Categories

Best Monstrum Flashlight

Monstrum FMS200 200 Lumens Flashlight for Shotguns | Includes Universal Barrel Mount and Detachable Remote Pressure Switch

  • Tactical flashlight with a universal shotgun barrel mount designed for modular attachment to most full length shotgun models.
  • Powerful 200 lumens LED light suitable for indoor and close range outdoor use.
  • Included barrel mount secures between the barrel and magazine tube of most common shotgun models including the Mossberg 500/590/Maverick/88/835/930/935 and Remington 870.
  • Note that this product will not fit the Mossberg Shockwave or shotguns without a full length barrel and magazine tube.
  • Package also includes a picatinny rail mount that attaches to the opposite side of the barrel allowing for the attachment of other picatinny accessories.
  • All Monstrum flashlight products come with a lifetime guarantee.
Check Stock

Monstrum M-LOK 45 Degree Offset Scout Light Mount | Compatible with Surefire M300/M600 Series/Streamlight Protac Series

  • Dedicated mounting solution for Surefire M300/M600 Series and Streamlight Protac Series scout lights to your M-LOK mounting platform.
  • Fastens directly to your scout light with no additional adapters while the M-LOK mount installs seamlessly onto your M-LOK equipped rifle.
  • Offset design angles the flashlight to the side, allowing for more flexible hand or accessory placement without obstruction of the flashlight beam.
  • Package includes all necessary mounting hardware including Torx screws and hex wrench to prevent stripping.
  • All Monstrum products are now protected with our lifetime guarantee.
Check Stock

Monstrum M-LOK Accessory Pack | Includes 2-inch 3-inch 5-inch Rail Sections | Flashlight Sling and 45 Degree Offset Mounts

  • Included in this M-LOK Accessory Pack are: one 2 inch, one 3 inch, and one 5 inch M-LOK to picatinny rail section | one 1 inch diameter flashlight....
  • Accessories install to any M-LOK mounting platform, allowing for fast modular attachment of grips, bipods, sights, flashlights, slings, or other....
  • Package includes all necessary screws and locking nuts, plus a hex wrench. No additional tooling is required for installation..
  • Dedicated M-LOK flashlight and sling mount install seamlessly to M-LOK mounting platform without intermediary rail section.
  • All Monstrum mounts and accessory products comes with a lifetime guarantee..
Check Stock

Montrum 90 Degree Offset Picatinny Rail Mount

  • For 90 degree offset attachment of picatinny optics or accessories to Picatinnny mounting platforms.
  • 90 degree offset design allows for the mounting of a secondary sighting system or for more flexibility in accessory placement.
  • Picatinny rail section is 4 slots in length and will accommodate all standard Picatinny accessories, red dots, or optics.
  • Mount a magnification scope up top for medium range shooting and a red dot at a 90 degree angle for close quarter combat. Or mount your flashlight to....
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum M-LOK Weapon Light Pressure Switch Mount

  • Dedicated M-LOK mount for clean and precise placement of your weapon light pressure switch to your M-LOK mounting platform.
  • Snaps securely into place with no messy tape or cables required.
  • Ridged edges hold your pressure switch assembly in place without obstructing access to the switch.
  • Custom designed for use with Monstrum weapon lights including F07, F08, F10, F150, F200, FMS200, ML50, FP500, and FMK500 Series Flashlights.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Rifle Scope Level Bubble | 1 inch Diameter

  • The Monstrum Rifle Scope Level Bubble is a tool built to check for proper vertical alignment of your rifle.
  • Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant - An anti-cant level bubble corrects for this issue, allowing you to quickly check for proper alignment of your rifle before each shot..
  • The level bubble attaches to your rifle scope via the integrated ring mount.
  • Available in 1 inch, 30 mm, and 34 mm diameter versions.
  • All Monstrum optics and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Blackbird 1X Prism Scope | Black

  • The Monstrum Blackbird 1x Prism Scope is a prism scope optic with a fixed 1x magnification.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Comes with an integrated 1.5 inch riser that mounts to any standard picatinny mounting platform.
  • The Blackbird 1x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

Monstrum Blackbird 3X Prism Scope | Black

  • With a glass prism optic system the Monstrum Blackbird gives you true 3x magnification with crisper optics in a smaller package than traditional refracting lens rifle scopes.
  • The etched glass reticle illuminates in both red and green for a clean sight picture regardless of lighting or environment, visible with or without battery powered illumination source.
  • The single piece machined aluminum body is built with fewer moving parts and less points of failure to hold zero against the fiercest of recoil.
  • At 15 ounces with a newly designed lightweight 6061 aluminum scope body, the P332 Raven is out lightest prism scope to date..
  • All Monstrum scopes are backed by a one year warranty..
Check Stock

Monstrum P332 3X Raven Prism Scope | Black

  • With a glass prism optic system the Monstrum P332 Raven gives you true 3x magnification with crisper optics in a smaller package than traditional....
  • The etched glass reticle illuminates in both red and green for a clean sight picture regardless of lighting or environment, visible with or without....
  • The single piece machined aluminum body is built with fewer moving parts and less points of failure to hold zero against the fiercest of recoil.
  • At 15 ounces with a newly designed lightweight 6061 aluminum scope body, the P332 Raven is out lightest prism scope to date..
  • All Monstrum scopes are backed by a two year warranty..
Check Stock

The Complete Guide to Gunsmithing: Gun Care and Repair

  • The Monstrum Rifle Scope Level Bubble is a tool built to check for proper vertical alignment of your rifle.
  • Imperfect vertical alignment of your scope when shooting introduces scope cant error - horizontal drift of your shots due to cant - An anti-cant level bubble corrects for this issue, allowing you to quickly check for proper alignment of your rifle before each shot..
  • The level bubble attaches to your rifle scope via the integrated ring mount.
  • Available in 1 inch, 30 mm, and 34 mm diameter versions.
  • All Monstrum optics and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Raven 1.5X Prism Scope | Black

  • The Monstrum Raven 1.5x Prism Scope is a prism scope optic with a fixed 1.5x magnification.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produce less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Comes with an integrated 1.5 inch riser that mounts to any standard picatinny mounting platform.
  • The Raven 1.5x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock