With a full MOSFET circuit design and simple bridging operation, this big amp is also phase, subsonic, level, and low-pass-filter adjustable. The included bass remote and knob aid with quick and easy control of the bass level..
  • QUALITY MONOBLOCK AMP: Our class-D monoblock amplifier is made with high-quality SMD components and double-sided FR-4 PCB for extreme mechanical strength. This amp has overload, short-circuit, thermal, and low-voltage protection to last for the long haul..
  • ALWAYS LOUD & CLEAR: For nearly two decades, Audiopipe has been a pioneer in high-performance audio equipment. Whether you’re a beginner or an experienced audiophile, our products will perform reliably and redefine the way you experience sound..
Check Stock

TORO TECH – R6, 8000 Watts MAX – 3200 Watts RMS 0.5Ω Stable Monoblock Car Amplifier Sound Quality Class D Design, Built-in Auto Sensing Turn-On, Subwoofer Amplifier

  • CHARGING UPGRADES REQUIRED: You will damage this amp operating it on a stock charging system. Powerful Monoblock Bass Amplifier: Puts out up to 2800W RMS @ 1 ohm with charging system upgrades (16V). Dial in the perfect tuning for your sub stage with the S1-2250.1’s subsonic and low-pass filtering. If you want to push SPL competition-level power, you can strap two S1-2250.1s..
  • Not for Everyday Stereo Systems: The S1-2250.1 is a Class D subwoofer amp for serious bassheads with serious charging systems at their disposal. This is an audio amplifier for cars with upgraded electrical systems. Know your charging specs before you buy this amp. You generally need 100 amp hours per 1000W. So, for a 2000W class D monoblock amplifier, you would need a 200 amp alternator..
  • Stays Cool as a Cucumber: Added heatsink and improved circuitry make for excellent cooling. This efficient class D monoblock amplifier design keeps more power flowing to your system instead of turning into heat, so you can play louder for longer..
  • Easy Install, even for Dummies: Set screw terminals connect easily to your power and speaker wire. Surface-mount feet make securely mounting the S1-2250.1 a cinch. To get everything you need for installation, check out the SoundQubed Zero Gauge amp kit....
Check Stock

Xtenzi 6 Pin Flex Cable Wire Accessory 91614-STW for Amplifier Remote Bass Knob Compatible with MTX XEBC XTL-EBC

  • Xtenzi Brand Remote Amplifier Level Controller Optional bass remote XT91614-STW..
  • Optional Wired Remote Volume Control Compatible with XEBC, MTX XTHUNDER series, XTHUNDER1500.1 and XTHUNDER1200.1, XTL-EBC, MTX XTL110P, XThunder Link, MTXRT8PT, MTXTR8PT, MWA035, older XThunder Series MTX amplifiers 1000XD, 600XD, 300XD, TH series monoblock amplifiers (1200.1D, 650.1D, 350.1D), and RT Series monoblock amplifier (RT1000D, RT500D, RT250D). MWA037,older RFL and JackHammer MTX amplifiers.
  • Controls the bass/gain from the front seat or remote location from amplifiers, without having to reach for the amplifier..
  • Allows you to adjust your Bass Level quickly and in the Most Ideal Location, easily mounts underneath a dash for an "out-of-sight' install or simple 1-wire connection gets you up and running in a flash..
  • High Quality Product Accessory comes with 5-meter (196 inch) remote connection wire only..
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • ...comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Power Supply Soft Turn on Circuit Frequency Response: 20Hz~250Hz Signal to Noise Ratio: 85dB.
  • Damping Factor: 150< Low Pass Filter (Variable): 50Hz~220hz Subsonic Filter: Off~50Hz Remote Bass Knob & Wire Included 1/0 Gauge Power and Ground Terminals Working Voltage: 8.5V-14.4V Fuse Rating: 200 Amp Dimensions: 17" (Length) x 6.3" (Width) x 2.2" (Height).
Check Stock