Best Monstrum Tactical Rifle Scopes
Monstrum Lockdown Series Lightweight Riser Mount | High Profile | 5.5 inch L / 13 Slot
- Single piece machined aluminum with a hollow body profile, designed to shave precious ounces of weight off your rifle build.
- Redesigned locking nut fastens securely via hand, screwdriver, or wrench and is guaranteed to hold zero against the heaviest of recoil.
- 5.5 inches in length with 13 Picatinny rail slots, accepts all Picatinny or Weaver based scopes, red dots, or optics.
- High profile mount provides 0.92 inches of rise.
- All Monstrum Tactical Lockdown Series Riser Mounts come with a lifetime warranty.
Check StockHIRAM Cantilever Scope Ring Mount for 1' and 30mm Rifle Scopes with 2 Slot Raised Picatinny Rail Mounts, Adjustable Cantilever Mount
- FITS 1-INCH & 30MM SCOPES: This dual ring mount by Hiram fits pistol and rifle scopes with 30mm diameter tubes but includes gaskets to securely handle 1-inch scopes as well.
- the cantilever design allows scopes to be placed up to 2 inches forward for better eye relief and a fuller field of view.
- ROCK-SOLID BUILD: Our aircraft-grade 6061-T6 aluminum alloy offers superior strength and corrosion resistance while remaining a lightweight 11 ounces.
- the heat-treated torx screws lock this mount firmly into any 20mm Picatinny or Weaver rail.
- RINGTOP MOUNTS: The rings on this cantilever scope mount each include a 2 slot 20mm rail to easily attach additional targeting accessories like lasers, tactical flashlights, and red dots.
- HIGHLY ADJUSTABLE: This rifle scope mount's rings can also be adjusted forward or backward to any of seven 10mm (0.4") increments to fit all your favorite rifle scopes for hunting, shooting, tactical training, and more.
- SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to ensure its effectiveness and provide the highest-quality firearm accessory on the market.
- we back it with our usual strong warranty and friendly 24/7 customer service so you can be sure you'll enjoy its use for years to come!.
Check StockMonstrum S330P 3X Prism Scope | RM5-AH Adjustable Height Riser Mount with Quick Release | Monstrum Flip Up Lens Cover Set | Bundle
- Compact yet heavy duty prism sight with 3x magnification and 30mm objective lens, Ideal for rapid mid range target acquisition out to 500 yards..
- Features a glass prism optical system rather a refracting lens system like traditional scopes, allowing for better optical quality in a much smaller package..
- Unlike red dots, the reticle is visible with or without illumination, for a clean sight picture regardless of lighting or environment..
- Product bundle includes Monstrum Lockdown Series RM5-AH Picatinny riser mount with quick release and adjustable height design allowing for optimal placement of your optic based on rifle setup or preferred cheek weld.
- Product bundle includes a matching set of Monstrum Rubberized Flip Up Lens Covers. Spring loaded flip-up lens covers that rubberized sleeves that conform neatly around your rifle scope tube, protecting your expensive optics from dust and abrasion.
Check StockMonstrum High Profile Picatinny Riser Mount (1' H x 5.7' L), for Scopes and Optics
- 1-inch-high riser mount for scopes and optics, allows for sight clearance over front sights.
- 5.7 inches in length, Picatinny rail mount, will accommodate all Picatinny or Weaver standard scopes, red dots, and optics.
- See through design for use with iron sights.
- Sturdy and lightweight, 6 ounces in weight, crafted from aircraft grade aluminum.
- All Monstrum Tactical mount and accessory products come with a lifetime guarantee.
Check StockMonstrum One Piece Scope Mount for Marlin 336/1894/1895 Series Lever Action Rifles | Low Profile | 1 Inch Diameter
- Dedicated scope mounting platform built specifically for Marlin 336/1894/1895 Series lever action rifles.
- Rings are 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
- Scope mount base installs directly to the Marlin factory mounting holes via the included set screws with no additional mounting hardware required.
- Note that the low profile design may not accommodate scopes with large objective bells and that installation may require removal of your rear sight. Please measure scope mount dimensions against your scope before purchasing..
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check StockMonstrum 1-4x20 LPVO Scope with MH255 Offset Scope Mount and Flip Up Lens Covers | Black
- Tactical rifle scope providing crystal clear targeting at 1-4x magnification, with a 20mm objective diameter and an eye relief of 3.5-3.8 Inches.
- Glass rangefinder reticle for on-the-fly range estimation and long distance targeting.
- Lever controlled reticle illumination in both red and green with multiple brightness intensities.
- Product Bundle includes Monstrum H-Series One Piece Offset Scope Mount.
- comparable in weight to a pair of scope rings while maintaining the added rigidity and convenience of a one piece mount.
- Includes hardened steel Torx mounting hardware for mounting to any Picatinny rail platform..
- Product bundle includes a matching set of Monstrum Rubberized Flip Up Lens Covers. Spring loaded flip-up lens covers that rubberized sleeves that conform neatly around your rifle scope tube, protecting your expensive optics from dust and abrasion.
Check StockMonstrum Precision Picatinny Scope Rings | 1 inch Diameter | 0.80 inch Height
- 0.80 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek....
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
- Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockMonstrum Scope Mount with 45 Degree Offset Picatinny Rail Mount | 30 mm Diameter
- Dual ring scope mount for 30 mm tube scopes tubes with integrated 45 degree offset picatinny rail mount.
- 45 degree offset rail mount allows for mounting of secondary sighting system for use at closer ranges.
- Mounts to any flat top Picatinny rail equipped rifle platform.
- 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
- Monstrum mount and accessory products come with a lifetime guarantee.
Check StockMonstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.00 inch Height
- 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
- Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockMonstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.20 inch Height
- 1.20 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
- 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
- Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
- Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockMonstrum Precision Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height - Low
- 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
- Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
- 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
- Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
- Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check StockMonstrum Dual Ring Scope Mount for Savage Arms Axis/Edge Rifles | 1 Inch Diameter | Pre 9/2021 Models
- Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the Post 9/2021 compatible mount..
- Dedicated one piece dual ring scope mount built specifically for the Savage Arms Axis/Edge platform.
- 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
- Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check StockMonstrum Forester Scope Rings for Marlin 336/1894/1895 Lever Action Rifles | 1 inch Diameter | High Profile
- Dedicated scope rings built just for the Marlin 336/1894/1895 platform with no additional mounts or adapter necessary.
- Precision machined from 6061 grade aluminum, the rings attach directly to the factory mounting holes of your Marlin receiver with no additional hardware required.
- Available in both Medium and High profile center heights..
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock